Owner's Manual H605 Handsfree Headset

ManualsBrandsMotorola ManualsHeadphoneH605

1 - CHARGE

2 - START

BLUETOOTH

FEATURE

3 - PAIR

4 - TEST AND USE

Get Connected in

4 Quick Steps

H605

Bluetooth®

Handsfree Headset

Start Here > > >

BEFORE YOU

BEGIN

Before using this product, read the Important Safety and

Legal Information pamphlet and follow its instructions.

Take a moment before you get started to

familiarize yourself with your new

H605 Handsfree Headset.

Call

Button

Volume

Buttons

Earpiece/

Speaker

Blue

Indicator

Light

Microphone

Charge your headset's battery for 2 hours:

The blue indicator light

turns on when the

battery is charging. It

may take up to 1

minute for the light to

turn on. When the

headset's battery is

fully charged (about 2

hours), the blue

indicator light turns off.

Unplug the charger

from the headset.

CHARGE

Your Headset's Battery

Note: Headset is not functional while charging.

Plug the Motorola charger into the end

of the headset.

START BLUETOOTH

Feature

On Your Phone

Select (Menu) > Settings > Connection >

Bluetooth Link > Setup.

Scroll to Power.

Press Change.

Scroll to On.

Press Select to turn on the Bluetooth

feature. Bluetooth feature remains on until

you turn it off.

Your phone's Bluetooth feature is off by

default. To use your headset, turn on the

Bluetooth feature in your phone.

For most Motorola phones:

Note: These steps are for most Motorola phones. For

other phones, see your phone's user's guide.

Summary of content (5 pages)

PAGE 1
BEFORE YOU BEGIN Start Here > > > Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. H605 Bluetooth® Handsfree Headset Get Connected in 4 Quick Steps Take a moment before you get started to familiarize yourself with your new H605 Handsfree Headset.
PAGE 2
TROUBLESHOOTING My phone does not find my headset. Make sure the blue light on your headset is steadily lit when your phone is searching for devices (see step 3). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 2). If the Bluetooth feature has been turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 2).
PAGE 3
4 TEST AND USE Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call: 1 Place the headset over your ear. See "Wearing the Headset" on the reverse side of this guide. USING YOUR H605 See Features and Functions Guide on the reverse side of this guide for information on using your H605. 2 On your phone, dial the number you want to call and press the Send key.
PAGE 4
CHANGING FOR USE ON OTHER EAR WEARING THE HEADSET 1 Place the end of the headset with the blue indicator light near the top of your ear facing backwards. Blue Indicator Light 1 You can wear your H605 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear: 1 Rotate the speaker 180 degrees, turning counter-clockwise. 2 Slide the headset 2 2 Direct the speaker by tilting and rotating it down and around along the back of your ear.
PAGE 5
MAKING CALLS MAKING CALLS CONTINUED Function Action Function Action Make a voice dial call Tap the Call button and speak the name after the tone Toggle between two active calls Press and hold the Call button Join a 3-way call End a call Tap the Call button Press and hold both Volume buttons Receive a call Tap the Call button Reject a call Press and hold the Call button until you hear a beep Put an active call on hold or resume a call on hold Press and hold the Call button until you hear a