Quick Start Guide

14
What if I am connected wirelessly but my connection seems slow or
keeps dropping?
Please re-read the Wireless Router section above.
What if I don’t know my MT8733’s Wireless Network Name/SSID or
Security Key/Password?
The default values are printed on the bottom label of the MT8733. Use these
unless you changed them. If you changed them, try to remember where you
put the new values. If you have a device that connects wirelessly to the
MT8733, it may show the Wireless Network Name/SSID and Password. You
can also find this information in the MT8733 Configuration Manager.
Information about using this is in the Configuration Manager section above.
If all else fails, reset the device to factory defaults by holding the Reset
button depressed for 10 seconds. (A paperclip helps.) You can then use the
default values.
What if I think that wireless devices are interfering with my MT8733
wireless router?
1. Where possible, put the MT8733 as far away as possible from interfering
devices such as Bluetooth transmitters and neighbors’ WiFi routers.
2. To try to pick a less used wireless channel for your MT8733, first go in
to your MT8733’s Configuration Manager.
• Then, click the Advanced button at the top of the page, then click the
Wireless and Scan/Bridge menu items at the top of the page.
• Click the ScanWirelessAPs button. A list will appear of competing
wireless networks, including the channels they are using. Write down
one or more of the less used channel numbers, since a less used
channel should be better for your MT8733.
• On the top of the page, click the Wireless Basic menu item.
• On the Basic page, select the channel you want in the Channel
pulldown, then click Save.
Do you have any other questions? We have lots more information at
www.motorolanetwork.com/mentor