en LOOP LOOP Read me first
Your wireless earbuds Status Light Volume + Power, Calls & Music Control Volume en _ Your wireless earbuds 1
Step 1: Charge up & power on Note: Before use, charge until the status light turns blue. Charge up. (Wall charger not included.) Power on.
Step 2: Pair with BluetoothTM 1 2 Turn on Bluetooth on your device. Turn on your wireless earbuds. 3 On your device, go to the Bluetooth menu to pair & connect. Enter 0000 if prompted. 4 When the device and earbuds connect, you’ll hear a tone. en Light blinks blue. Light blinks blue slowly.
Calls & Music Control Press the buttons on the control box to control calls, voice commands and music. Note: Voice control may not work on some devices or in all languages. Volume up + Music Play/Pause Answer/End Calls Or double press to play the next track Or triple press to restart a track or play the last track. Volume down _ Note: Some features are phone/ network dependent.
Music play/pause press volume down/up press next/previous track double press or triple press change EQ setting press and at the same time during music playback or Calls answer/end call/ receive call in call waiting mode and music mode press mute during call press and hold and reject a call press and hold or Voice to issue a voice command en press and hold or during idle or music playback mode, then say the command Calls & Music Control 5
Advanced Status Lights Pairing mode blue indicator blinks twice repeatedly Connected blue indicator blinks twice periodically Low battery red indicator blinks slowly Charging steady red Full charge steady blue Power off blue indicator comes on for 1 sec 6 Advanced en
Charge Level Check Press and hold + and – together in idle mode Note: Your battery is designed to last the life of the product. It should only be removed by a recycling facility. Any attempt to remove or replace your battery may damage the product and void your warranty.
Reset Turn off Bluetooth for all connected devices. Turn off the wireless earbuds, then press and hold and both volume buttons until the status light shows alternating red and blue for five times. You’ll hear a tone.
Hubble ConnectTM for VerveLifeTM Hubble Connect for VerveLife can greatly enhance your earbud experience. Download app for free at the App Store® or Google PlayTM (AndroidTM 4.3 or higher) • Locate a lost earbud: Locate on a map the last time your earbud was connected to your device. • Voice Prompts (Android only): Choose either English voice prompt or tone.
Use this product responsibly VerveLoop is designed to give the user great sounding wireless earbuds. However the product should be used responsibly. Safety instructions for use To avoid hearing damage, keep the volume at a moderate level. Avoid listening to music at loud volume levels for prolonged periods of time as this may cause permanent hearing damage or hearing loss. Your hearing is delicate and highly sensitive so please listen to your music responsibly.
Help & more • Get help: Visit www.motorolahome.com/support • Find accessories at: www.motorolahome.com or www.verve.life Note: If you’re watching video while using your earbuds, your audio may be slightly out of sync with your video. Manufactured, distributed, or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license.
www.motorolahome.com www.verve.
