Manual

ManualsBrandsMotorola ManualsHeadphoneH670

motorola

Bluetooth

Handsfree Headset

Get connected in 4 quick steps.

H670

Volume

Buttons

Call Button/

Slide Switch

Multi-Color

Indicator Light

Microphone

Speaker

(on reverse

side)

Before using this product, read the Important Safety and Legal

Information pamphlet and follow its instructions.

Take a moment before you get started to

familiarize yourself with your new

H670 Headset.

BEFORE YOU BEGIN

Charging

Port

CHARGE

Your Headset's Battery

Verify slide switch is in the off position (toward

the charging port).

Plug the Motorola charger into the end of the

headset.

The indicator light turns red when the battery is

charging. It may take up to 1 minute for the

indicator light to turn on. When the headset's

battery is fully charged (about 2 hours), the

indicator light turns off.

Disconnect the charger.

Note: Headset is not functional while charging.

Note: For optimal performance, make sure that the

headset is off while charging.

START BLUETOOTH

FEATURE

Yo u r P h o n e

Press (

Menu) > Settings > Connection >

Bluetooth Link > Setup.

Scroll to Power.

Select Change.

Scroll to On.

Press Select to turn on the Bluetooth

feature. The Bluetooth feature remains on

until you turn the feature off.

Note: These steps are for most Motorola phones.

For other phones, see your phone's user's guide.

Your phone's Bluetooth feature is off by default.

To use your headset, you must turn on the

Bluetooth feature in your phone.

For most Motorola phones (at the main menu):

Summary of content (5 pages)

PAGE 1
motorola Bluetooth Handsfree Headset BEFORE YOU BEGIN ® Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. Take a moment before you get started to familiarize yourself with your new H670 Headset. Call Button/ Slide Switch Multi-Color Indicator Light Volume Buttons Microphone H670 1 Speaker (on reverse side) Get connected in 4 quick steps.
PAGE 2
3 PAIR Your Headset Before you can use your headset, you must pair (link) it with your phone. Step A - ENSURE HEADSET IS IN PAIRING MODE Power on headset by sliding the Call button towards the microphone to initiate easy pairing. After a few moments, the indicator light will be steadily lit in blue to indicate headset is in pairing mode. www.hellomoto.
PAGE 3
USING YOUR H670 See Features and Functions Guide on the reverse side for information on using your H670 Note: If desired, your headset can be restored to original factory settings. This action will erase all pairing information stored in your headset. Thus, you will need to pair your phone and headset again (see step 3). To restore your headset to original factory settings, press and hold both Volume buttons and the Call button at the same time for 10 seconds.
PAGE 4
EARHOOKS AND YOUR HEADSET Your H670 headset is supplied with multiple earhooks. The earhook is attached onto a hinge pin, and is placed onto your ear when using your headset. To install an earhook on your headset: 1 Open the attached Once you have attached your desired earhook, follow these steps to wear your headset on your ear: 1 Open the attached 1 earhook 45 degrees from the headset. earhook 90 degrees from the headset.
PAGE 5
MAKING CALLS MAKING CALLS CONTINUED Function Action Function Action Receive a call Tap the Call button Tap the Call button Mute or unmute a call Tap both Volume buttons Answer a second incoming call End an active call and resume a call on hold Tap the Call button Disable the indicator light First slide the switch toward charging plug (to turn headset off), then press and hold both Volume buttons AND slide the switch towards the microphone (to turn headset on) Reject a call Press and hold a V