User’s Guide Video Baby Monitor Models: MBP481AXL, MBP481AXL-2, MBP481AXL-3, MBP481AXL-4 The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Baby monitor! Thank you for purchasing the MBP481AXL. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their play room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of Your Baby Unit 1 2 3 4 5 6 7 8 9 1. 2. 3. 4. 5. Power ON/OFF switch Slide to turn the Baby Unit on or off. Microphone For transmitting sound to the Parent Unit. Infra-red LEDs 6 infra-red LEDs for night vision. (Note: picture will not be in colour for night vision.) Light Sensor (Night Vision Mode) For detecting when to switch on the infra-red LEDs. Camera Lens For transmitting video to the Parent Unit. 6. 7. 8. 9.
Overview of the Parent Unit 4 1 5 2 6 3 7 8 1. 2. Sound Level indicators The sound level indicators show the sound level as detected by the Baby Unit - the louder the sound detected, the more LEDs turn on. Control key panel UP / VOLUME Press to increase the speaker volume. While in the menu, press to scroll up. While viewing a zoomed image, press and hold to move up the image. DOWN / VOLUME Press to decrease the speaker volume. While in the menu, press to scroll down.
Parent Unit Status Icons Connection status displays when strong signal strength is detected between the Baby Unit and the Parent Unit. or displays when moderate signal strength is detected between the Baby Unit and the Parent Unit. flashes when the Parent Unit is out of the valid range. - X displays when the link between the Baby Unit and the Parent Unit is lost. Patrol mode - Displays when the Parent Unit is in patrolling mode.
Table of contents 1. 2. Safety Instructions ..................................................................................... 6 Getting Started.......................................................................................... 9 2.1 2.2 2.3 3. Using Your Baby Monitor ........................................................................ 12 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 4. 5. 6. 7. 1 Connecting Baby Unit to power....................................................
ENGLISH 1. Safety Instructions WARNING: STRANGULATION HAZARD - Keep the unit and adapter cord more than 1 metre from the cot and out of the baby's reach. NEVER place Baby Unit or cords within the cot. Secure the cords more than 1 metre away from the baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided.
BABY UNIT SET UP & USE: ● Determine a location for the BABY UNIT that will provide the best view of your baby in his/her cot. ● Place the BABY UNIT on a flat surface, such as a dresser, bureau, or shelf or mount the Unit to a wall securely using the keyhole slots under the stand. ● NEVER place the Baby Unit or cords within the cot. WARNING This Baby Monitor is compliant with all relevant standards regarding electromagnetic fields and is, when handled as described in the User's Guide, safe to use.
ENGLISH CAUTION There is a risk of explosion if the battery is replaced by an incorrect type. Dispose of used batteries according to their instructions. Use only the rechargeable battery pack with rating: 3.
2. Getting Started 2.1 1. 2. 3. Connecting Baby Unit to power Insert the DC plug of the power adapter into the DC socket in the back of the Baby Unit. Connect the other end of the power adapter to a suitable mains power socket. Slide the ON-OFF switch to the ON position. NOTE Only use the power adapter provided.
Installing the battery and connecting Parent Unit to power A rechargeable battery pack is supplied and should be fitted, so that the Parent Unit can be moved without losing the link and picture from the Baby Unit(s). Charge the Parent Unit before you use it for the first time or when the Parent Unit indicates that the battery is low. BLACK RED Battery Pack 1. 2. 3. 4.
5. Connect the other end of the power adapter to a suitable mains power socket, the battery level indicator turns on. NOTE Only use the provided power adapter and battery pack. The Parent Unit can work with the power adapter connected but without a battery pack installed.
ENGLISH 3. Using Your Baby Monitor Please read these instructions carefully, and be aware that this baby monitor is only intended as an aid. It is not a substitute for responsible, correct parental supervision. 3.1 Power on or off the Baby Unit Slide the Power ON/OFF switch to turn on the Baby Unit. The Power/Link indicator light turns on. Slide the Power ON/OFF switch to turn off the Baby Unit. The Power/Link indicator light turns off. 3.
3.5 Adjust the LCD brightness of the Parent Unit You can adjust the brightness of the Parent Unit screen from Level 1 to Level 5. 1. Press when the Parent Unit is in camera viewing mode. is displayed. 2. Press or to adjust the brightness. 3. Press O to confirm your selection. 3.6 Set the alarm on the Parent Unit You can use the Parent Unit to set the alarm as a reminder for you to take care of your baby. Turn on and set the alarm when it is currently off: 1. 2. 3. 4. 5.
Delete a Baby Unit ENGLISH 3.8 You can choose to remove a paired Baby Unit from the Parent Unit. 1. 2. 3. 4. 5. Press when the Parent Unit is in camera viewing mode. Press < or scroll to . Press or to select the desired Baby Unit (1 , 2 , 3 or 4 ). Press O, then < or to choose YES ( ) or NO (X). Press O to confirm your selection. NOTE You cannot delete a Baby Unit if it is the only one paired. 3.
3.12 Pair and replace extra new Baby Unit The Baby Units and Parent Unit provided are already paired. You can add or replace a Baby Unit in your video and audio monitoring system. You can pair a maximum of four Baby Units to your Parent Unit. Each new Baby Unit must be paired to the Parent Unit before use. To pair and replace a Baby Unit: 1. 2. 3. 4. Press when the Parent Unit is in camera viewing mode. Press < or to scroll to . Press or to choose a desired Baby Unit number, then press O.
ENGLISH 4. Disposal of the Device (environment) At the end of the product life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be re-used if you take them to a recycling point.
5. Cleaning Clean your Baby Monitor with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the Baby Monitor with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your Baby Monitor away from hot, humid areas or strong sunlight, and do not let it get wet.
Power Indicator on the Parent Unit does not come on • Check whether the Parent Unit is powered on. • Check whether the battery pack supplied is correctly installed and that they are not drained. • Recharge the Parent Unit by connecting it to the power supply. Power/Link Indicator on the Baby Unit flashes • The Baby Unit may not be paired to the Parent Unit. Refer to section 3.10 to pair the Baby Unit. • The Parent Unit and the Baby Unit may be out of range with each other.
Cannot hear sound or baby crying from the Parent Unit • The volume level in the Parent Unit may be set too low. Increase the volume level of the Parent Unit. Refer to section 3.4 for volume level settings. • The Parent Unit and the monitoring Baby Unit may be out of range with each other. Reduce the distance between the units, but not closer than 1 metre. The baby monitor system produces a high-pitched noise • The Parent Unit and the Baby Unit are too close to each other.
ENGLISH 7. General Information lf your product is not working properly.... 1. 2. 3. Read this User’s Guide. Visit our website: www.motorolastore.com Contact Customer Service at: US and Canada 1-888-331-3383 Email: support@motorolastore.com To order a replacement battery pack for the Parent Unit, contact Customer Service.
Who is covered? This Warranty extends only to the first consumer purchaser, and is not transferable. What will BINATONE do? BINATONE or its authorised distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that does not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
Length of Coverage One (1) year from the date of the product's original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories' original purchase by the first consumer purchaser of the product. The balance of the original warranty or for Consumer Products and Accessories that are Repaired or Ninety (90) days from the date returned to the consumer, whichever is longer. Replaced Exclusions Normal Wear and Tear.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services.
FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible. FCC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons.
Technical Specifications Baby Unit (MBP481AXLBU) Frequency 2400 MHz - 2483.5 MHz Operating temperature 0ºC - 40ºC Image sensor Colour CMOS 0.3M Pixels Power Adapter S003GU0600050 (TenPao) Input 100-240VAC, 50/60Hz, 150mA Output DC6V, 500mA WARNING Use only with supplied power supply.
Parent Unit (MBP481AXLPU) Frequency 2400 MHz - 2483.5 MHz Operating temperature 0ºC - 40ºC Display 2.4" diagonal TFT LCD Brightness control 5 steps Power Adapter S003GU0600050 (TenPao) Input 100-240VAC, 50/60Hz, 150mA Output DC6V, 500mA WARNING Use only with supplied power supply. Battery rating GP80AAAHC3BMXZ (GPI) Or JHAAA800P3H (JUSTHIGH) 3.6V 800mAh Ni-MH rechargeable battery pack WARNING Do not use non-rechargeable batteries for the Parent Unit.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2019 Motorola Mobility LLC. All rights reserved. EN_US Version 1.
