MOTOTECH CO., LTD. PRODUCT SPECIFICATION AND MANUAL 2016.08 BUYER / PROJECT SYMC / Y400 BUYER MODEL Unit Ass’y Body control COMPANY Mototech Co,. MAKER/NATION Mototech Co,./Republic of Korea DRAFT PART Research Center DRAFTER H.S.Park Title Project Name Y400 Certification Request Document Drawn 2016-08-09 Released 2016-08-09 Made by H.S.
MOTOTECH CO., LTD. Table of Contents 1. CONTENTS ............................................................................................................ 3 2. ELECTRONIC SPEC.............................................................................................. 3 3. SPECIFICATION .................................................................................................... 4 4. CIRCUIT EXPLAINATION ......................................................................................
MOTOTECH CO., LTD. 1. Contents Type Weak Signal Equip. Name Unit Ass’y Body Control Use Utilizing the frequency of 134.2kHz RFID vehicle anti-theft device 1. This Equip is designed to prevent car theft. 2. This Equip & Transponder communicate encryption algorithm mutually for User Authentication. Summary 3. This equipment uses semiconductors and integrated circuits that are designed to have a high reliability. 4. Main Power use Regulator VCC of BCM. Composition 1. LF Base Station 2.
MOTOTECH CO., LTD. 3. SPECIFICATION Type Unit Ass’y Body Control Name Weak Signal Equip. MODEL NAME MT BCM 04 Equipment List LF Transmitter-Receiver Frequency Antenna Type Oscillation Method Local clock frequency Modulation Method Communication Scheme Equipment use Operating Voltage. Operating Temp. Weight Dimension 134.200KHz Type : BOBBIN COIL ANTENNA Crystal oscillation 4MHz FSK Two-Way Communication Vehicle Antitheft Equip. DC 12V (TMS3705 DC 5.
MOTOTECH CO., LTD. demodulation. U1 verify data from U10, and then the results are sent back to EMS. FCC (Federal Communications Commission) WARNING: This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.
