Bluetooth Headset User Manual

ManualsBrandsMotorola ManualsHeadphoneH350

1 - CHARGE YOUR

HEADSET

2 - PUT HEADSET

IN PAIR MODE

3 - PAIR PHONE

WITH HEADSET

4 - TEST AND USE

Get Connected in

4 Quick Steps

H350

Bluetooth®

Handsfree Headset

BEFORE YOU

BEGIN

Before using this product, read the Important Safety and

Legal Information pamphlet and follow its instructions.

Take a moment before you get started to

familiarize yourself with your new

H350 Handsfree Headset.

Earhook

Volume

Buttons

Blue

Indicator

Light

Call

Button

Microphone

Charge your headset's battery for 2 hours:

Plug the Motorola charger into the end of

the headset.

The blue indicator light turns on when the

battery is charging. It may take up to 1

minute for the light to turn on. When the

headset's battery is fully charged (about 2

hours), the blue indicator light turns off.

Unplug the charger from the headset.

CHARGE YOUR

HEADSET

Note: Headset is not functional while charging.

PUT YOUR HEADSET IN

PAIRING MODE

With the headset power off, press and hold

the Call button for 6 to 10 seconds until the

blue indicator light turns on and remains

steadily lit.

Before you can use your headset, you must

pair (link) it with your phone.

Note: The blue light will flash as you press and hold the Call

button. Continue holding down the Call button until the blue

light is steadily lit.

Note: If you let go of the Call button before the blue light is

on and steady, ensure that your headset is off before trying

again.

Note: To turn off headset, see "Turning Headset On/Off" on

the reverse side of this guide.

Call Button

Blue Indicator Light

Summary of content (5 pages)

PAGE 1
BEFORE YOU BEGIN Before using this product, read the Important Safety and Legal Information pamphlet and follow its instructions. H350 Bluetooth® Handsfree Headset Get Connected in 4 Quick Steps Take a moment before you get started to familiarize yourself with your new H350 Handsfree Headset.
PAGE 2
TROUBLESHOOTING My phone does not find my headset. Make sure the blue light on your headset is steadily lit when your phone is searching for devices (see step 2). My headset worked before but now it's not working. Make sure your phone is on and the Bluetooth feature is turned on in your phone (see step 3). If the Bluetooth feature has been turned off or was turned on only temporarily, you may need to restart the Bluetooth feature (see step 3).
PAGE 3
TEST AND USE USING YOUR H350 Your phone and headset are now paired and ready to make and receive calls. To confirm they are operating properly, make a call: See Features and Functions Guide on the reverse side of this guide for information on using your H350. 4 1 Place the headset over your ear. See "Wearing the Headset" on the reverse side of this guide. 2 On your phone, dial the number you want to call and press the Send key.
PAGE 4
WEARING THE HEADSET CHANGING FOR USE ON OTHER EAR 2 Loop the earhook over your ear. You can wear your H350 headset on your left or right ear. The headset comes ready for the right ear. To change the headset for the left ear: 3 Press the headset to your ear. 1 Open the earhook 90 1 Open the earhook. degrees from the headset. 2 Gently lift and pull the top of the earhook up and off the upper hinge pin. Then, pull it away to remove it. 1 Open Earhook 2 Pull Earhook Up 3 Flip the headset over.
PAGE 5
MAKING CALLS MAKING CALLS CONTINUED Function Action Function Action Make a voice dial call Tap the Call button and speak the name after the tone Toggle between two active calls Press and hold the Call button Join a 3-way call End a call Tap the Call button Press and hold both Volume buttons Receive a call Tap the Call button Reject a call Press and hold the Call button until you hear a beep Put an active call on hold or resume a call on hold Press and hold the Call button until you hear a