Use Instructions

订 单 编 号
工 厂 型 号
版 本
mm(1:1) 2019-04-17
单 位
客 户
客 户 品 牌
客 户 型 号
日 期工 程 设 计
业 务 审 核
US版通用品 说明书
65*80MM;80G书纸;单色双面印刷 15P 骑马钉装钉
77-007-01530
Binatone
Boom2/Boom2+/Boom2+车充版
H715M/H715M+/H715M+车充版
Motorola
®
1.0
工 程 审 核 批 准
物 料 名 称
规 格 / 材 质
描 述
物 料 编 码
EN
MOTOROLA BOOM2
MOTOROLA BOOM2+
1
EN
AT A GLANCE
the important bits, quick and easy
Volume Up
Button
Charge
(Micro USB)
Call Button
Press to
answer/
end call.
Boom
open - on
Microphone
Volume Down Button
Charging Status Light:
Blue – Fully charged
Red – charging
EN
2
Wear
Ear Hook
Earpiece
3
EN
CHARGE IT
let’s get you up and running
To charge your headset, plug the USB cable into the
headset's micro USB port and connect to USB power
source.
Note: Fully charge the headset before you use it.
Tip:
you’re not using it.
Caution: Your battery is designed to last the life of your
device. It should only be removed by a recycling
facility. Any attempt to remove or replace your battery
will damage the device, void your warranty, and could
cause injury.
CONNECT & GO
let’s get you connected
EN
4
EASYPAIR
TM
METHOD
Turn on Bluetooth on your device.
Turn on your headset and follow the voice
prompts.
Go to the Bluetooth menu on your device
to pair & connect with the headset.
When the device and headset connect,
you’ll hear “pairing complete”.
5
EN
COMFORT
what feels best on you
EAR HOOK
On-Ear
Right Ear Left Ear
right or left use
Wear
EAR TIP (NO HOOK)
Wear
Attach ear tip
EN
6
7
EN
BASICS
standard features, advanced quality
CALLS
To…
answer a call
reject a call
call
redial last call
mute or unmute a
call
Press the Call button.
Press and hold the Volume Up or
Volume Down button until you
hear a tone.
Press the Call button to activate
voice recognition.
(phone dependent)
Press and hold the Call button 2
seconds until you hear a tone.
Press and hold the Volume Up
and Volume Down buttons
together until you hear “mute
on” or “
”.
To…
end a call
change call volume
answer a second
incoming call
reject a second call
Press the Call button
Press the Volume Up or Volume
volume, press and hold the
Volume Up or Volume Down
button.
Press the Call button.
Press and hold the Volume Up or
Volume Down button until you
hear a tone.
EN
8
Notes:
•
• Using a mobile device or accessory while driving
may cause distraction and may be illegal. Always
obey the laws and drive safely.
9
EN
STATUS LIGHT
If light shows…
three blue flashes
three red flashes
rapid blue/red
flashes
rapid blue/purple
flashes
short blue flash
your headset is…
power on
power o
pairing mode
connection successfully
incoming/outgoing call on
phone 1
If light shows…
slow blue pulse
slow blue flash
slow red flash
short blue/red flash
short red flash
your headset is…
on a call
on standby
on a call (call muted)
attempting to connect
low battery
Note:
1 Headset will automatically turns o if no connection
with phone after 5 minutes.
2 After paired to the mobile phone, headset will enter
sleep mode when boom is closed (headset switches o)
and bluetooth of phone stays on. If a call is come, you can
pick it up by simply opening the boom (switch on the
headset). It will automatically connect and pick call.
3 Closing the Boom saves battery life.
EN
10
11
EN
ADVANCED
SECOND DEVICE
Do you use two phones? Or maybe a phone and a
tablet? Connect with both of them.
1
“CONNECT & GO” on page 4).
2
®
3 Now pair the second device with your headset as
normal.
4 Once paired, to connect with both devices simply turn
them on. You’ll hear “phone connected” as each device
connects with your headset.
Note:
end call, just use the feature as normal and follow the
voice prompts.
EN
12
CALLER ID
“call from <number>” on an incoming call.
Note:
BATTERY READOUT
When you’re not in a call, press the Volume Up and
Volume Down buttons together in standby mode to
Tip:
you’re not using it.
EN
Hubble Connect
TM
for Motorola
Hubble Connect for Motorola can greatly enhance
your earbud experience. Download app for free at the
App Store
®
or Google Play
TM
(Android
TM
4.3 or higher).
• Locate a lost earbud: Locate on a map the last time
your earbud was connected to your device.
Safety instructions for use
moderate level. Avoid listening to music at loud
volume levels for prolonged periods of time as this
may cause permanent hearing damage or hearing loss.
Your hearing is delicate and highly sensitive so please
listen to your music responsibly. For more information
visit the Deafness Research Foundation www.drf.org
Don't use Boom when it is unsafe to do so. For
example, while operating a vehicle, cycling, crossing a
road, or any activity which requires your attention and
ability to hear.
You should be aware of your surroundings and use
Boom responsibly.
13
Help & more
Manufactured, distributed, or sold by Binatone Electronics
property of their respective owners. © 2016 Motorola Mobility LLC. All
rights reserved.
• Get help: Visit www.motorolahome.com/support
• Find accessories at: www.motorolahome.com
Note: If you’re watching video while using your
earbuds, your audio may be slightly out of sync with
your video.
This device contains licence-exempt transmitter(s)/receiv-
er(s) that comply withInnovation, Science and Economic
DevelopmentCanada’s licence-exempt RSS(s). Operation
is subject to the following two conditions:
(1)This device may not cause interference.
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device.
L’émetteur/récepteur exempt de licence contenu dans le
présent appareil est conforme aux CNR d’Innovation,
Sciences et Développement économique Canada
applicables aux appareils radio exempts de licence.
L’exploitation est autorisée aux deux conditions suivantes :
(1) L’appareil ne doit pas produire de brouillage;
(2) L’appareil doit accepter tout brouillage radioélectrique
subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.

This equipment complies with IC RSS‐102 radiation
exposure limits set forth for an uncontrolled environment.
Cet équipement est conforme aux limites d'exposition aux
radiations IC CNR‐102 établies pour un environnement
non contrôlé.
changes or modications not expressly approved by the
party responsible for compliance could void the user’s
authority to operate the equipment.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions: (1) this
device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.

This equipment has been tested and found to comply with
the limits for a Class B digital device, pursuant to Part 15 of
the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause
harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a
particular installation.
If this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment o and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and
receiver.
-- Connect the equipment into an outlet on a circuit
dierentfrom that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV
technician forhelp.
This equipment complies with FCC radiation exposure
limits set forth for an uncontrolled environment.This
transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.