MOTOTECH CO., LTD. 1 MT BCMDE 02 PRODUCT SPECIFICATION AND MANUAL Title Project Name Certification Request Document KORANDO C Drawn 2012-03-08 Released 2012-03-08 Made by B.S.
MOTOTECH CO., LTD. 2 Table of Contents 1. CONTENTS ............................................................................................................ 3 2. ELECTRONIC SPEC.............................................................................................. 3 3. SPECIFICATION .................................................................................................... 4 4. CIRCUIT EXPLAINATION ......................................................................................
MOTOTECH CO., LTD. 3 1. Contents Type Name Use Weak Signal Equip. Unit Assy - Body Control Utilizing the frequency of 134.2kHz RFID vehicle anti-theft device 1. This Equip is designed to prevent car theft. 2. This Equip & Transponder communicate encryption algorithm mutually for Summary User Authentication. 3. This equipment uses semiconductors and integrated circuits that are designed to have a high reliability. 4. Main Power use Regulator VCC of BCM. Composition 1. LF Base Station 2.
MOTOTECH CO., LTD. 4 3. SPECIFICATION Name Type Equipment List Frequency Antenna Type Oscillation Method Local clock frequency Modulation Method Communication Scheme Equipment use Operating Voltage Operating Temp. Weight Dimension Unit Assy - Body Control Weak Signal Equip. LF Transmitter-Receiver 134.2 kHz Type : BOBBIN COIL ANTENNA Crystal oscillation 4 MHz FSK Two-Way Communication Vehicle Antitheft Equip. DC 13.5V (TMS3705 DC 5.
MOTOTECH CO., LTD. 5 FCC (Federal Communications Commission) WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. This device complies with Part 15 of the FCC`s Rules. Operation is subject to the following two Conditions: 1.