User's Manual

ManualsBrandsMOTOTECH ManualsElectronicsTransmitter Assy - Folding Key





C210









DEPARTMENT:

R&D CENTER

STANDARD SPECIFICATION

PART NUMBER :

MT-C210-0107

TITLE : TRANSMITTER ASSY – Standard Specification

-- TABLE OF CONTENTS --

1. APPLICATION

1.1 SUMMARY

2. ELECTRCAL PERFORMANCE

2.1 GENERAL ELECTRICAL PERFORMANCE OF TRANSMITTER ASS' Y

2.2 WIRELESS CHARACTERISTIC

2.3.1 DOMESTIC (DOM)

2.3.2 GENERAL EXPORT(EXP)

3. FUNCTION

3.1 STRUCTURE OF DATA ( "1", "0" )

3.2 TRANSMITTER PROTOCOL FORMAT

3.3 BUILDING THE TRANSMITTED CODE WORD (ENCODER)

3.4 BASIC OPERATION OF RECEIVER (DECODER)

3.5 SYNCHRONIZATION WINDOW

3.6 LED FLICKERING PROCEDURE

3.7 RADIO FREQUENCY TRANSMISSION PROCEDURE

3.8 REMOCON FUNCTION OF EACH SIGNAL

3.9 POWER ON INITIALIZATION

4. OPERATING

4.1 REMOTE DOOR LOCK

4.2 REMOTE DOOR UNLOCK

4.3 PANIC FUNCTION

4.4 ESCORT FUNCTION(DOM ONLY)

4.5 ID CODE

4.6 REMOCON RESPONSE OF OPERATING CONTINUOUS SWITCH

5. REVISION LIST

5.1 REVISION SP01 (2013-01-07)

1 REV.SP01 ORIGINAL RELEASE 1 ~ 11 13.01.07 KIM.H.J

MARK

EO NUMBER CHANGING LIST PAGE CHAGING DATE WRITER

REVISION DATE

2013.01.07

REFERENCE DATA

DIVISION

WRITER

REVIEWER APPROVER

POSITION

ORIGINAL DATA

MANAGEMENT DEPARTMENT

APPROVAL

Summary of content (11 pages)

PAGE 1
Vehicle Name: C210 DEPARTMENT: R&D CENTER TITLE : SSANGYONG MOTOR COMPANY STANDARD SPECIFICATION PAGE : STANDARD SPECIFICATION PART NUMBER : MT-C210-0107 1 / 11 TRANSMITTER ASSY – Standard Specification -- TABLE OF CONTENTS -1. APPLICATION 1.1 SUMMARY 2. ELECTRCAL PERFORMANCE 2.1 GENERAL ELECTRICAL PERFORMANCE OF TRANSMITTER ASS' Y 2.2 WIRELESS CHARACTERISTIC 2.3.1 DOMESTIC (DOM) 2.3.2 GENERAL EXPORT(EXP) 3. FUNCTION 3.1 STRUCTURE OF DATA ( "1", "0" ) 3.2 TRANSMITTER PROTOCOL FORMAT 3.
PAGE 2
SSANGYONG MOTOR COMPANY STANDARD SPECIFICATION SPEC NO: ES- PAGE: 2 / 11 (SHT/SHTS) 1. APPLICATION THIS SPEC APPLIES TO C210 IMMO & BCM Transmitter ASS’Y. BUT, IF CONTENT WHAT IS DIFFERENT THIS SPEC EXIST, CONTENTS OF DRAWING SHEET IS FIRST OF ALL 1.
PAGE 3
SSANGYONG MOTOR COMPANY STANDARD SPECIFICATION SPEC NO: ES- 페이지: 3 / 11 (SHT/SHTS) 2. ELECTRICAL PERFORMANCE 2.1 GENERAL ELECTRICAL PERFORMANCE OF TRANSMITTER ASS' Y LIST REQUIREMENTS RATED VOLTAGE DC 3.0V OPERATING VOLTAGE RANGE OPERATING TEMPERATURE RANGE STORED TEMPERATURE RANGE INSULATION RESISTANCE USING DATE DARK CURRENT NOTE DC 2.7V ～ DC 3.
PAGE 4
SSANGYONG MOTOR COMPANY STANDARD SPECIFICATION SPEC NO: ES- 3. FUNCTION 3.1 STRUCTURE OF DATA (“1", "0”) 3.2 TRANSMITTER PROTOCOL FORMAT (1) 송신부의 1회 DATA 전송횟수는 10FRAME으로 구성된다. (1) ONE TIME TRANSMITTING DATA CONSIST OF 10 FRAMES (2) 각 FRAME간 전송 간격은 6.8 ± 1ms로 한다. (2) EACH FRAME DATA THANSMISSION INTERVAL IS 6.8 ± 1ms (3) 모든 0과 1의 BIT 형태는 PULSE 형태로 구별한다. (3) ALL OF BIT (0 AND 1) DIFFERENTIATE THE PULSE FORM (4) CODE WORD TRANSMISSION SEQUENCE (73.
PAGE 5
SSANGYONG MOTOR COMPANY STANDARD SPECIFICATION SPEC NO: ES- 페이지: 5 / 11 (SHT/SHTS) (6) CODE WORD TRANSMISSION DATA FORMAT (7) RF Data Format (756msec) ① Preamble: 16BIT CONSIST OF “0” ② Header: CONSIST OF Low Level FOR 4TE(Timing Element) ③ Start Bit: 1Bit CONSIST OF “1” ④ Encrypted Portion: CONSIST OF 32Bit (TABLE 3-1) ⑤ Fixed Code Portion: CONSIST OF 32Bit (TABEL 3-2) Bit Address 0 ～ 15 16 ～ 17 18 ～ 19 20 ～ 21 22 23 24 ～ 27 28 ～ 31 TABLE 3-1 Encrypted Portion Information Description Values Sy
PAGE 6
SSANGYONG MOTOR COMPANY STANDARD SPECIFICATION Bit Address 32 ～ 55 SPEC NO: ES- 페이지: 6 / 11 (SHT/SHTS) TABLE 3-2 Fixed Portion Information Field Description ID0 ~ ID23 Serial Number 56 ～ 59 0 0 1 0 60 ～ 63 S3, 0 0 0 0 S3, S0, S1, S2 Button Status 3.3 BUILDING THE TRANSMITTED CODE WORD (ENCODER) 3.4 BASIC OPERATION OF RECEIVER (DECODER) 3.
PAGE 7
SSANGYONG MOTOR COMPANY STANDARD SPECIFICATION SPEC NO: ES- 3.6 LED FLICKERING PROCEDURE LED FLICKERING PERFORM ON/OFF PROCEDURE TABLE 3-3 LED TURNED THE LIGHT ON TIME BY EACH FUNCTION 3.7 RADIO FREQUENCY TRANSMISSION PROCEDURE TABLE 3-4 TX TRANSMISSION FLOW CHART START 스위치 분석 NO(NOISE ...) 스위치 입력 OK YES TX POWER = 1(ON) LED = ON TX DATA 출력(2.
PAGE 8
SSANGYONG MOTOR COMPANY STANDARD SPECIFICATION SPEC NO: ES- 페이지: 8 / 11 (SHT/SHTS) 3.
PAGE 9
SSANGYONG MOTOR COMPANY STANDARD SPECIFICATION SPEC NO: ES- 페이지: 9 / 11 (SHT/SHTS) 4. OPERATING 4.1 REMOTE DOOR LOCK WHEN SWITCH OF TRANSMITTER PRESSE UNDER 0.5s, IT PERFORM VEHICLE’S DOOR LOCK FUNCTION (1) AFTER SWITCH PRESSING (PRESSING TIME = 0.1 ~ 0.5s), IMMEDIATELY TRANSMITTER IS POWER ON AND TRANSMIT DATA (2) DURING MICOM TRANSMIT DATA, IF BUTTON INPUT ENTER, MICOM IGNORE THAT SIGNAL AND IT PERFORM EXISTING OPERATING (3) IF SWITCH PRESSING TIME IS UNDER 0.
PAGE 10
SSANGYONG MOTOR COMPANY STANDARD SPECIFICATION SPEC NO: ES- 페이지: 10 / 11 (SHT/SHTS) 4.4 ESCORT FUNCTION (DOM ONLY) WHEN SWITCH OF TRANSMITTER PRESSE OVER 0.5s, IT PERFORM VEHICLE’S ESCORT FUNCTION (1) IF SWITCH IS PRESSED LONGER THAN 0.5s, WHEN THE TIME BECOME 1s, TRANSMITTER IS POWER ON AND TRANSMIT DATA (2) DURING MICOM TRANSMIT DATA, IF BUTTON INPUT ENTER, MICOM IGNORE THAT SIGNAL AND IT PERFORMS EXISTING OPERATING.
PAGE 11
SSANGYONG MOTOR COMPANY STANDARD SPECIFICATION SPEC NO: ES- 5. REVISION LIST 5.1 REVISION SP01 (2008-09-01) (1) LIST : 3-2의 6) CODE WORD TRANSMISSION (2) NOT USED RANGE OF Fixed Code Portion : 0001 => 0010 5.