PIP1200 2.
Welcome... to your new Motorola Digital Video Baby Monitor! Thank you for purchasing the video baby monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 3 2 1 9 4 5 10 6 7 8 1. Screen display 2. Dual sound level indications (front and top view) 3. Power button Press and hold to turn on or off. Press to turn the screen on or off. 4. Menu button Press to open the menu. 5. OK / Zoom button Press to confirm a selection/zoom in or out. 6. Navigation button Adjust menu settings/press left or right to select the parent unit's volume level. 7. Volume / Back button 8. Talk back button Press and hold to talk to the baby. 9.
Parent Unit menu icons Adjust LCD brightness Set the alarm Temperature unit °C or °F selection and high/low detection Screen on/off timer Play lullaby + Add camera x Delete camera View multiple cameras (not applicable for single camera) Parent Unit status icons Signal strength Battery level indication Zoom in Alarm set Playing lullaby Speaker off Talk back Night vision Cycle view from camera Camera selected
Overview of Your Baby Unit 1 3 6 7 4 5 2 1. Camera 2. Base 3. Speaker 4. Antenna 5. Power jack 6. Power / Linking LED indicator Lights up in blue when the parent unit is powered on and linked to the baby (camera) unit. 7. Pair button Press and hold to pair with the parent unit.
Table of contents 1. Safety Instructions ................................................................................................ 7 2. 5. Getting Started....................................................................................................... 10 Baby Unit Power Supply......................................................................... 10 2.1 Parent Unit Battery Installation ........................................................... 11 2.2 Parent Unit Power Supply ............
1. Safety Instructions WARNING: STRANGULATION HAZARD - Keep the unit and adaptor cord more than 3 feet from the crib and out of the baby's reach. NEVER place Baby Unit or cords within the crib. Secure the cords more than 3 feet away from the baby's reach. Never use extension cords with AC Adaptors. Only use the AC Adaptors provided.
BABY UNIT SET UP & USE: • Determine a location for the Baby Unit that will provide the best view of your baby in his/her crib. • Place the Baby Unit on a flat surface, such as a dresser, bureau, or shelf. • NEVER place the Baby Unit or cords within the crib. WARNING This Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use.
• Only insert a battery pack of the same type. • Do not touch the plug contacts with sharp or metal objects. • Connect the power adapters to easily accessible electrical outlets. CAUTION Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to their instructions. Use only the rechargeable battery pack with rating: 3.
2. Getting Started 2.1 1. Connecting the Power Supply for the Baby Unit Plug the DC plug of the power adapter into the power socket on the rear of the baby (camera) unit and plug the other end of the AC adapter into the wall socket. 2. The baby unit turns on and the power indicator lights up in blue. WARNING Strangulation Hazard. Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1 meter or 3 feet away). Do not remove the tags from the AC Adapters.
2. Switch on the AC power and the parent unit will turn on. 3. When the parent unit is fully charged, screen display. will appear steadily on the 4. Press and hold the power button on the top of the parent unit to turn it on and off. Note Use only the supplied power adapter (DC5V / 1000 mA). Pair the baby (camera) unit to the parent unit We have paired the baby unit to the parent unit in the pack.
1. Mark the positions of 2 screw holes on the wall. Drill a screw hole at each marking. 2. Install the supplied wall anchors into 2 screw holes on the wall. 3. Insert the supplied wall mounting screws into the wall anchors. 4. Fix and fasten the underside of the baby (camera) unit and the wall mount bracket with the supplied separate screw. 5. Hang the wall mount bracket on the wall mounting screws on the wall. 6. Adjust the camera manually if necessary.
3. Using the Baby Monitor Please read these instructions carefully, and be aware that this baby monitor is only intended as an aid. It is not a substitute for responsible adult supervision. 3.1 Setting Up • Make sure that the Baby Unit and Parent Unit are both switched on. • Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor.
3.4 Night Vision Mode The Baby Unit has 6 high-intensity infrared LEDs for picking up clear images in the dark. When the built-in photo sensor on the front of the unit detects a low level of ambient light, the LEDs will automatically activate and the screen on the icon will be displayed at the Parent Unit will display in black and white. The top of the screen. 3.5 Turn off Parent Unit LCD Screen You can turn off the Parent Unit screen without switching off the Parent Unit.
4. Parent Unit Menu Options 4.1 Adjust Speaker Volume You can adjust the speaker volume from Volume 1 to Volume 5, or turn it off. Press + or - on the Parent Unit when it is in camera viewing mode. When the speaker volume is set to off, the screen displays . 4.2 LCD Brightness You can adjust the brightness of the Parent Unit screen from Level 1 to Level 5. 1. Press M when the Parent Unit is in camera viewing mode to show the menu options with displayed in red. 2. Press O, then 3.
4.3.1 Set lullaby You can play calming sounds on the Baby Unit to comfort your baby. 1. 2. 3. 4. Press M when the Parent Unit is in camera viewing mode. to scroll to . Press < or Press O, then or to choose your desired lullaby. Press O to confirm your selection. 4.4 Monitor the Temperature Your Baby Unit measures the surrounding temperature. If the detected temperature goes outside a selected temperature range, you can set the Parent Unit to emit an alert tone and show a warning message on the screen.
4.4.3 Temperature Alert You can set whether to receive a visual and audible alert when the room temperature goes outside the selected temperature range. 1. 2. 3. 4. 5. 4.5 1. 2. 3. 4. 5. Press M when the Parent Unit is in camera viewing mode. to scroll to . Press < or Press O, then or to scroll to and press the O button. Press or to choose On or Off. Press O to confirm your selection. Remove a Baby Unit from the Parent Unit Press M when the Parent Unit is in camera viewing mode.
4.8 Pair and Replace a Baby Unit The Baby Units and Parent Unit provided are already paired. You can add or replace a Baby Unit in your video and audio monitoring system. You can pair a maximum of four Baby Units to your Parent Unit. Each new Baby Unit must be paired to the Parent Unit before use. To pair and replace a Baby Unit: 1. 2. 3. 4. Press M when the Parent Unit is in camera viewing mode. to scroll to . Press < or Press O, then or to choose a desired Baby Unit number, then press O.
6. Help No display • Try recharging the battery pack. • Reset the parent and baby (camera) units. Unplug both the units' from the wall socket, then plug them back in. • Check if the parent/baby (camera) unit is switched on. • Press and hold the power button on the parent unit to switch it on. • Make sure the correct camera is selected. Change the camera number if necessary. • Make sure the display of the parent unit is turned on.
Noise interference on your device • To avoid background noise or echoes, ensure there is enough distance between your device and the camera (baby unit). • Use of other 2.4 GHz products, such as wireless networks (Wi-Fi® routers), Bluetooth™ systems, or microwave ovens, may cause interference with this product. Keep the parent and baby (camera) units at least 5 feet away from these types of products, or switch them off if they appear to be causing interference.
7. General information Cleaning and care Important Always switch off and disconnect the power adaptor before cleaning your video baby monitor. • Clean your video baby monitor with a slightly damp cloth or with an antistatic cloth. Never use cleaning agents or abrasive solvents. • Do not clean any part of the video baby monitor with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty.
Who is covered? This warranty extends only to the first consumer purchaser, and is not transferable. What will MZGW do? MZGW or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this limited warranty. We may use functionally equivalent reconditioned / refurbished / pre-owned or new Products, Accessories or parts.
Exclusions Normal Wear and Tear. Periodic maintenance, repair and replacement of parts due to normal wear and tear are excluded from coverage. Batteries. Only batteries whose fully charged capacity falls below 80% of their rated capacity and batteries that leak are covered by this limited warranty. Abuse & Misuse. Defects or damage that result from: (a) improper operation, storage, misuse or abuse, accident or neglect, such as physical damage (cracks, scratches, etc.
FCC and IC regulations FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Radiation Exposure Statement: The baby unit complies with FCC/ISED radiation exposure limits set forth for an uncontrolled environment. The baby unit should be installed and operated with minimum distance 20cm between the radiator& your body. The parent unit has been tested and comply with FCC and ISED SAR limits. Déclaration d'exposition aux radiations: L'unité bébé est conforme aux limites d'exposition aux rayonnements FCC / ISED établies pour un environnement non contrôlé.
8. Technical Specifications RF frequency bands Parent unit display Temperature Operating range Baby unit image sensor Power adaptor for the baby unit and the parent unit Parent unit battery information Battery life 2405 MHz to 2475MHz 2.8” diagonal TFT LCD 0°C ~ 40°C or 32°F ~ 104°F Color CMOS 0.3M Pixels Input: 100-240V AC, 50/60Hz, 200mA or 300mA; Output: 5.0V DC, 1000mA Lenovo Corporation (BL253) 3.
EU Declaration of Conformity (DoC) Hereby, Meizhou Guo Wei Electronics Co. LTD declares that the product is in compliance with RE Directive 2014/53/EU. The full text of the EU declaration of conformity is available on the website: motorolanursery.com Manufactured, distributed or sold by Meizhou Guo Wei Electronics Co. LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license.
