Functions and services in this manual may differ from those in the actual vehicle.
Thank you for purchasing this KIA Motors Car Multimedia System. This user’s manual explains how to use the KIA Motors Car Multimedia System. Before using the product, read the contents of this user’s manual carefully and use this product safely. ↟↟ The screens shown in this manual may differ with the actual screens of the product. ↟↟ The design and specification of this product may change without prior notification for product improvement.
Table of Contents Table of Contents Table of Contents 3 Start Name of Each Component 5 Basic operation 8 HOME screen 12 Favorites 16 20 Searching for destination (Polstar) 27 Using the route menu (Polstar) 35 Settings for navigation (Polstar) 42 Checking on navigation system (Polstar) 51 Getting started with navigation (NNG) 53 Searching for destination (NNG) 59 Using the route menu (NNG) 68 Settings for navigation (NNG) 74 80 Bluetooth audio 86 Voice memo 88 116 Favourites
Start 시작하기
Name of Each Component Name of Each Component Head unit Head unit functions may vary for each model. POWER PUSH or PWR / Volume knob ↟↟ Press to turn the power on. ↟↟ When power is on, press and hold to turn power off. ↟↟ When power is on, press to turn Audio off. ↟↟ Turn left/right to control volume. HOME button (AV only) ↟↟ Press to go to the home screen. PHONE button (AV only) ↟↟ Press to go to the phone screen. MAP button (AVN only) ↟↟ Press to display the map screen of the current location.
Name of Each Component RADIO button ↟↟ Press to go to the radio screen. MEDIA button ↟↟ Press to go to the available media. SETUP button ↟↟ Press to go to the settings screen. Tune/Enter knob ↟↟ In Radio mode, turn left/right to change the frequency or station. ↟↟ In Media mode, turn left/right to change file and press to select the desired file. Steering Wheel Remote Control Steering wheel remote control functions may vary for each model.
Name of Each Component Z button ↟↟ Press to end the phone call during a call. ↟↟ Press to reject the call in the incoming call screen. ↟↟ Press to end Voice memo recording. J / I button ↟↟ Increases or decreases the volume level. d (Mute) ↟↟ Press to mute the sound. (It will be paused in some media modes.
Basic operation Basic operation System ON/OFF The image of this product may be different from the actual product. Starting the system for the first time 1. Press the Engine Start button. Once the system is turned on, the booting process will start and the safety warning page is displayed. 2. Press [Confirm]. If you want to change the system language, press [Language]. , Note ↟↟ You cannot operate the system while it is booting up. It may take some time for all of the features to be ready.
Basic operation AV ON/OFF or Volume Adjustment AV OFF Press Power button on the head unit when the AV is ON. AV ON Press Power button on the head unit when the AV is OFF. Adjusting the volume Turn the Volume knob to control volume. , Note When you turn the system off, the current volume level is automatically memorised. Whenever you turn the system on, it operates at the memorised volume level if you do not set the startup volume in sound Sound settings menu.
Basic operation General Operation of the Menu in available Mode Split screen This feature is used to set the item to be displayed on the right side of the screen by setting a checkmark on the menu drop-down. 1. Press [Menu] on the submenu screen. 2. Press [Split screen]. 3. You can select the desired item by dragging downwards or upwards on the split screen.
Basic operation Sound Settings This menu is used to adjust the sound effects for the whole system. 1. Press [Sound Settings] on the pop-up menu of available mode. 2. For more details, refer to the "Sound Settings". Display Settings This menu is used to control the display settings for the whole system. 1. Press [Display Settings] on the pop-up menu of available mode. 2. For more details, refer to the "Display Settings".
HOME screen HOME screen Configuration for Home screen The detailed menu in each layout can be adjusted by user. 1 2 3 a Menu ↟↟ Editing the [Edit Home widgets] or [Edit Home icons]. b Home widget ↟↟ You can edit the desired widget on the widget menu. ↟↟ Press the area to edit home widget. c All menus Scroll the Home screen sideways to move to all the items of the system menu. ↟↟ [Phone]: Operates bluetooth hands-free and audio function. ↟↟ [Android Auto]: Runs android auto function.
HOME screen ↟↟ [Apple CarPlay]: Runs Apple CarPlay function. ↟↟ [Radio]: Converts to the last played radio mode. ↟↟ [USB Video]: Converts to the last played USB video mode. ↟↟ [Navigation]: Moves to the Navigation menu. ↟↟ [Settings]: Moves to the settings menu. ↟↟ [Hybrid] (HEV vehicle only): Moves to the Hybrid menu. Editing Home widgets 1. Press [Menu] > [Edit Home widgets] on the Home screen. 2. Replace or move widgets by pressing and dragging them. 3. Press [;] on the screen.
HOME screen Basic operation of Home screen 1. Press [A] on the screen in any mode. 2. Select the desired menu on the Home screen. 3. Subsequent operations will be performed according to the desired menu selection.
HOME screen Customizing HOME screen 1. Press and hold the desired menu icon on the All Menu screen. Or Press [Menu] > [Edit Home Icons]. 2. Select the desired menu item from the list, then drag and drop it to a desired place. 3. Press [;] on the screen. , Note Press [Default] to reset all the All menus screen screen.
Favorites Favorites Adding your favourite If your favorites menu items have been already saved in the Favorites menu, it can be easily accessed. 1. Press [Favourites] on the Home screen. 2. Press [Add to favourites]. If your favourites menu items are already added, press [Menu] > [Add]. 3. Select one of the categories.
Favorites 4. Press [Add] > [Yes]. ↟↟ [Mark all]: Marks all items. ↟↟ [Unmark all]: Unmarks all items. , Note ↟↟ Press [;] to move to the previous screen. ↟↟ Up to 24 menu items can be added to Favourites. ↟↟ If you select the menu item added to Favourites, it moves to the corresponding screen. Rearranging your favourite menu 1. Press [Favourites] on the Home screen. 2. Press [Menu] > [Rearrange]. 3. Select the desired menu item from the list, then drag and drop it to a desired place. 4. Press [;].
Favorites Deleting your favourite menu 1. Press [Favourites] on the Home screen. 2. Press [Menu] > [Delete]. 3. Select the desired items, then press [Delete] > [Yes]. ↟↟ [Mark all]: Marks all items. ↟↟ [Unmark all]: Unmarks all items. , Note Press [;] to move to the previous screen.
시작하기 Navigation (If Equipped)
Getting started with navigation (Polstar) Getting started with navigation (Polstar) Precautions for safe driving Please observe and comply with local traffic rules and regulations. ↟↟ The route displayed for destination guidance is a reference and the route guidance will take you to the vicinity of your destination. The highlighted route is not always the shortest distance, the least congested, and in some cases, might not be the fastest route.
Getting started with navigation (Polstar) Acquiring satellite signals Before the unit can determine your current position and navigate a route, you must do the following steps: 1. Go outside to an area free from tall obstructions. 2. Turn on the unit. Acquiring satellite signals can take a few minutes. Operating navigation screen The navigation system displays various information on the map screen. Map screen Press [MAP] or [NAV] > [Map] to access the map screen.
Getting started with navigation (Polstar) e Map view button Changes the map view perspectives. Press [ ] repeatedly to switch them. ↟↟ 2D North-up: The map always points north regardless of the direction that the vehicle is moving. ↟↟ 2D Heading-up: The map always displays the vehicle’s direction as proceeding towards the top of the screen. ↟↟ 3D Heading-up: The map always displays the basic outline and details of the surrounding roads and general area.
Getting started with navigation (Polstar) Quick menu 1. Press [ ] on the map screen. 2. Press the desired item. ↟↟ [ ]: Press [ ] to open or close the sub menu. ↟↟ [ ]: Cancels the route when it is set. ↟↟ [ ]: Moves to the home. Enable the button by saving a location as favorite and set as home. ↟↟ [ ]: Moves to the sound settings screen. ↟↟ [ ]: Finds a destination by searching for POI near the current position. ↟↟ [ ]: Starts simulation when the route is set.
Getting started with navigation (Polstar) Sound setting for navigation 1. Press [ ] on the quick menu. 2. Set the guidance volume of navigation by pressing [a] / [d], then press [Apply]. , Note You can access the sound setting menu for navigation by pressing [b] > [Sound]. Scrolling the map screen Drag and drop the map screen to the desired direction, then touch the desired point. Information on the point is displayed on the screen. It can be used as an electronic map.
Getting started with navigation (Polstar) c[ / ] button [ / ] button to set the zoom level on the map screen. d[ ] button Moves to the main menu of navigation. e Displays scale ruler. f Selected location mark Displays selected location (road or POI) with information panel about it. Main Menu 1. Press [NAV] or touch anywhere on the map screen. 2. Press the desired option. ↟↟ [Find]: Finds a destination by using the [Find] menu. ↟↟ [Map]: Moves to the map screen or navigation/free run screen.
Getting started with navigation (Polstar) Sub-menu operation All sub-menus of navigation have the following features at the top of the screen. ↟↟ [ ]: Moves to navigation/free run screen. ↟↟ [ ]: Moves to the main menu. ↟↟ [ ]: Moves to the previous screen.
Searching for destination (Polstar) Searching for destination (Polstar) Address search You can find the destination by searching for an address. 1. Press [Find] > [Address]. 2. Enter the city name, then press [Done].
Searching for destination (Polstar) 3. Select the desired item from the list (over and over). ↟↟ If you want to search for a list of nearby POIs or streets, press [Nearby]. ↟↟ If you want to save the location as the [My Favorite], press [Save As]. ↟↟ If you want to know information about the selected location, press [Info]. ↟↟ If you want to add intermediate waypoint in route to your destination or set the location as the start point to simulate the route, press [Advanced]. 4. Press [Go To].
Searching for destination (Polstar) When searching for POI by [Nearby] in [POI] 1. Press [Find] > [POI]. 2. Press [Nearby], then select one of the [Around City]/[Near Car]. 3. 1) When selecting the [Around City], follow steps 2-4 of the “Address search”. 2) When selecting the [Near Car], follow steps 3-4 of the “Address search”.
Searching for destination (Polstar) When searching for POI by [Phone] in [POI] 1. Press [Find] > [POI] > [Phone]. 2. Enter a phone number, then press [Done]. 3. Follow steps 3-4 of the “Address search”. Keyword search You can find the destination by searching for a key word. 1. Press [Find] > [Keyword]. 2. Enter a key word, then press [Done].
Searching for destination (Polstar) 3. Select one of the [POI], [City Center], [Street], [All]. 4. Follow steps 3-4 of the “Address search”. Favorite If your favorites are already in the [Favorite] menu, they can be easily retrieved by pressing them. First of all, store a favorite through [Save As] of the “Address search” in order to activate the [My Favorite] menu. Then, you can store favorites in the [My Favorite] menu. Adding favorite 1. Press [ ] > [My Favorite]. 2.
Searching for destination (Polstar) 3. Press [OK]. 4. Press [ ] to change the name and you can select Most Favorite, Home or Location, then press [Save]. It is saved in the [My Favorite] menu automatically. , Note You can also store a favorite in the [My Favorite] menu through [Save As] of the “Address search”. Finding favorite 1. Press [Find] > [Favorite]. 2. Follow steps 3-4 of the “Address search”. Viewing favorite 1. Press [ ] > [My Favorite]. 2.
Searching for destination (Polstar) Deleting favorite 1. Press [ ] > [My Favorite]. 2. Select the desired item from the list, then press [Delete] > [Yes]. Recent The destinations set through the search function are automatically saved in the [Recent] menu. You can reset them as the destination from the [Recent] menu. 1. Press [Find] > [Recent]. 2. Follow steps 3-4 of the “Address search”. Coordinate You can find a destination by entering the coordinates of latitude and longitude. 1.
Searching for destination (Polstar) Category You can search for a POI by the [Category] menu. 1. Press [Find] > [Category]. 2. Follow steps 3-4 of the “Address search”. Current Position Press [Current Position] if you want to know information on the current positon. 1. Press [Find] > [Current Position]. 2. Follow steps 3-4 of the “Address search”.
Using the route menu (Polstar) Using the route menu (Polstar) Itinerary The itinerary is a list of users who have defined their way points to their destination. The itinerary can be added/deleted/edited and its order can be changed. Adding itinerary's way points 1. Press [Route] > [Itinerary]. 2. Press [Add]. 3. Select a way point through the destination search function, then press [OK]. 4. If you want to add a way point (over and over), follow steps 2-3. 5.
Using the route menu (Polstar) Viewing the route information 1. Press [Route] > [Itinerary]. 2. Press the desired item from the list. 3. Press [Info] to check information on what you select. Press [Map] to switches to the map screen again. Saving itinerary to [My Itinerary] If the itineraries are already saved in the [My Itinerary] menu, they can be easily retrieved to set the route. First of all, you can save a itinerary to the [My Itinerary] menu when you add the Itinerary’s way points. 1.
Using the route menu (Polstar) Rearranging itinerary's way points 1. Press [Route] > [Itinerary]. 2. Press [Edit]. 3. Select the desired item from the list, then press [Move Up] or [Move Down]. 4. Press [Done]. Vacating itinerary's way points from [Itinerary] This operation doesn’t mean the itinerary saved in the [My Itinerary] menu is deleted, but mean the itinerary from the [Itinerary] menu is vacated. 1. Press [Route] > [Itinerary]. 2. Press [Edit]. 3.
Using the route menu (Polstar) Deleting itinerary from [My Itinerary] 1. Press [ ] > [My Itinerary]. 2. Select the desired item from the list, then press [Delete]. 3. Press [Yes]. Route Options You can modify various route options according to your needs. 1. Press [Route] > [Route Options]. 2. Set the desired options, then press [Apply]. ↟↟ [Routing Method]: This option allows you to set the routing method as the Shorter (distance), Faster (time).
Using the route menu (Polstar) Turn List This function allows you to view the distance to the next guide point and the turning direction at that guide point. 1. Press [Route] > [Turn List]. 2. Press the desired items to view a turn. A map showing the location of the turn is loaded. Best Fit You can check the entire route between your current location and your destination. Press [Route] > [Best Fit].
Using the route menu (Polstar) Demo This function allows the user to simulate a route guidance when a route is set. 1. Press [Route] > [Demo]. ↟↟ [1x], [2x], [4x], [Full]: Set the speed of driving simulation by pressing [a] / [d]. ↟↟ [Repeat]: Select whether to repeat driving simulation. 2. Press [Start Demo]. ↟↟ [U / V]: Pauses or plays the driving simulation. ↟↟ [Z]: Ends the driving simulation. ↟↟ [c]: Sets the speed of driving simulation slowly. ↟↟ [v]: Sets the speed of driving simulation fastly.
Using the route menu (Polstar) Bypass Waypoint The route is recalculated to bypass way point around the location or street when an itinerary has more than 2 way points. Press [Route] > [Bypass Waypoint] > [Yes]. Detour The route is recalculated to take a detour around the location or street. 1. Press [Route] > [Detour]. 2. Select the desired item from the list. The route is recalculated and the map screen is displayed automatically.
Settings for navigation (Polstar) Settings for navigation (Polstar) Settings The navigation system offers a high degree of personalization settings as well as normal system settings. Press [b] on the main menu screen to change the software settings of navigation. Map For dual language map, this option could be selected to dispaly the default language on the map screen. 1. Press [b] > [Map]. 2. Select the desired language displayed on the map screen by pressing [a]/[d], then press [Apply].
Settings for navigation (Polstar) Display This menu allows you to change the display features used by the navigation. You can adjust the colour scheme to suit your current lighting conditions for ease of visibility and font size. 1. Press [b] > [Display]. 2. Select the desired options by pressing [D] > [Done] or pressing [a] / [d]. 3. Press [Apply]. Language This menu allows you to change languages in using the navigation system. 1. Press [b] > [Language]. 2.
Settings for navigation (Polstar) POI Icon All POI icons or several POI icons can be revealed or hidden on the map screen for the improvement of visibility. 1. Press [b] > [POI Icon]. 2. Select the desired items to reveal or hide them, then press [Done]. ↟↟ [Show All]: Shows all POI icons on the map screen. ↟↟ [Hide All]: Hides all POI icons on the map screen. Guidance This menu allows you to adjust Map Orientation and set Auto Zoom, Approaching View, Turn PIP and Next Street as Enable/Disable. 1.
Settings for navigation (Polstar) Unit This menu allows you to change the measurement units (distance) in using the navigation system. 1. Press [b] > [Unit]. 2. Select the desired option by pressing [a] / [d], then press [Apply].
Settings for navigation (Polstar) Speed Alert You can set whether you will be notified about speed cameras on the map screen and warned against driving too fast. , Note The Speed Camera feature will differ according to region. 1. Press [b] > [Speed Alert]. 2. On each screen, select the desired options by pressing [a] / [d], then press [Apply].
Settings for navigation (Polstar) Sound You can set the sound setting for navigation. For example, you can set Mute as On/Off and adjust the guidance volume of navigation. 1. Press [b] > [Sound]. 2. Select the desired options by pressing [a] / [d], then press [Apply]. , Note You can access the sound setting menu for navigation by pressing [ menu.
Settings for navigation (Polstar) Trail To enable the trail function, you can log the trail. You can set the file name to save, interval and file size. When the file size reach the set value, the navigation system stops logging the trail. 1. Press [b] > [Trail]. 2. Select the desired options by pressing [D] / [a] / [d], then press [Start Log]. ↟↟ [Name]: Change the trail’s name, then press [Done]. ↟↟ [Interval]: Set the interval as 1sec, 3secs, 5secs, 10secs, 1min, 5mins.
Settings for navigation (Polstar) Safe Mode This menu allow you not to touch the screen when the vehicle speed is above 40km/hr. This is to prevent you form dangerous operation when driving. To touch the screen is possible when the vehicle speed is below 40km/hr. 1. Press [b] > [Safe Mode]. 2. Set the safe mode as On/Off by pressing [a] / [d], then press [Apply]. Pray time The function will remind you when pray time is approaching.
Settings for navigation (Polstar) Update When users intend to update the map and insert the USB flash (map pre-installed) into the navigation device, the Update button will be enabled. You can visit http://kia.polstargps.com to get additional content, such as new maps and useful applications. 1. Press [b] > [Update] 2. To update your Navigation, please follow the instructions on the screen.
Checking on navigation system (Polstar) Checking on navigation system (Polstar) Information route, itineraries, destinations, locations, and maps. Press [ ] on the main menu screen. ↟↟ [GPS]: Accesses information about satellite coverage, current time, longitude, latitude, altitude, quality of the signals received and the status. ↟↟ [Statistics]: Accesses information about your current location, heading, velocity, time, etc.
Checking on navigation system (Polstar) My Data In My Data, the navigation system offers the UI to access your personal data such as My Favorite, My Itinerary and My Trail. You can save, edit or delete the personal data for the conveniences of next time usage. Press [ ] on the main menu screen. ↟↟ [My Favorite]: You can edit your favorite destinations by accessing the my favorite menu. ↟↟ [My Itinerary]: You can retrieve a planned itinerary by pressing Load button.
Getting started with navigation (NNG) Getting started with navigation (NNG) Precautions for safe driving Please observe and comply with local traffic rules and regulations. ↟↟ The route displayed for destination guidance is a reference and the route guidance will take you to the vicinity of your destination. The highlighted route is not always the shortest distance, the least congested, and in some cases, might not be the fastest route.
Getting started with navigation (NNG) Acquiring satellite signals Before the unit can determine your current position and navigate a route, you must do the following steps: 1. Go outside to an area free from tall obstructions. 2. Turn on the unit. Acquiring satellite signals can take a few minutes. Viewing map screen Press [MAP] button to access the map screen.
Getting started with navigation (NNG) c Returning to the previous screen Press the Back button to return to the previous screen. You can also press and hold this button to quickly return to the navigation view from any other screen. d Selecting a destination Select the cursor location as a new destination. The route is automatically calculated. e Checking location information The location of the cursor can be used as the destination of the route or a new Alert Point.
Getting started with navigation (NNG) Operating navigation screen The navigation system displays various information on the map screen. 10 1 9 2 8 3 4 5 6 7 a Next turn It shows the type of the next manoeuvre and its distance. b Second next turn preview It shows the type of the second next manoeuvre if it is near the first one. c Speed limit warning It shows the current speed limit of the road. d Data fields ↟↟ The estimated time of the arrival at the destination. ↟↟ The remaining time of the trip.
Getting started with navigation (NNG) g Navigation menu The menu button appears when the navigation view is displayed. Press it to open the navigation menu. h Planned route The planned route is displayed as an orange line. i Sound settings Adjust the different sound volumes. j Next street It displays the name of the next street. Using the navigation menu On the navigation view, press [ ] to open the navigation menu.
Getting started with navigation (NNG) d Settings Customise the way the navigation software works. e Update Visit https://www.naviextras.com to get additional content, such as new maps or useful applications. f About See information about the navigation software. With a planned route, the following menu options are also available: 11 7 8 12 9 10 13 g Add Waypoint Add an intermediate destination to your route.
Searching for destination (NNG) Searching for destination (NNG) Selecting destination You can initiate a separate search for addresses, places, saved locations or recent destinations. Using combined search You can find the destination by using for combined search. 1. Press [ ] > [New Route]. 2. Press [Search in All].
Searching for destination (NNG) 3. Enter Name or address then most likely result appears below the input field. 4. Select the desired item from the list (over and over). If the new search area is in a different city, start entering the city, ZIP code. 5. Press [Select as Destination]. 6. Press [Start Navigation].
Searching for destination (NNG) Selecting an address Using the same screen, you can find an address by entering the following information: (exact address, including the house number, centre of a town, midpoint of a street, intersection, starting the search with the postal code) You can find the destination by entering for an address. 1. Press [ ] > [New Route]. 2. Press [Address]. 3. Enter country name, city or ZIP code and street name, then press [Go to City].
Searching for destination (NNG) 4. Press the [Select as Destination]. 5. Press [Start Navigation]. Selecting a place of interest You can search for places of interest in the [Places] menu. Using the same screen, you can find a place by selecting one of the following options: (Quick search categories, Searching for a Place by its name, category) Using quick search categories The quick search feature helps you quickly find the most frequently selected types of places. 1. Press [ ] > [Places].
Searching for destination (NNG) 2. Select an item from the quick search categories or press [Search by Name or Category] to search by Name. The places in the list can be reordered by pressing [ displaying all listed icons on the map screen. 3. Press [Select as Destination]. 4. Press [Start Navigation].
Searching for destination (NNG) Finding help nearby To quickly search for nearby assistance, perform the following steps: 1. Press [ ] on the navigation view to access the navigation menu. 2. Press [Useful Information] > [Help Nearby]. To quickly search for nearby assistance, perform the following steps: ↟↟ [Car Repair]: Car repair and roadside assistance services. ↟↟ [Health]: Medical and emergency services. ↟↟ [Police]: Police stations. ↟↟ [Petrol Station]: Petrol stations. 3.
Searching for destination (NNG) 2. Press [Saved Location]. The list of saved locations is displayed. It contains two pre-set categories: Home and Work. 3. Press the location that you want to set as your destination. 4. Press [Select as Destination]. 5. Press [Start Navigation]. Selecting a history item The destinations that you have used earlier appear in the History list. The more you use the navigation software, the better it can guess your desired destination. 1. Press [ ] > [New Route]. 2.
Searching for destination (NNG) Selecting a saved route The routes that you have saved earlier appear in a list. To select a previous route, perform the following steps: 1. Press [ ] on the navigation view to access the navigation menu. 2. Press [New Route] > [Saved Routes]. 3. Select a route and the Multipoint Route screen appears. If necessary, modify the saved route. Otherwise, press [Calculate Route]. 4. Press [Select as Destination]. 5. Press [Start Navigation].
Searching for destination (NNG) Entering coordinates To select a destination by entering its coordinates, perform the following steps: 1. Press [ ] on the navigation view to access the navigation menu. 2. Press [New Route] > [Coordinates]. 3. Enter the latitude and longitude values. If necessary, press [ ] > [UTM Coordinates] and enter the coordinate in UTM format. 4. Press [OK] > [Go!]. A full screen map appears with the selected point in the middle.
Using the route menu (NNG) Using the route menu (NNG) Planning a multipoint route To build your route destination-by-destination, perform the following steps: 1. Press [ ] on the navigation view to access the navigation menu. 2. Press [Multipoint Route]. There is only one line in the list of route points, the starting point of the route, which is normally the current GPS position. 3. Press [Destination +] to select the destination. The [New Route to...
Using the route menu (NNG) Checking route information and alternatives To get a map overview of the planned route and check different parameters of the planned route, perform the following steps: 1. Press [ ] on the navigation view to access the navigation menu. 2. In the navigation menu,Press [Route Summary]. Editing the route When navigation has already started, there are several ways to modify the planned route.
Using the route menu (NNG) 4. Select the starting point of the route the same way you select a destination. 5. You can see the new starting point on the map. Press [Set Starting Point] and the multipoint route screen appears where you can continue adding a destination to your route. 6. Press [Calculate Route] to continue. Adding an additional destination To add a new intermediate destination to the planned route, perform one of the following actions: ↟↟ Press the map anywhere to browse it.
Using the route menu (NNG) Saving the planned route To save the planned route, perform the following steps: 1. Select a destination as described earlier and press [Select as Destination]. 2. Press [ ] > [Save Route]. 3. Type in a name and press [ ]. The route is saved and it is available in [New Route] > [Saved Routes]. Deleting the planned route You have the following two options to delete the navigated route: ↟↟ Press [ ] to delete all the destinations, or optimise the waypoints or the route.
Using the route menu (NNG) Selecting a route alternative when planning the route To select from different route alternatives or change the route planning method after you have selected a new destination, perform the following steps: 1. Select a destination as explained earlier and go to the route confirmation screen. 2. Press [Alternatives]. 3. You can see the basic details of route alternatives. Press any of them to see it on the map. 4.
Using the route menu (NNG) Selecting a route alternative for an existing route To recalculate the planned route with a different route planning method and to compare different route alternatives, perform the following steps: 1. Press [ ] on the navigation view to access the navigation menu. 2. You can access the list of route alternatives from the navigation menu in one of the following ways: ↟↟ Press [Detours & Alternatives] > [Alternative Routes]. ↟↟ Press [Route Summary] > [Alternative]. 3.
Settings for navigation (NNG) Settings for navigation (NNG) Saving a location To add any location to the saved locations (the list of frequently used destinations), perform the following steps: 1. Select a destination as described before. It can be an address, a place, any location on the map, a previously used destination from history, and so on. 2. When the map appears with the selected location in the middle, press [ ]. 3. Press [Save Location].
Settings for navigation (NNG) Editing a saved location To edit a location that you have already added as a Saved Location, perform the following steps: 1. On the navigation view, press [ ] > [New Route] > [Saved Location]. The list of Saved locations is displayed. 2. Press [ ] > [Edit]. 3. Press the location you want to edit, press [Rename] and enter the name of the location on the keyboard. 4. Press [ ] > [Done].
Settings for navigation (NNG) Adding an alert point You can save any map location as an alert point, for example a speed camera or a school zone. Before using alert point, you have to set the [Alert Point Warnings] in the settings. 1. In the navigation view, select the alert point. The red cursor [ 2. Press [ ] appears there. ]. 3. Scroll down the list and press [Add Alert Point]. 4.
Settings for navigation (NNG) Useful information menu The Useful Information menu provides various additional functions. It can be found in the navigation menu. ↟↟ [Where Am I]: Shows information on the current position (latitude, longitude, nearest town, next crossing street, and so on) or the last known position if GPS reception is not available. ↟↟ [Help Nearby]: Offers assistance near your current position.
Settings for navigation (NNG) Settings menu You can configure the navigation settings and modify the behaviour of the navigation, by pressing [ ] > [Settings]. ↟↟ [Route Preferences]: Select the road types used in route planning, the route planning method and road types for the route. ↟↟ [Sound]: Adjust the different sound volumes. [Master], [Voice], [Alerts], [Ding], [Voice Guidance,Early Indication of Maneuvers] and [Verbosity Level].
Media 시작하기
Playing USB Playing USB Playing USB Music You can play music files saved in a USB memory device. Connect an USB device to the USB port. Playback will start automatically. , Note ↟↟ To play USB Music while a different source is playing, press [MEDIA] > [USB Music]. ↟↟ Press [Menu] > [Songs for this artist] or [Songs for this album] to move to the list menu screen. Pause You can pause the playing file. Press [M] on screen. Press [d] on screen to play it again. Skip You can play the previous or next file.
Playing USB Search You can rewind/fast forward to a specific point of a file. Position Description Screen Press and hold [C / V] and then release at the point you want. , Note When you drag or touch the desired part on the progress bar, the music of the selected part plays. Hide current file You can hide the current playing file in USB. 1. Press [G]. 2. Press [Yes]. , Note ↟↟ Audio is not available while processing. ↟↟ Hidden files are stored in the Hide folder and it can be checked on your PC.
Playing USB List You can play the desired file by searching for the file list of the USB Menu. 1. Press [List]. 2. Press the desired file after searching for a category. The category can be sorted by [File], [Artist], [Song], [Album] or [Recently added]. , Note ↟↟ Press [t] to move to an upper folder. ↟↟ If you want to play the entire file in the list, press [Play all]. Using the list menu 1. Press [Menu] on the list screen. 2. Press [Show current track].
Playing USB Playing USB Video You can play video files saved in a USB memory device. Connect a USB device to the USB port and playback starts automatically. , Note ↟↟ To play USB Video while a different source is playing, press [MEDIA] > [USB Video]. ↟↟ Video is not available while driving. (Because of traffic regulations, video is only available while the vehicle is stopped or the transmission lever is put to P position.) Pause You can pause the playing file. Press [M] on screen.
Playing USB Search You can rewind/fast forward to a specific point of a file. Position Screen Description Press and hold [C / V] and then release at the point you want. , Note When you drag or touch the desired part on the progress bar, the vedio of the selected part plays. List You can play the desired file by searching the file list included in USB. 1. Press [List]. 2. Press the desired file. Using the list menu 1. Press [Menu] on the list screen. 2. Press [Now playing].
Playing USB Repeat The current playing file is played repeatedly. 1. Press [k]. 2. Select the desired mode by pressing [k] repeatedly. ↟↟ [k]: Plays all files sequentially. ↟↟ [l]: Repeats all files within the current folder. ↟↟ [n]: Repeats the current track. File information This feature shows the name, resolution and playback time information of the file. 1. Press [Menu] > [Info] or [ ]. 2. Press [Close].
Bluetooth audio Bluetooth audio Playing Bluetooth audio ↟↟ Music saved in the mobile phone can be played in the car through Bluetooth audio streaming. ↟↟ Bluetooth audio can be played only when a Bluetooth® phone has been connected. To play Bluetooth audio, connect the Bluetooth phone to the car system. For more information on connecting Bluetooth, please refer to the “Pairing and connecting the unit and a Bluetooth phone” part.
Bluetooth audio Pause You can pause the playing file. Press [M] on screen. Press [d] on screen to play it again. Skip You can play the previous or next file. Position Description ↟↟ Press [C / V]. Screen ↟↟ Pressing [C] after 3 seconds of playback time plays the current file from the beginning. Bluetooth connections or Bluetooth settings 1. Press [Menu] > [Bluetooth connections] or [Bluetooth settings]. 2. For more details, refer to the “Bluetooth”.
Voice memo Voice memo Making a voice memo Press [Voice memo] on the All menus screen. Record Start/Pause/Stop the voice memo. Position Description ↟↟ To run voice memo, touch [X]. Screen ↟↟ To pause voice memo, touch [M] during recording. If you want to restart the voice memo, touch [X]. ↟↟ To stop voice memo, touch [Z] during recording.
Voice memo Playing a voice memo Press [Voice memo] on the Home screen. To play a desired voice memo, select it in the voice memo list. Pause You can pause the playing file. Press [M] on screen. Press [d] on screen to play it again. Skip You can play the previous or next voice memo. Position Description ↟↟ Press [C / V]. Screen ↟↟ Pressing [C] after 3 seconds of playback time plays the current file from the beginning. Search You can rewind/fast forward to a specific point of a voice memo.
Voice memo Deleting voice memo 1. Press [Menu] > [Delete] on the voice memo screen. 2. Select the voice memo to delete and press [Delete] > [Yes]. ↟↟ [Mark all]: Marks all items. ↟↟ [Unmark all]: Unmarks all items.
Voice memo Saving voice memo on a USB 1. Press [Menu] > [Save to USB] on the voice memo screen. 2. Select the voice memo to save and press [Save] > [Yes]. ↟↟ [Mark all]: Marks all items. ↟↟ [Unmark all]: Unmarks all items. , Note ↟↟ You can save in the USB device formatted as FAT16/32, exFAT, NTFS. ↟↟ When saving to USB, the voice memo is saved in the voice memo folder. Checking storage space information 1. Press [Menu] > [Memory] on voice memo screen. 2. Check the storage space of the head unit.
Radio 시작하기
Listening to AM Listening to AM 1. Press [RADIO] on the head unit. 2. Press [Band] > [AM] on the screen. The AM screen of the most recent listened station is displayed. , Note Each time the [RADIO] button on the head unit is pressed, the mode is changed in the order AM > FM > AM. Auto tuning Press A SEEK/TRACK D on the head unit or W/S button on the steering wheel. Search and play previous/next available station. Manual tuning Turn left/right the Tune/Enter knob on the head unit.
Listening to AM Opening the AM station list You can see the station list with superior reception. Press [List]. Auto search This function lets you automatically search the broadcast stations with superior reception. 1. Press the desired broadcast station. 2. Press [List] > [Refresh].
Listening to AM Saving AM Favourites It manually saves the selected frequency to the desired favourites list. 1. Select the desired frequency. 2. Press [Favourites]. 3. Press the desired favourites section or [J]. If you want to overwrite an existing favourites, press and hold the respective favour ites section. , Note When the frequency is saved on a preset of which another frequency has already been saved, the previously saved frequency is erased.
Listening to FM Listening to FM 1. Press [RADIO] on the head unit. 2. Press [Band] > [FM] on the screen. The FM screen of the most recent listened station is displayed. , Note Each time [RADIO] button on the head unit is pressed, the mode is changed in the order FM > AM > FM. Auto tuning Press A SEEK/TRACK D on the head unit or W/S button on the steering wheel. Search and play previous/next available station. Manual tuning Turn left/right the Tune/Enter knob on the head unit.
Listening to FM Favourites tuning Press [Favourites]. Or Press the favourites numbers of the desired broadcast station. , Note ↟↟ FM broadcasts are transmitted at high frequencies and do not bend following the earth’s surface. Because of this, FM broadcasts generally begin to fade at short distances from the station. Also, FM signals are easily affected by buildings, mountains or other obstructions. These can result in undesirable listening conditions and show wrong information (ex. RDS PS NAME, etc.
Listening to FM Saving FM Favourites It saves the listening station to the desired favourites list. 1. Select the desired frequency. 2. Press [Favourites]. 3. Press the desired favourites section or [J]. If you want to overwrite an existing favourites, press and hold the respective favour ites section. , Note When the frequency is saved on a preset of which another frequency has already been saved, the previously saved frequency is erased.
Listening to FM Deleting Favourites This function delete the frequency saved to AM/FM presets. 1. Press [Menu] > [Delete favourites] on the AM/FM screen. 2. Select the desired item(s), then press [Delete] > [Yes]. ↟↟ [Mark all]: Selects all items. ↟↟ [Unmark all]: Unmarks all items. , Note If you want to delete an existing favourites, press [K] > [Yes] on the screen. Set number of favourites This feature allows you to set the number of favorites. You can set a maximum of 40 to a minimum of 10. 1.
Listening to HD Radio™ Listening to HD Radio™ You can turn HD radio on from the menu and listen to HD Radio Broadcasts. The HD Radio screen is displayed only when a HD Radio broadcast is being received. HD Radio™ screen 1 2 3 a HD Channel Number ↟↟ HD Channel number saved in preset. ↟↟ Preset tuning: From the 40 presets, select the HD Channel you want to listen to. b Broadcast Information Displays detailed information about the current broadcast.
Listening to HD Radio™ HD Radio™ On/Off 1. Select the band (FM, AM) you want. If an HD Radio broadcast is received, the radio mode will switch from analog broadcast to HD Radio broadcast. 2. Press [Menu] > [HD Radio] on the screen. The HD radio will be off and switch to analog broadcast. , Note ↟↟ The default setting of [HD Radio] is set to on.
Phone 시작하기
Bluetooth Bluetooth Bluetooth® Wireless Technology What is Bluetooth Wireless Technology? ↟↟ Bluetooth Wireless Technology refers to a short-distance wireless networking technology which uses a 2.45GHz frequency to connect various devices within a certain distance. ↟↟ Supported within PCs, external devices, Bluetooth phones, PDAs, various electronic devices, and automotive environments, Bluetooth Wireless Technology to be transmitted at high speeds without having to use a connector cable.
Bluetooth Pairing and connecting the unit and a Bluetooth phone To use the Bluetooth feature, make sure the Bluetooth on your phone is turned on. Refer to your phone’s user guide. When no phones have been paired 1. Press [Phone] on the Home screen. Or press [W] on the steering wheel remote control. ↟↟ [Cancel]: Cancels Bluetooth connection. 2. In your phone, initiate a search for Bluetooth devices. (The default vehicle name is Kia Motors.) 3.
Bluetooth When pairing additional device 1. Press [SETUP] > [Phone connection] > [Bluetooth connections]. 2. Select the device you want to connect. If there is no device you want to connect, press [Add new]. 3. Select the service to connect, press [OK]. When connecting the Bluetooth, Hands-free connection is available only for one Bluetooth connection. But Bluetooth audio is supported for multi-connection.
Bluetooth 4. In your phone, initiate a search for Bluetooth devices. (The default vehicle name is Kia Motors.) 5. 1) If the SSP (Secure Simple Pairing) is not supported, enter the passkey on your Bluetooth device. (The default passkey is 0000.) 2) If the SSP (Secure Simple Pairing) is supported, press [Yes] on the pop-up screen of your Bluetooth device. (The pop-up screen may differ from the actual information of the Bluetooth device.) 6. Bluetooth device is connected.
Bluetooth Disconnecting the connected phone 1. Press [SETUP] > [Phone connection] > [Bluetooth connections]. 2. Select the connected phone. 3. Press [Disconnect]. , Note If you want to connect the disconnected phone again, select the disconnected phone.
Bluetooth Deleting Bluetooth Devices If you do not need to use a phone any longer, you can delete it. Note that deleting a Bluetooth device will delete all calling list and contact entries. 1. Press [SETUP] > [Phone connection] > [Bluetooth connections]. 2. Press [Delete devices]. 3. Select the desired device, then press [Delete] > [Yes]. ↟↟ [Mark all]: Marks all items. ↟↟ [Unmark all]: Unmarks all items.
Bluetooth Phone Screen Press [PHONE] on the steering wheel or [ Phone ] on the home screen. a I (Recent calls) Moves to recent calls screen. b E (Favorites) Moves to favorites Screen. c F (Contacts) Moves to contacts screen. d G (Dial screen) Moves to Bluetooth phone dial pad screen. e K (Message) Moves to message screen. , Note If you activate Privacy mode, the audio system will not display contacts, call history, favourites, and messages. Press [Menu] > [Privacy mode] to activate Privacy mode.
Making a call Making a call Making a call by entering phone number 1. In the phone screen, press [G] to display the dial pad screen. 2. Enter and enter the phone number. 3. Press [V] on the phone screen or [W] on the steering wheel remote control. , Note ↟↟ If you press the wrong number, press [M] to delete one digit of the entered number. ↟↟ Press [b] to move to Bluetooth connections settings. ↟↟ Press and hold the dial pad [0 +] to enter a "+".
Making a call Making a call by redialling Press and hold [V] on the phone screen or [W] on the steering wheel remote control. , Note Redialling is not possible when there is no number in the dialled calls list. Answering/Rejecting a call 1. If there is an incoming call, a pop-up message will appear. 2. Press [Accept] in the pop-up message or [W] on the steering wheel remote control. To reject a call, select [Reject] in the pop-up message or [ remote control.
Making a call Using the menu during a phone call When making a call, you can use the following menu items. a Turns the Mic On/Off. b Displays the Outgoing Volume settings. You can adjust the in-call volume that the other party hears.(level 1-5) cG Moves to a screen for entering ARS numbers. dP Switches a voice call from the car hands-free to the mobile phone. e Ends a call.
Making a call Switching call to the mobile phone 1. If you want to switch the call to the mobile phone while talking on the car hands-free, press [Use private] on the screen or press and hold [W] on the steering wheel remote control. As shown below, the call is switched to the mobile phone. 2. If you want to switch the call to the car hands-free while talking on the mobile phone, press [Use hands-free] on the screen or press and hold [W] on the steering wheel remote control.
Call history Call history Making a call from calling list 1. Press [I] on the phone screen or [W] on the steering wheel remote control. 2. Press [All], [Dialled], [Received] or [Missed]. ↟↟ [All]: Displays all calling list. ↟↟ [Dialled]: Displays the outgoing calling list. ↟↟ [Received]: Displays the incoming calling list. ↟↟ [Missed]: Displays the missed calling list. 3. Press the phone number you want to call. , Note The calling list may not be saved in some mobile phones.
Call history Downloading call history You can download the call history information from your mobile phone. 1. Press [I] on the phone screen. 2. Press [Menu] > [Download] > [Yes]. , Note ↟↟ Up to 50 received, dialed, and missed call history lists can be downloaded. ↟↟ The download feature may not be supported on some mobile phones. Check to see that the Bluetooth device supports the download feature.
Contacts Contacts Making a call from contacts 1. Press [F] on the phone screen. The contacts are displayed on the screen. 2. Select the contact you want to call from the list of contacts.
Contacts Downloading mobile phone contacts You can download contacts from your mobile phone. 1. Press [F] on the phone screen. 2. Press [Menu] > [Download] > [Yes]. , Note ↟↟ Upon downloading mobile phone contacts, the previous data is deleted. ↟↟ This feature may not be supported on some mobile phones. ↟↟ Up to 5000 phone contacts lists can be downloaded.
Contacts Searching by name or number You can search contacts for the name or number that you enter. 1. Press [F] > [Menu] > [Search]. 2. Enter the name or number then press [OK]. 3. Select the contact you want to call.
Favourites Favourites Calling Favourites If the phone number has already been stored in the Favourites, it can be easily called by tapping on it. First of all, add the phone number in the Favourites. 1. Press [E] on the phone screen. 2. Select the desired Favourites.
Favourites Adding as a Favourites Up to 10 contacts can be added to favourites menu. 1. Press [E] > [Add new] on the phone screen, if there is no Favourites. Or press [Menu] > [Edit], lf the phone numbers have already been stored in the Favourites 2. Select one of the contacts.
Favourites 3. Press [K] > [Close] > [;]. Deleting Favourites 1. Press [E] on the phone screen. 2. Press [Menu] > [Delete items]. 3. Select the desired item, then press [Delete] > [Yes]. ↟↟ [Mark all]: Marks all items. ↟↟ [Unmark all]: Unmarks all items.
Messages Messages Checking for new messages When you receive a message, a pop-up screen is displayed. On the text message screen, press [View] or [Close]. ↟↟ [View]: Checks the text message. ↟↟ [Close]: Closes the pop-up screen about the text message.
Messages Checking and replying to text messages 1. Press [K] on the phone screen. 2. Select contents what you want to check. ↟↟ [Call]: Making a call by redialing. , Note Some functions may not be supported due to limited Bluetooth compatibility.
Setup 시작하기
Settings Settings You can set all the settings on the system. Press [SETUP] on the head unit. ↟↟ [Navigation]: This menu describes navigation settings. ↟↟ [Phone connection]: This menu allows you to set the car connectivity of your system. ↟↟ [Advanced]: This menu is used to select a function you want to execute with the custom button. ↟↟ [General]: This menu is used to set general settings such as time or language. ↟↟ [Sound]: This menu is used to adjust the sound effects for the whole system.
Phone connection Settings Phone connection Settings Bluetooth This menu describes Bluetooth phone settings. Bluetooth connections This menu is used to pair and connect the head unit and a Bluetooth phone. Press [SETUP] > [Phone connection] > [Bluetooth] > [Bluetooth connections]. a Paired device list Displays the paired Bluetooth device list. When selecting from the list, the device is either connected or disconnected.
Phone connection Settings Message settings You can check message notification. 1. Press [SETUP] > [Phone connection] > [Bluetooth] > [Message settings]. ↟↟ [Message notification]: You can check or uncheck message notification. Bluetooth System info Vehicle name You can change the Bluetooth device name of the vehicle. 1. Press [SETUP] > [Phone connection] > [Bluetooth] > [Bluetooth system info] > [Vehicle name]. 2. Enter the desired name using the keypad, then press [OK].
Phone connection Settings Passkey You can change the passkey used for Bluetooth device authentication. 1. Press [SETUP] > [Phone connection] > [Bluetooth] > [Bluetooth system info] > [Passkey]. 2. Enter the passkey using the keypad, then press [OK]. , Note The passkey is a 4-digit authentication code used for a Bluetooth connection between the mobile phone and car system. The default passkey is set to 0000. Privacy Mode Privacy mode is used to protect private information.
Phone connection Settings Default This menu is used to reset the Bluetooth settings to factory default. Press [SETUP] > [Phone connection] > [Bluetooth] > [Default] > [Yes]. Phone projection In this menu Android Auto and Apple CarPlay can be enabled by setting a checkmark. 1. Press [SETUP] > [Phone connection]. 2. Press the desired items. ↟↟ [Android Auto]: If Android Auto is checked, you can use the functions of your Android device with a USB cable connected.
Advanced Settings Advanced Settings This menu describes advanced settings. Custom button This menu is used to select a function you want to execute with the custom button. 1. Press [SETUP] > [Advanced] > [Custom button]. 2. Select an option to assign a function to custom button. Steering wheel MODE button Selects the desired features when you press [C] on steering wheel to toggle media modes. 1. Press [SETUP] > [Advanced] > [Steering wheel MODE button]. 2.
Advanced Settings Home screen This menu is used [Edit Home Widgets] or [Edit Home icons] to select home screen widgets and set the order of menu icons. 1. Press [SETUP] > [Advanced] > [Home screen]. 2. Select the desired items. ↟↟ [Edit Home Widgets]: You can edit the Home widgets displayed on the Home screen. ↟↟ [Edit Home icons]: You can edit the Home icons displayed on the Home screen. , Note If supported widgets are 2 or less, Edit Home Widget is not supported. Split screen 1.
Advanced Settings Media change notifications 1. Press [SETUP] > [Advanced] > [Media change notifications]. 2. Press [Media notifications on top area]. ↟↟ If the box is checked, the notification pop-up for media information will be shown, whenever a content changes. Keep rear camera view 1. Press [SETUP] > [Advanced] > [Keep rear camera view]. 2. Press [Keep rear camera view]. If the box is checked, the rear camera view will be displayed regardless of gear.
General settings General settings Date/Time This menu describes date and clock settings. 1. Press [SETUP] > [General] > [Date/Time]. 2. Press the Date/Time setting. 3. Press the desired items. ↟↟ [GPS time]: Displays time according to the received GNSS time. ↟↟ [24-hour format]: Switches to 12 hour or 24 hour format. Language This menu is used to set the language of the system. 1. Press [SETUP] > [General] > [Language]. 2. Select the desired language.
General settings Screensaver This menu is used to select the screen displayed when the system power is turned off. 1. Press [SETUP] > [General] > [Screensaver]. 2. Select the desired items. ↟↟ [Digital]: The digital clock and date are displayed. ↟↟ [Analogue]: The analogue clock and date are displayed. ↟↟ [None]: Nothing is displayed. System info Version info/Update Version info You can view software version, firmware version and Device ID.
General settings Update For system’s software security, improved software or newly added function for system, you need an update. 1. Press [SETUP] > [General] > [System info] > [Version info/Update]. DL3 MQ4.png 2. After inserting the USB with the update file, press [Update]. Once updating is complete, the system will automatically restart. , Note ↟↟ This product requires regular updates for software corrections and new functions. Updating may require up to 1 hour depending on the data size.
General settings Memory You can check a memory space for voice memo. (Total storage space, used memory space, remaining memory space). Press [SETUP] > [General] > [System info] > [Memory]. , Note When the storage is full, refer to “Deleting voice memo” part. User Manual Web (QR code) This menu is used to view the Web Manual. 1. Press [SETUP] > [General] > [System info] > [User Manual Web(QR code)]. 2. Scan the QR code of your mobile device. Keep display bright and avoid glare to scan correctly.
Sound Settings Sound Settings This menu is used to adjust the sound effects for the whole system. Beep This menu is used to play a beep sound whenever you operate the touch screen. Press [Setup] > [Sound] > [Beep]. Position This menu allows you to set the sound position. For example, you can set the sound close to the driver-seat so that the volume is relatively lower in the passenger or rear seats. 1. Press [SETUP] > [Sound] > [Position]. 2. Adjust the sound position.
Sound Settings Volume levels System sound This menu allows you to set the volume level for [System sound], [Phone projection]. 1. Press [SETUP] > [Sound] > [Volume levels] > [System sound]. 2. Adjust the [Beep] / [Ringtone] / [Navigation]. 3. Press [I] / [J] to control or drag the slide bar to control volume settings. , Note Press [Reset] to reset the volume level settings.
Sound Settings Phone projection This menu allows you to set the volume level for [Android Auto], [Apple CarPlay]. 1. Press [SETUP] > [Sound] > [Volume levels] > [Phone projection]. 2. Adjust the desired option. 3. Press [I] / [J] to control or drag the slide bar to control volume settings. , Note Press [Reset] to reset the volume level settings. Equaliser This menu allows you to set the [BASS]/[MID]/[TREBLE]. 1. Press [SETUP] > [Sound] > [Equaliser]. 2. Adjust the [BASS] / [MID] / [TREBLE]. 3.
Sound Settings Volume ratio This menu is used to set the volume ratio. 1. Press [SETUP] > [Sound] > [Volume ratio]. 2. Select the desired item. ↟↟ [Proximity warning]: Lowering of audio volume when the shift lever is set to reverse. ↟↟ [Navigation during phone calls]: Playback of route guidance prompts during phone calls. ↟↟ [Volume limitation on start-up]: Limits the volume ratio automatically when starting the system.
Sound Settings Navigation volume This menu is used to set the navigation volume. 1. Press [SETUP] > [Sound] > [Navigation volume]. 2. Select the desired item. ↟↟ [Map screen volume buttons]: Navigation volume is adjusted with the volume buttons on the map screen. ↟↟ [Map screen buttons or volume buttons]: Navigation volume is adjusted with the volume buttons on the map screen or by pressing the volume buttons during prompts. Advanced (If equipped) This menu allows you to set the volume options settings.
Sound Settings Reset This menu is used to reset all sound settings. 1. Press [SETUP] > [Sound] > [Reset]. 2. Press [Yes].
Display Settings Display Settings This menu is used to adjust the illumination and set the dimming mode for the whole system. Display Off This menu is used to turn the screen off. Press [SETUP] > [Display] > [Display Off]. Dimming Sets the display brightness according to mode changes. 1. Press [SETUP] > [Display] > [Dimming]. 2. Select the desired items. ↟↟ [Auto-illumination]: Adjusts the brightness automatically according to surrounding bright ness.
Display Settings Brightness This menu is used to set the brightness. 1. Press [SETUP] > [Display] > [Brightness]. 2. Select the desired items. ↟↟ [Use illumination Control Switch]: Connection of the display to the cluster’s illumination control switch. ↟↟ [Daylight]: If you want to set [Dimming] for Daylight, set the level of display illumination for daylight mode. ↟↟ [Night]: If you want to set [Dimming] for Night, set the level of display illumination for night mode.
Display Settings Display control This menu can be set during video playback. 1. Press [SETUP] > [Display] > [Display control]. 2. Select the desired options. ↟↟ [Brightness]: Adjusts the brightness. ↟↟ [Contrast]: Adjusts the contrast. ↟↟ [Saturation]: Adjusts the saturation. , Note ↟↟ Press [Centre] to default display control settings. ↟↟ This menu is available only when in video mode.
Display Settings Ratio Sets the display ratio currently displayed video. This menu is available only when the video is being displayed. 1. Press [SETUP] > [Display] > [Ratio]. 2. Select the desired items. ↟↟ [Normal]: Original source display ratio. ↟↟ [Full screen]: Full screen display. , Note This menu is available only when in video mode. Reset Resets the display settings to factory default. 1. Press [SETUP] > [Display] > [Reset]. 2. Press [Yes].
시작하기(Hybrid Hybrid Vehicles Only)
Hybrid Hybrid Hybrid information The hybrid vehicle flexibly uses power from the electric system and power from the engine according to the efficient driving conditions. Starting hybrid mode Press [Hybrid] on the Home screen.
Hybrid Menu screen for hybrid mode The Hybrid menu consists of two sections: [Fuel economy], [Energy flow]. 1 2 a [Fuel economy]: Displays fuel economy information according to the vehicle’s driving. b [Energy flow]: Displays the status of the power delivery for each component according to the vehicle’s driving. Fuel economy This displays fuel economy information according to vehicle’s driving. Press [Hybrid] > [Fuel economy]. 1 2 3 a [Fuel economy graph]: Displays fuel economy information.
Hybrid Energy flow This displays the status of the power delivery for each component according to the vehicle’s driving. Press [Hybrid] > [Energy flow]. 1 2 a Displays the driving state of the hybrid vehicle. b Displays the flow of power transfer between the components. Driving status of hybrid vehicle Idle mode The vehicle is in the Idle mode with no delivery of power.
Hybrid Hybrid mode The engine’s power and the motor’s power are both used for driving the vehicle. Engine mode The engine’s power is used for driving the vehicle. Charging in engine mode The engine’s power is used for driving the vehicle and the battery is charged at the same time.
Hybrid Battery charging 1 While the vehicle is in the Idle mode, the engine’s power is used for charging the battery. Battery charging 2 The deceleration energy from braking is used for charging the battery. Engine brake The engine’s power is used for slowing down the vehicle.
Hybrid Electric mode The battery power is used for driving the motor, which drives the vehicle. The engine’s power is not used. Charging in electric mode The engine’s power is used for charging the battery, and the electric motor power is used for driving the vehicle at the same time. Battery charging 3 Both the engine’s power and the deceleration energy from braking are used for charging the battery.
Hybrid Charging when engine braking The engine’s power is used for slowing down the vehicle, and the deceleration energy is used for charging the battery at the same time.
Others 시작하기
Phone Projection Phone Projection What is Android Auto/Apple CarPlay? Securely access your smartphone while driving. Various functions of your smartphone are displayed on and operable from the screen of the media device (e.g. navigation, making a call, listening to music etc.). When connected, an Android Auto/Apple CarPlay icon appears on the screen. Available functions and operations may differ depending on the company model. For more information, visit the Google or Apple website.
Phone Projection [Android Auto] -- Intermittent black screens appear when entering Android Auto. -- Differentiation of phones that support Android Auto and those which do not, may not be possible. -- Black screens appear in some areas of the screen due to app errors. [Apple CarPlay] -- Intermittent black screens appear when entering Apple CarPlay. -- Black screens appear in some areas of the screen due to app errors when navigating between screens in Apple CarPlay.
Phone Projection NOTICE-Apple CarPlay ↟↟ Bluetooth phone/media features will be disabled when Apple CarPlay is activated. After removing the USB cable, these features will be available again. ↟↟ If Apple CarPlay is not activated even after a successful connection, follow these steps: -- Check whether Apple CarPlay is disabled in the iPhones application settings. -- Check whether Apple CarPlay is activated in the [Phone projection] menu.
Using Rear Came (If Equipped) Using Rear Came (If Equipped) About Rear Camera ↟↟ Rear camera is a feature for the customers who select option. ↟↟ The rear camera provides a view of the rear of the vehicle, when reversing. ↟↟ When the shift lever is placed in R with the vehicle’s ignition turned on, rear camera will oper ate. ↟↟ If you change the shift lever location from R to another position than P, the rear camera stay turned on.
Using Rear Came (If Equipped) About DRV (Driving Rear View) This function allows you to view the rear of the vehicle while driving through the rear camera mounted on the vehicle. Operating DRV After turning on the engine, put the lever of the transmission in the N or D position and press [Camera switch] to start DRV. , Note If you drive at about 10 km/h or more during DRV operation, DRV is turned off. At this state, even if you drive at less than about 10 km/h, DRV is remained at OFF state.
Using Rear Came (If Equipped) About Trailer View Mode (If equipped) It shows you the view from each other camera. ↟↟ To switch the view to the other camera's, touch the camera view area on the screen and press [ ] when it is displayed. It is switched to the view from the other camera. ↟↟ If there is no control for a while, [ ] disappears from the screen automatically.
Reference 시작하기
Precautions for Safety Precautions for Safety CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Precautions for Safety To reduce the risk of electric shock, do not remove the cover or back of this product. There are no user-serviceable parts inside. Refer servicing to qualified service personnel. To reduce the risk of fire or electric shock, do not expose this product to dripping or splash ing water, rain, or moisture. When driving your vehicle, be sure to keep the volume of the unit low enough to allow you to hear sounds coming from the outside. Do not drop it and avoid heavy impacts at anytime.
Precautions for Safety WARNING: ↟↟ Don’t use a mobile phone when you are driving. You must stop at a safe place to use a mobile phone. ↟↟ Do not disassemble, assemble, or modify the AV system. Such acts could result in accidents, fire, or electric shock. ↟↟ Using phone features while driving may distract drivers from paying attention to traffic conditions and result in traffic accidents. Use phone features only after the vehicle has been parked.
General Information General Information About USB ↟↟ Take precautions regarding static electricity when connecting/disconnecting external USB devices. ↟↟ Encoded MP3 Players will not be recognised when connected as an external device. ↟↟ When connecting an external USB device, the device may not properly recognise the USB in some states. ↟↟ USB devices formatted as FAT16/32, exFAT or NTFS are supported. ↟↟ Some USB devices may not be supported due to compatibility issues.
General Information Music file Information ↟↟ Sampling frequency: 8 ~ 48 KHz (MP3), 22.5 ~ 48 KHz (WMA), 8 ~ 48 KHz (FLAC), 8 ~ 48 KHz (OGG), 8 ~ 48 KHz (WAV) ↟↟ Bit rate: 8 ~ 320 Kbps (MP3), 20 ~ 128 Kbps (WMA), 8 Kbps ~ 4 Mbps (FLAC), 8 ~ 500 Kbps (OGG), 8ibt/16bit (WAV) ↟↟ WMA version: v2, v7, v8, v9 ↟↟ PCM version: LPCM (A-law/u-law) ↟↟ MP3 version: MPEG 2/2.5 Layer 3 ↟↟ Playable file format: “.mp3”/ “.wma”/ “.flac”, “.ogg“, “.
Before thinking there is a product defect Before thinking there is a product defect 1. Errors which occur during the operation or installation of the device may be mistaken as a malfunction of the actual device. 2. If you are having problems with the device, try the suggestions listed below. 3. If the problems persist, contact your authorised Kia dealer. Problem: There are small red, blue, or green dots on the screen.
Troubleshooting Troubleshooting Problem: The power does not turn on. ↟↟ Possible Cause: The fuse is disconnected. ↟↟ Countermeasure: -- Replace with a suitable fuse. -- If the fuse is disconnected again, please contact your dealer. ↟↟ Possible Cause : Device is not properly connected. ↟↟ Countermeasure: Check to see that the device has been properly connected. Problem: The system does not play. ↟↟ Possible Cause: The vehicle battery is low.
Troubleshooting ↟↟ Possible Cause: A USB extension cable is being used. ↟↟ Countermeasure: Directly connect the USB memory with the media terminal on the vehicle. ↟↟ Possible Cause: A USB which is not a Metal Cover Type USB Memory is being used. ↟↟ Countermeasure: Use standard USB Memory. ↟↟ Possible Cause: An HDD type, CF, SD Memory is being used. ↟↟ Countermeasure: Use standard USB Memory. ↟↟ Possible Cause: There are no music files which can be played.
