Universal Bluetooth® Headset H780 H780 MOTOMANUAL
Figure 1 3 1 4 2 5 7 6 Figure 2 1
Figure 3 Figure 4 2 Figure 5
English European Union Directives Conformance Statement Hereby, Motorola Inc., declares that this H780 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. You can view your product’s Declaration of Conformity (DoC) to Directive 1999/5/EC (the R&TTE Directive) at www.motorola.com/rtte. Caring for the Environment by Recycling When you see this symbol on a Motorola product, do not dispose the product with household waste.
English Before you begin See figure 1 on page 1. Take a moment before you get started to familiarize yourself with your new H780 Headset. 1 Speaker 2 Call Button 3 Volume Buttons 4 Power Switch 5 Microphone 6 Noise Cancellation Button 7 Indicator Light/Microphone (on side) Charging your headset See figure 2 on page 1. The indicator light turns red when the battery is charging. It may take up to 1 minute for the indicator light to turn on.
English Quick battery check While your headset is turned on and not on a call, you can check the battery charge level by pressing and holding both Volume buttons. Note: This feature does not work when headset is in pairing mode. The indicator light displays charge status until you release the buttons. The colour of the light indicates the remaining talk time. Headset Indicator Red Yellow Green Available Talk Time Less than 2 hours From 2 to 4.5 hours Greater than 4.
English Turning headset on and off See figure 1 on page 1. To turn ON your H780, slide the Power switch towards the indicator light. The indicator light first flashes blue for several seconds, then: UÊÊy>à iÃÊLÕiÊvÊ«>Ài`Ê>`ÊViVÌi`ÊÜÌ Ê>Ì iÀÊ`iÛVi®° UÊÊLiViÃÊÃÌi>`ÞÊLÕiÊvÊÀi>`ÞÊÌÊLiÊ«>Ài`®° To turn OFF your H780, slide the switch toward the charging plug (the orange color under the switch is displayed). The indicator light will turn off.
English Pairing your headset Your phone’s Bluetooth feature is off by default. To use your headset, you must turn on the Bluetooth feature in your phone. Please check your phone’s user’s guide. Before you can use your headset, you must pair (link) it with your phone. 1 Ensure headset is in pairing mode Power on the headset by sliding Power switch to the On position. The indicator light first flashes during power up, then initiates pairing.
English Using your headset : making and receiving calls Your headset supports both Handsfree and Headset Profiles. Accessing call functions depends upon which profile your phone supports. See your phone’s user’s guide for more information. Note: some features are phone/network dependent.
English Using your headset with a second phone Multipoint technology allows you to make and receive calls from two Bluetooth enabled devices like your personal and business phones. 1 To pair a second phone to your headset ÊÊUÊÊÊ/ÕÀÊvvÊ>ÞÊ« iÃÊÀÊ`iÛViÃÊÌ >ÌÊ>ÀiÊ>Ài>`ÞÊ«>Ài`ÊÜÌ ÊÞÕÀÊ i>`ÃiÌ° ÊÊUÊÊÊ/ÕÀÊvvÊÞÕÀÊ i>`ÃiÌ° ÊÊUÊÊÊ*>ÀÊÞÕÀÊ i>`ÃiÌÊÜÌ ÊÞÕÀÊÃiV`Ê« iÊ>ÃÊ`iÃVÀLi`Êʺ*>À}ÊÞÕÀÊ headset” section).
English Indicator lights With No Charger Plugged In Headset Indicator Off 3 blue flashes Steady blue Quick blue/purple flashes Quick blue flash Quick purple flash Slow blue pulse Slow blue flash Slow green flash Red flash Slow purple pulse Quick red flash Headset Statuts Power off Powering on/off Pairing mode Pairing successful Incoming/outgoing call on primary phone Incoming/outgoing call on secondary phone Connected (on a call) Standby (phone connected, not on a call) Standby (2 phones connected, not on a call)
English Audio tones Audio Tone Ring tone Short tone High to low tone 2 short tones when pressing Volume button during a call Ascending tone Low tone (repeated every 15 seconds) Descending tone Low to high tone No audio indications ; deteriorating quality 2 tones repeated every minute Headset Status Incoming call Phone network not available End call Volume at minimum or maximum Mute enabled Mute reminder Mute disabled Connection confirmation/voice activation Out of range Low battery 11
English Troubleshooting My headset will not enter pairing mode Make sure that any devices previously paired with the headset are turned off. If the indicator light is flashing in blue, first turn off the other device, then turn the headset off and on. The indicator light becomes steadily lit in blue indicating the headset is now in pairing mode. My headset will not pair with my phone Turn the headset on by using the Power switch. Press the Call button and both Volume buttons for 5 seconds.
motorola.com MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. All other product or service names are the property of their respective owners. The Bluetooth trademark and logos are owned by the Bluetooth SIG, Inc. and any use of such marks by Motorola, Inc. is under license. © 2007 Motorola, Inc. All rights reserved. 6803578F63 - Printed in the EU.