User’s Guide 5“ Video Baby Monitor Models: MBP485, MBP485-2, MBP485-3, MBP485-4, The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Digital Video Baby Monitor! Thank you for purchasing your new Motorola Digital Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 12 13 14 15 16 17 RESET 1 7 3 4 8 9 5 10 6 11 Display (LCD screen) VIDEO ON/OFF button V Press to turn the LCD screen ON/ OFF (Note: audio is maintained.) 3. TALK button T Press and hold to speak to your baby 4. RESET button (recessed - use small pin) 5. UP button + Normal Mode: Tilt camera Up Menu Mode: Move Up menu options 6. DOWN button Normal Mode: Tilt camera Down Menu Mode: Move Down menu options 7. MENU button M Press to open / close the Menu options 8.
Parent Unit menu icons Signal Level Indication (5 Levels) Night Vision Mode (Video also changes to Black/White) Talk Mode On Battery Level Indication (4 Levels). Empty cell flashes when battery low. Zoom Level Control (1X, 2X) Brightness Level Control (5 Levels) Lullaby Control (5 Sound Selections) Alarm Setting (6h, 4h, 2h, Off) On status bar, indicates alarm set, and when flashing, that alarm time has been reached or missed.
Overview of the Baby Unit 2 1 3 5 4 6 7 8 9 1. 2. 3. 4. 5. 6. POWER ON/OFF switch Slide to turn the Baby Unit on or off. Microphone Infrared LEDs (6) Light Sensor (Night Vision Mode) Camera Lens Power/Link indicator Lights up in green when the Baby Unit is turned on and linking to the Parent Unit. Flashes when the Baby Unit is searching for the Parent Unit, or in pairing mode. 7. 8. 9. Off when the Baby Unit is powered off. PAIR button Press and hold to pair with a Parent Unit.
Table of contents 1. 2. Safety Instructions ..................................................................................... 7 Getting Started........................................................................................ 10 2.1 2.2 2.3 3. Using the Baby Monitor........................................................................... 13 3.1 3.2 3.3 3.4 3.5 4. 4.7 4.8 6 Setting up ..................................................................................................
ENGLISH 1. Safety Instructions WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1m (3ft) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
Baby Unit SET UP & USE: ● Choose a location for the Baby Unit that will provide the best view of your baby in their crib. ● Place the Baby Unit on a flat surface, such as a dresser, desk, or shelf or mount the Unit to a wall securely using the keyhole slots on the underside of the stand. ● NEVER place the Baby Unit or cords in the crib or within reach of the baby (the unit and cords should be more than 3 feet away).
ENGLISH • Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. • Do not touch the plug contacts with sharp or metal objects. CAUTION The Parent Unit includes a built-in, lithium-ion rechargeable battery pack, which is not a user-accessible item. If you think the battery needs replacing, please contact the helpline. Do not try to replace it yourself.
2. Getting Started 2.1 1. Baby Unit Power Supply Connect the small plug of the power adapter to the Baby Unit (camera) and the other end to a suitable mains power outlet. NOTE Only use the enclosed power adapter (5V DC /10000 mA). 2. Slide the POWER ON/OFF switch to the ON position. The power LED will light up in red. 3. Slide the POWER ON/OFF switch to the OFF position to turn the Baby Unit off. 2.
Connect the DC plug of the power adapter to the Parent Unit and the other end to a suitable mains power outlet. Only use the enclosed power adapter (5V DC / 1000mA) with the micro USB plug. 2. Press and hold the 0 POWER ON/OFF button for 3 seconds to turn ON the Parent Unit. 3.
2.3 Registration (Pairing) The Baby Monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedures below: 1. Press the M button of the Parent Unit and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, and del/ add menu will pop up. the 3.
3.1 ENGLISH 3. Using the Baby Monitor Setting up • Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the angle of the Baby Unit's camera by moving it up, down, left and right until you are satisfied with the image shown on the Parent Unit.
3.5 Temperature Display The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen in °C or °F (see 4.7 Temperature for how to change). If the temperature alert function is switched on, the parent unit will emit an alert tone if the temperature goes above the maximum setting or below the minimum setting, and will display a temperature warning icon in the middle of the screen (see 4.7 Temperature for how to set the alert and its limits).
4.1 1. 4.2 1. 2. 3. 4.3 1. 2. 3. 4.4 1. 2. 4.5 1. 2. 3. 4. Volume Press the Volume button - or + to adjust the volume level, the icon will pop up and you can select the desired volume level from level 0~8. (The default volume level setting is level 4, which is where it returns after being switched off, and level 0 is OFF .) Brightness Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted.
4.6 Camera Control 4.6.1 Add (pair) a camera Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted, and del/ add menu will pop up. the add, and press the 3. Press the + UP button or - DOWN button to select O button to confirm. 4. Camera / / / will pop up, press the + UP button or - DOWN button to select the desired Camera, and press the O button to start searching for a camera unit.
Scan camera This function is only available when you have more than 1 Baby Unit (Camera). 1. 2. scan, displays on the status bar. Press the O button repeatedly until The screen will then display images from different registered cameras in a loop of Camera / / / , changing about every 12 seconds. 4.7 Temperature 4.7.1 1. 2. 3. 4. 5. Temperature scale setting Press the M button and the menu bar will pop up. is highlighted.
4.8 Power Saving mode Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until V is highlighted. Press the + UP button or - DOWN button to select auto video off after 5 mins, 30 mins or 60 mins. Note: The audio will stay on and you can press any key to switch the video back on. 1. 2. 3.
ENGLISH 5. Disposal of The Device (environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
6. Cleaning Clean the Baby Monitor with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals – this may cause permanent damage to the product which is not covered by the warranty. • Keep the Baby Monitor away from hot, humid areas or strong sunlight, and don't let it get wet.
ENGLISH 7. Help Display No display • Try recharging or press the RESET button once. • Reset the units. Press the RESET button once on the Parent Unit and unplug both the units' electrical power, then plug them back in. • Is the unit turned on (green ON/OFF LED lit)? Press and hold the ON/OFF button 0 on the Parent Unit to turn it ON. • Is the correct camera selected? Change the camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF button V to turn it on.
Interference Noise interference on your Parent Unit • Your Baby and Parent Units may be too close. Move them farther apart. • Make sure there is at least 1 to 2 metres between the 2 units to avoid audio feedback. • lf the baby unit is too far away it may be out of range, so move the Baby Unit closer to the Parent Unit. • Make sure the Baby and Parent Units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. • Use of other 2.
ENGLISH 8. General Information lf your product is not working properly.... 1. 2. Read this User's Guide or the Quick Start Guide. Contact Customer Service: US and Canada 1-888-331-3383 Email: support@motorolastore.com If you think you need a battery replacement, please contact customer service. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
Who is covered? This Warranty extends only to the first consumer purchaser, and is not transferable. What will BINATONE do? BINATONE or its authorized distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear.
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage. Altered Products.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible.
ENGLISH Technical Specifications Baby Unit Frequency 2.4 GHz to 2.48 GHz Image sensor color CMOS 1M Pixels IR LED 6 pcs Power Adapter S006AKU0500100(TenPao) Input: 100-240V AC, 50/60Hz, 200mA; Output: 5V DC / 1000mA or, VT05EUS05100 (Vtech) Input: 100-240V AC, 50/60Hz, 150mA; Output: 5V DC / 1000mA WARNING Use only with supplied power supply.
Parent Unit Frequency 2.4 GHz to 2.48 GHz Display 5" diagonal TFT LCD Display colors 16.7M color LCD Brightness control 5 steps Volume control 8 steps + Off Power Adapter S006AKU0500100(TenPao) Input: 100-240V AC, 50/60Hz, 200mA; Output: 5V DC / 1000mA or, VT05EUS05100 (Vtech) Input: 100-240V AC, 50/60Hz, 150mA; Output: 5V DC / 1000mA WARNING Use only with supplied power supply. Battery (built-in) Lenovo (BL253) 3.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2018 Motorola Mobility LLC. All rights reserved. EN_US Version 1.