User’s Guide 5" Video Baby Monitor Models: MBP36XL, MBP36XL-2, MBP36XL-3, MBP36XL-4 MBP36AXL, MBP36AXL-2, MBP36AXL-3, MBP36AXL-4 The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Digital Video Baby Monitor! Thank you for purchasing your new Motorola Digital Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 12 13 14 15 16 17 1 RESET 2 8 9 5 10 6 11 18 DC 5V 3 4 Display (LCD screen) VIDEO ON/OFF button V Press to turn the LCD screen ON/ OFF (Note: audio is maintained.) 3. TALK button T Press and hold to speak to your baby 4. RESET button (recessed - use small pin) 5. UP button + Normal Mode: Tilt camera Up Menu Mode: Move Up menu options 6. DOWN button Normal Mode: Tilt camera Down Menu Mode: Move Down menu options 7.
Parent Unit menu icons Signal Level Indication (5 Levels) Night Vision Mode (Video also changes to Black/White) Talk Mode On Battery Level Indication (4 Levels) Panning Camera Left Panning Camera Right Tilting Camera Up Tilting Camera Down Zoom Level Control (1X, 2X) Brightness Level Control (8 Levels) Lullaby Control (5 Sound Selections) Alarm Setting (6h, 4h, 2h, Off) On status bar, indicates alarm set, and when flashing, that alarm time has been reached or missed.
Overview of Your Baby Unit 8 1 2 3 1. 2. 3. 4. 9 4 10 5 6 7 11 12 Photo Sensor (Night Vision Mode) Camera Lens Infrared LEDs (x 8, for night vision) Power LED • On when linked to Parent Unit • Flashes when searching for Parent Unit 5. Microphone 6. Camera Battery LED • Flashes when AC power is connected to the camera. 7. POWER ON/OFF switch 8. Temperature Sensor 9. Power Adapter Socket 10. PAIR button 11. Speaker 12.
Table of contents 1. 2. Safety Instructions ..................................................................................... 7 Getting Started........................................................................................ 10 2.1 2.2 2.3 3. Using the Baby Monitor........................................................................... 14 3.1 3.2 3.3 3.4 3.5 3.6 4. 4.7 4.8 4.9 6 Setting up ..................................................................................................
ENGLISH 1. Safety Instructions WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 1m (3ft) away). Never use extension cords with AC Adapters. Only use the AC Adapters provided.
Baby Unit SET UP & USE: ● Choose a location for the Baby Unit that will provide the best view of your baby in their cot. ● Place the Baby Unit on a flat surface, such as a dresser, desk, or shelf or mount the Unit securely using the Star Grip or Tripod mount screw hole on the underside of the stand. ● NEVER place the Baby Unit or cords in the cot or within reach of the baby (the unit and cords should be more than 1 metre away).
ENGLISH • Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery packs. • Do not touch the plug contacts with sharp or metal objects. CAUTION The Baby Unit includes a built-in Ni-MH rechargeable battery pack and the Parent Unit includes a built-in, lithium-ion rechargeable battery pack, which are not user-accessible items. If you think the batteries needs replacing, please contact the helpline.
2. Getting Started 2.1 1. Baby Unit Power Supply Connect the micro-USB plug of the power adapter to the Baby Unit (camera) and the other end to a suitable mains power socket. NOTE Only use the enclosed power adapter (5V DC / 1000mA). 2. Slide the POWER ON/OFF switch to the ON position. The power LED will light up in Green. 3. Slide the POWER ON/OFF switch to the OFF position to turn the Baby Unit off.
Parent Unit Power Supply ENGLISH 2.2 IMPORTANT The Parent Unit is assembled with a built-in rechargeable battery pack (Lithiumion battery 2000mAh, to give up to 5 hours monitor operation), please charge it for 16 hours before initial use. The battery is not a user-accessible item. Please contact the helpline if you think it needs replacing. 1. Connect the DC plug of the power adapter to the Parent Unit and the other end to a suitable mains power socket.
When charging 1. 2. 12 If the Parent Unit is turned OFF with the adapter plugged in, a 2-pin plug logo will appear on-screen for about 5 seconds, and then a flashing battery logo will display for 15 seconds. The Blue LED at the top left will light up; indicating that the adapter is plugged in and charging is continuing. Whilst the power is ON, and the adapter is plugged in, the battery icon at the top right corner of the screen will show that the battery is charging.
Registration (Pairing) The Baby Monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedures below: 1. Press the M button of the Parent Unit and the menu bar will pop up. is highlighted, and 2. Press the < LEFT button or > RIGHT button until del/ add/ view/ scan menu will pop up. the add, and press the 3.
3. Using the Baby Monitor 3.1 Setting up • Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the angle of the Baby Unit's camera by using the pan and tilt function from the Parent Unit, to move up, down, left and right until you are satisfied with the image shown on the Parent Unit.
Temperature Display (HH °C / °F or LL °C / °F) The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen in °C or °F (see 4.7 Temperature for how to change). The readings will turn RED if the temperature goes above 29°C / 84°F or below 14°C / 57°F. The reading will change to HH °C / °F if the temperature goes above 36°C / 97°F. The reading will change to LL °C / °F if the temperature goes below 1°C / 34°F.
4. Parent Unit Menu Options 4.1 1. 4.2 1. 2. 3. 4.3 1. 2. 3. 4.4 1. 2. 4.5 1. 2. 3. 4. 16 Volume Press the Volume button - or + to adjust the volume level, the icon will pop up and you can select the desired volume level from level 0~8. (The default volume level setting is level 5, and level 0 is OFF .) Brightness Press the M button and the menu bar will pop up. is highlighted.
Camera Control 4.6.1 Add (pair) a camera Press the M button and the menu bar will pop up. is highlighted, and Press the < LEFT button or > RIGHT button until del/ add/ view/ scan menu will pop up. the add, and press the 3. Press the + UP button or - DOWN button to select O button to confirm. 4. Camera will pop up, press the + UP button or - DOWN / / / button to select the desired Camera, and press the O button to start searching for a camera unit.
4.6.3 Delete a camera Press the M button and the menu bar will pop up. is highlighted, and Press the < LEFT button or > RIGHT button until del/ add/ view/ scan menu will pop up. the del , and press the 3. Press the + UP button or - DOWN button to select O button to confirm. 4. Camera / / / will pop up, press the + UP button or - DOWN button to select the desired Camera, and press the O button. 5. Press the + UP button or - DOWN button to select , then press the O button to delete that registration.
Power Saving mode Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until V is highlighted. Press the + UP button or - DOWN button to select auto video off after 5 mins, 30 mins or 60 mins if operating on batteries only. Note: The audio will stay on and you can press any key to switch the video back on. 1. 2. 3. 4.9 View multiple cameras on screen This function is only available when you have more than 1 Baby Unit (Camera).
5. Disposal of The Device (environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
ENGLISH 6. Cleaning Clean the Baby Monitor with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals – this may cause permanent damage to the product which is not covered by the warranty. • Keep the Baby Monitor away from hot, humid areas or strong sunlight, and don't let it get wet.
7. Help Display No display • Try recharging or press the RESET button once. • Reset the units. Press the RESET button once on the Parent Unit and unplug both the units' electrical power, then plug them back in. • Is the unit turned on (green ON/OFF LED lit)? Press and hold the ON/OFF button 0 on the Parent Unit to turn it ON. • Is the correct camera selected? Change the camera number, if necessary. • Is the video display turned on? Press the VIDEO ON/OFF button V to turn it on.
Noise interference on your Parent Unit • Your Baby and Parent Units may be too close. Move them farther apart. • Make sure there is at least 1 to 2 metres between the 2 units to avoid audio feedback. • lf the baby unit is too far away it may be out of range, so move the Baby Unit closer to the Parent Unit. • Make sure the Baby and Parent Units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone. • Use of other 2.
8. General Information lf your product is not working properly.... 1. Read this User's Guide or the Quick Start Guide. 2. Contact Customer Service: Live Chat: motorolastore.support Email: support@hubbleconnected.com If you think you need a battery replacement, please contact customer service. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
ENGLISH Who is covered? This Warranty extends only to the first consumer purchaser, and is not transferable. What will BINATONE do? BINATONE or its authorised distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
Products Covered Consumer Products Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer.
How to Obtain Warranty Service or Other Information? To obtain service or information, please call: Live Chat: motorolastore.support Email: support@hubbleconnected.com You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a BINATONE authorised Repair Centre.
FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The socket-outlet shall be installed near the equipment and shall be easily accessible. FCC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons. IC Radiation Déclaration d'exposition Attention: Cet émetteur doit être installé pour fournir une distance de séparation d'au moins 20 cm de toute personne.
Technical Specifications Baby Unit Frequency Band 2400 MHz to 2483.5 MHz Image Sensor colour CMOS 1M Pixels Operating Temperature Arange Power Adapter 0 °C ~ +40 °C S006AKU0500100 / Tenpao Input: 100-240V AC, 50/60Hz, 200mA; Output: 5.0V DC, 1000mA WARNING Use only with supplied power supply. Battery (built-in) GPI INTERNATIONAL LTD. 3.
Frequency Band Display 2400 MHz to 2483.5 MHz 5" diagonal TFT LCD Brightness control 8 steps Volume control 8 steps+Off Operating Temperature Arange Power Adapter ENGLISH Parent Unit 0 °C ~ +40 S006AKU0500100 / Tenpao Input: 100-240V AC, 50/60Hz, 200mA; Output: 5.0V DC, 1000mA WARNING Use only with provided power supply. Battery (built-in) Lenovo (BL253) 3.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2019 Motorola Mobility LLC. All rights reserved. US_EN Version 5.