User’s Guide MBP20 Baby Monitor The features described in this user's guide are subject to modifications without prior notice.
Welcome... to your new Motorola Baby Monitor! Thank you for purchasing the MBP20. Now you can see and hear your baby sleeping in the other room or you can monitor your older children in their play room. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of your Parent unit 1 9 8 7 2 3 5 4 3 UP / Volume + In idle mode: Press to increase the speaker volume. In menu mode: Press to view the previous menu item. 4 Menu / OK In idle mode: Press to access the main menu. In menu mode: Press to access the sub-menu, or confirm the settings. 5 DOWN / Volume In idle mode: Press to decrease the speaker volume. In menu mode: Press to view the next menu item. 6 Talk In idle or menu mode: Press and hold to talk back with baby unit.
9 Charging Indicator On steadily when in charging mode. Indicates when speaker of parent unit is muted. Indicates the speaker volume level of parent unit. Flashes when low battery is detected. NOTE Off even if connected with power adapter but without battery pack installed. Indicates when parent unit or baby unit is playing lullaby. Indicates when timer alarm is activated. Indicates when the sound alert is set on. Parent Unit Display Low battery, needs charging. Icons 1/2 battery level.
Overview of your Baby unit 1 2 3 4 1 5 2 6 7 8 3 9 5 8 7 4 6 9 Infrared Light Camera Power Indicator On when the baby unit is switched on. Off when the baby unit is switched off. UP / Volume + Press to increase the speaker volume. Power Press and hold to power on/off the baby unit. DOWN / Volume Press to decrease the speaker volume. Stop Press to stop the lullaby playing. Play Press to play the lullaby. Lullaby Press to select the lullaby and start playing the selected lullaby.
Important guidelines for installing our Baby Monitor • To use your baby unit and parent unit together, you must be able to establish a radio link between them, and the range will be affected by environmental conditions. • Any large metal object, like a refrigerator, a mirror, a filing cabinet, a metallic doors or reinforced concrete, between the baby and parent unit may block the radio signal.
1. SAFETY INSTRUCTIONS ................................... 8 2. GETTING STARTED............................................ 9 2.1 Baby unit power supply.......................................9 2.2 Parent unit battery installation.............................9 2.3 Belt clip on parent unit ......................................10 3. USING YOUR BABY MONITOR........................ 11 3.1 Power on/off the parent unit..............................11 3.2 Power on/off the baby unit ...............................
1. SAFETY INSTRUCTIONS WARNING: STRANGULATION HAZARD - Keep the adapter cord out of baby's reach. NEVER place the baby monitor or its cord within the cot. Secure the cord some distance away from baby's reach. Never use extension cords with AC Adapters. Only use the AC Adapters provided. CAMERA SET UP & USE: • Determine a location for the CAMERA that will provide the best view of your baby in his cot. • Place the CAMERA on a flat surface, such as a dresser, bureau, or shelf.
2. GETTING STARTED 2.1 Baby unit power supply 2.2 Parent unit battery installation The parent unit comes with a battery pack. Charge the parent unit before you use it for the first time or when the parent unit indicates that the battery is low. DC JACK Battery JACK DC PLUG Battery PLUG 1. Insert the power adapter with smaller pin plug into the side of the baby unit, as shown. 2. Connect the other end of the power adapter to the power outlet. NOTE Only use the provided power adapter.
3. Insert the supplied battery pack, and fit the battery pack into the compartment. 2.3 Belt clip on parent unit 4. Reattach the battery compartment cover, and reinstall the belt clip (refer to section 2.3). 5. Insert the power adapter with bigger pin plug into the side of the parent unit. 6. Connect the other end of the power adapter to the power outlet. 7. The Charging Indicator comes on. NOTE Only use the provided power adapter. 1. Attach the belt clip to the lock slots on the back sides. 2.
3. USING YOUR BABY MONITOR 3.3 Please read these instructions carefully, and be reminded that this baby monitor is just intended as an aid. It is not a substitute for responsible, correct parental supervision. There are 5 volume levels on the baby unit, and 6 levels on the parent unit, including VOLUME OFF. The volume level of parent unit will be shown on the status bar when you adjust the volume. 3.1 Power on/off the parent unit 1.
3.4.1 Adjust talk back volume The baby unit has 5 volume levels from Level 1 to Level 5. During Talk Back, press > or < on the baby unit to increase or decrease the volume respectively. NOTE The lullaby will stop playing back when talk back is activated. 3.
NOTE The parent unit still carries on audio monitoring even if the video capture is turned off. 4. Parent unit settings 4.1 Set the language 1. Press 1 to access main menu. To switch the video feed from the current monitoring parent unit to the other parent unit which is not in video monitoring mode: 2. Press + or - to select LANGUAGE. 1. Press 6 on the current video monitoring parent unit, the screen will be blank without video image received. 4. Press + or - to select the desired language. 2.
4.2.2 Set the timer 4.4 Sound alert 2. Press + or - to select SET TIMER. When the sound alert is set ON, the baby unit monitors continuously and the sound* can be heard on the parent unit even its speaker volume is off. 4. Press 1 to confirm. 2. Press + or - to select SOUND ALERT. 1. Repeat steps 1 to 3 in section 4.2.1. 3. Press 1 and then set the hour and minute continuously. NOTE Once the time reaches, the unit will emit alert beep and show 00:00 counter on the screen.
4.6 Reset You can restore all the adjustable settings back to their original factory settings. 1. Press 1 to access main menu. 2. Press + or - to select RESET. 3. Press 1 and display will show CONFIRM?. 4. Press 1 to confirm. The unit will be reset and then back to idle state. 5. DISPOSAL OF THE DEVICE (ENVIRONMENT) At the end of the product lifecycle, you should not dispose of this product with normal household waste.
6. CLEANING 7. TROUBLESHOOTING Clean MBP20 with a slightly damp cloth or with an antistatic cloth. Never use cleaning agents or abrasive solvents. Link light on the parent unit does not come on Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals - this may cause permanent damage to the product which is not covered by the warranty. • Keep your MBP20 away from hot, humid areas or strong sunlight, and do not let it get wet.
• Battery pack in parent unit may be running low. Connect the parent unit to the mains power with the supplied power adaptor for recharging. Cannot view the video image of baby from the parent unit • Video feed maybe turned off. Activate the video feed by pressing 6. • The parent unit and the baby unit may be out of range with each other. Reduce the distance between the units, but not closer than 5 feet. • Battery pack in parent unit may be drained.
8. GENERAL INFORMATION If your product is not working properly... 1. Read this User's Guide. 2. Visit our website: www.motorola.com 3. Contact Customer Service at UK 0845 218 0890 ROI 08187 62092 To order a replacement battery pack for parent unit, contact customer service. Consumer Products and Accessories Limited Warranty ("Warranty") Thank you for purchasing this Motorola branded product manufactured under license by Binatone Electronics International LTD ("BINATONE").
ACCESSORIES TO THE FULL EXTENT THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another.
Unauthorized Service or Modification. Defects or damages resulting from service, testing, adjustment, installation, maintenance, alteration, or modification in any way by someone other than MOTOROLA, BINATONE or its authorized service centers, are excluded from coverage. Altered Products.
9. TECHNICAL SPECIFICATIONS Parent Unit : Baby Unit: Frequency 1881.792 MHz - 1897.344 MHz Channels 10 Operating temperature 5oC - 45oC Display 1.5" CSTN LCD Frequency 1881.792 MHz - 1897.344 MHz Channels 10 Operating temperature 5oC - 45oC Image sensor Colour CMOS 30M Pixels Lens f 3.6mm, F 2.
BINATONE TELECOM PLC 1 Apsley Way London NW2 7HF,United Kingdom. Tel: +44(0) 20 8955 2700 Fax: +44(0) 20 8344 8877 e-mail: binatoneuk@binatonetelecom.co.uk ________________________________________ . EC Declaration of Conformity We the manufacturer / Importer : Binatone Telecom Plc 1 Apsley Way London NW2 7HF, United Kingdom.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2011 Motorola Mobility, Inc. All rights reserved. Version 1.