User’s Guide Digital Video Baby Monitor Models: MBP30A, MBP30A-2, MBP30A-3, MBP30A-4 The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Digital Video Baby Monitor! Thank you for purchasing your new Motorola Digital Video Baby Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 10 11 12 14 1 POWER 15 2 6 3 7 4 8 5 9 13 1. 2. 3. 4. 5. 6. 7. 8.
Parent unit menu and display icons Signal Level (4 Levels) Night Vision Mode (Screen changes to Black/White) Talk Mode Battery Level Control (5 Levels) Pan Left Pan Right Tilt Up Tilt Down a Volume Level Control (5 Levels + OFF) Zoom Level Control (1X, 2X) Brightness Level Control (5 Levels) Lullaby Control (5 Sound Selections) Alarm Setting (6h, 5h, 4h, 3h, 2h or OFF). Also appears at the top of the display when set, and in the middle of the display when the alarm time is reached.
Overview of Your Baby Unit 9 1 2 4 7 6 1. Photo Sensor (Night Vision Mode) 2. Camera Lens 3. Infrared LEDs 4. Power LED 5. Microphone 6. Speaker 7. Power Switch ON/OFF PAIR 11 3 5 10 12 8 8. Power Adapter Socket 9. Antenna 10. Temperature Sensor 11. Pair Key 12. Screw mounting hole (To install a StarGrip accessory for flexible mounting options.
Table of contents 1. 2. Safety Instructions ..................................................................................... 7 Getting Started........................................................................................ 10 2.1 2.2 2.3 2.4 3. Using the Baby Monitor........................................................................... 13 3.1 3.2 3.3 3.4 3.5 3.6 4. 4.7 4.8 6 Setting up ..................................................................................................
ENGLISH 1. Safety Instructions WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep the unit and adapter cord more than 1 metre from the cot and out of the baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided.
CAMERA SET UP & USE: ● Determine a location for the Baby Unit that will provide the best view of your baby in his/her cot. ● Place the BABY UNIT on a flat surface, such as a dresser, bureau or shelf. ● NEVER place the Baby Unit or cords within the cot or within reach of the baby (the unit and cords should be more than 1 metre away).
ENGLISH • Only use the chargers and power adapters provided. Do not use other chargers or power adapters as this may damage the device and battery pack. • Only insert a battery pack of the same type. • Do not touch the plug contacts with sharp or metal objects. CAUTION There is a risk of fire or explosion if the parent unit battery is replaced by an incorrect type. Only use a Ni-MH rechargeable battery pack with rating: 3.6V, 800mAh. Dispose of used batteries according to their instructions.
2. Getting Started 2.1 1. Baby Unit Power Supply Connect the small plug of the power adapter to the baby unit (camera) and the other end to a suitable mains power socket. NOTE Only use the enclosed power adapter (6V DC / 800mA). 2. 3. 2.2 Slide the ON/OFF switch to the ON position. The power LED will light up in green. Slide the ON/OFF switch to the OFF position to turn the Baby Unit off. Parent Unit Battery Installation Black Red 1.
Parent Unit Power Supply ENGLISH 2.3 IMPORTANT Installing the rechargeable battery pack and charging it fully before use is recommended, to allow temporary operation of the parent unit in the event of a power failure or if the parent unit is moved. 1. 2. 3. 4. 5. Connect the small plug of the power adapter to the parent unit and the other end to a suitable mains power socket. Only use the enclosed power adapter (6V DC / 500mA) with the slightly smaller DC plug.
2.4 Registration (Pairing) The Baby monitor is pre-registered to your Parent Unit. You do not need to register it again unless the Baby Unit loses its link with the Parent Unit. To re-register your Baby Unit, or register a new Baby Unit, follow the procedure below: 1. Press the M button of the parent unit and the menu bar will pop up. is highlighted and 2. Press the < LEFT button or > RIGHT button until then press the O button so the Add/ Delete menu will pop up. 3.
3.1 Setting up • Place the baby unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor. • Adjust the baby unit's head angle with pan and tilt until you are satisfied with the image in the parent unit. NOTE Do not place the baby unit within the baby's reach! If there is interference with the picture or sound, try moving the units to different locations, and ensure they are not close to other electrical equipment. 3.
3.6 Temperature Display The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the LCD screen, or at the bottom in split screen mode. If the temperature alarm is turned on, the Parent Unit will beep and display Temperature High or Temperature Low when the temperature at the Baby Unit is above or below the maximum or minimum temperature limits set for the alarm. (Max: 25-37ºC/77-99ºF. Min: 10-24ºC/50-76ºF).
4.1 1. 2. 3. 4.2 1. 2. 3. 4. 4.3 1. 2. 3. 4. 4.4 1. 2. 3. 4. ENGLISH 4. Parent Unit Menu Options Volume Press the M button and the menu bar will appear with highlighted. Press the O button to show the volume set level. Press the + UP button or - DOWN button to select the desired volume level from level 0 ~ 5. (The default volume level setting is level 3.) Brightness Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted.
4.5 1. 2. 3. 4. 5. Alarm Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted. Press the O button to show the alarm Off / On setting. Press the + UP button or - DOWN button to select Alarm ON, then press O and + UP or - DOWN to select the alarm time 6h, 5h , 4h, 3h, 2h. (The default setting is Alarm OFF.
1. 2. 3. 4. 5. 6. Delete a camera Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted. Press the O button to confirm. The Add / Delete menus will pop up. Press the + UP button or - DOWN button to select Delete, and press the O button to confirm. cam 1 / cam 2 / cam 3 / cam 4 will pop up, press the + UP button or - DOWN button to select the Camera to delete and press the O button to delete that registration.
4.7 Temperature Setting 1. 2. 3. Press the M button and the menu bar will pop up. Press the < LEFT button or > RIGHT button until is highlighted. Press the O button to show the temperature options. 4. The temperature setting / / will pop up. Temperature Format - to select either Centigrage or Fahrenheit . Temperature Limit to define the High temperature limit (25-37oC/ 77-99oF) and Low temperature limit (10-24oC/50-76oF).
ENGLISH 5. Disposal of The Device (environment) At the end of the product lifecycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the product, user's guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
6. Cleaning Clean the baby monitor with a slightly damp cloth or with an anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals –- this may cause permanent damage to the product which is not covered by the warranty. • Keep your baby monitor away from hot, humid areas or strong sunlight, and don't let it get wet.
ENGLISH 7. Help Display No display • Try recharging or replacing the battery pack. • Reset the units. Disconnect the battery pack of the parent unit and unplug both the units' electrical power, then plug them back in. • Is the unit turned on? Press and hold the ON/OFF button P on the parent unit to turn it ON. • Slide the ON/OFF switch on the Baby Unit (Camera) to ON. • Is the correct camera selected? Change the camera number, if necessary.
Interference Noise interference on your parent unit • Your baby and parent units may be too close. Move them farther apart. • Make sure there is at least 1m to 2m (3 to 6 feet) between the 2 units to avoid audio feedback, and reduce the volume of the Parent Unit. • lf the baby unit is too far away it may be out of range, so move the baby unit closer to the parent unit. • Make sure the baby and parent units are not near other electrical equipment, such as a television, computer or cordless/mobile telephone.
ENGLISH 8. General Information lf your product is not working properly.... 1. Read this User's Guide or the Quick Start Guide. 2. Contact Customer Service: US and Canada 1-888-331-3383 Email: support@motorolastore.com To order a replacement battery pack, contact customer service. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
Who is covered? This Warranty extends only to the first consumer purchaser, and is not transferable. What will BINATONE do? BINATONE or its authorised distributor at its option and within a commercially reasonable time, will at no charge repair or replace any Products or Accessories that do not conform to this Warranty. We may use functionally equivalent reconditioned/ refurbished/ pre-owned or new Products, Accessories or parts.
Consumer Accessories Consumer Products and Accessories that are Repaired or Replaced Length of Coverage One (1) year from the date of the products original purchase by the first consumer purchaser of the product. Ninety (90) days from the date of the accessories original purchase by the first consumer purchaser of the product. The balance of the original warranty or for Ninety (90) days from the date returned to the consumer, whichever is longer. Exclusions Normal Wear and Tear.
Altered Products. Products or Accessories with (a) serial numbers or date tags that have been removed, altered or obliterated; (b) broken seals or that show evidence of tampering; (c) mismatched board serial numbers; or (d) nonconforming or non-Motorola branded housings, or parts, are excluded from coverage. Communication Services.
FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
WARNING Changes or modifications, to this equipment not expressively approved by the party responsible for compliance could void the user’s authority to operate the equipment. The socket-outlet shall be installed near the equipment and shall be easily accessible. CC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons.
ENGLISH Technical Specifications BABY UNIT Frequency Band 2400 MHz to 2483.5 MHz Image Sensor colour CMOS 0.3M Operating Temperature Arange 0 °C ~ +50 °C Power Adapter CS6F060080FUF (CHOUSEN) Input: 100-240V AC, 50/60Hz, 200mA; Output: 6.0V DC, 800mA WARNING Use only with supplied power supply.
PARENT UNIT Frequency Band 2400 MHz to 2483.5 MHz Display Brightness control 3" diagonal TFT LCD 5 steps Volume control 5 steps+Off Operating Temperature Arange Power Adapter 0 °C ~ +50 °C S003GU060050(Tenpao) Input: 100-240V AC, 50/60Hz, 200mA; Output: 6.0V DC, 500mA WARNING Use only with provided power supply. Battery GP80AAAHC3BMXZ (GPI) or JHAAA800P3H (JUSTHIGH) Ni-MH AAA 3.6V 800mAh Ni-MH rechargeable battery pack WARNING Do not use non-rechargeable batteries for the Parent Unit.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo, are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2019 Motorola Mobility LLC. All rights reserved. EN_US Version 1.