Corded Telephone Model: CT310
Welcome... to your new Motorola CT310 Corded Telephone! • Recall for network functions. • Hold facility to put your caller on hold and listen to music. • Redial the last number dialled at a touch of one button. • Repeat call to alert you if you miss a call from the same number more than once. • Redial at least 8 dialled numbers for easy dialling. • 10 two-touch memory numbers for easy dialling. • Tone and Pulse dialling. • Ringer and hands-free volume control.
This user guide provides you with all the information you need to get the most from your phone. To set up your phone, follow the simple instructions in ‘Getting Started’, on the next few pages. IMPORTANT Only use the telephone line cord supplied. Got everything? • Corded handset and curly cord • Corded base • Telephone line cord ECOMOTO: a convergence of efforts by marketing, design, research, engineering and supply chain management that leads to better products for everyone.
1. Getting started......................................................................6 2. Getting to know your phone.................................................8 3. Using the phone..................................................................10 3.1 Calls................................................................................................................10 3.1.1 Make a call ...........................................................................................10 3.1.
12. Calls lists..............................................................................21 12.1 Enter the Received calls list............................................................................21 12.2 Dial a number from the Received calls list.....................................................21 12.3 Enter the Redial list.........................................................................................21 12.4 Dial a number from the Redial list...................................
1. Getting started IMPORTANT Do not place your CT310 in the bathroom or other humid areas. Location You need to place your CT310 base within 2 metres of the telephone wall socket so that the cable will reach. The socket-outlet should be installed near the equipment and should be easily accessible. Connecting the handset and base 1. Plug one end of the handset curly cord into the socket on the side of the base and the other end into the socket at the bottom of the handset. 2.
Overview of your handset A B C A Earpiece To listen to your caller. B Microphone To speak to your caller. C Curly cord socket Where you plug in your curly cord.
2. Getting to know your phone Overview of the base H A B C D E I J K L M N F G A Hook switch Hangs up a call when pressed or when you replace the handset. B Up Press to scroll up through the menu. In standby mode press to open the calls list. C Menu Press to open the menu or confirm a menu option. D Delete Press to delete an incorrect number or go back in the menu. E Memory Dial out two-touch memory numbers. F R1 Short Recall (100ms) To be used with certain network services.
H Display See below for an overview of display icons. I Volume Press to increase / decrease the volume level. J Hold Press to put your caller on hold. K Redial Press to view last number dialled out and continue pressing to scroll through stored numbers. L Down Press to scroll down through the menu. In standby mode press to open the calls list. M Hands-free Activate and deactivate the hands-free during / when making a call. N Last number redial Press to redial the last number dialled.
3. Using the phone 3.1 Calls 3.1.1 Make a call Lift the handset, when you hear the dial tone, dial the number. 3.1.2 Pre-dial 1. Enter the phone number (maximum 32 digits). If you make a mistake press the handset to dial the number. 2. Press . Lift to dial the phone number over hands-free. NOTE You can also make calls using the two touch memory keys, see page 12. 3.1.3 End a call 1. Place the handset back on the base. Or: 2. Press to end a hands-free call. 3.1.4 Receive a call 1.
3.3 Redial The last entry dialled is stored in the phone; this can be up to 32 digits long. 1. Pick up the handset and press . Or: and then 2. Press . 3. Once the call is answered lift the handset to talk. 3.4 Redial list At least the last 8 entries dialled are stored in the phone, the numbers can be up to 16 digits long. To dial a number from the Redial list 1. Press . 2. Keep pressing 3. Press and hold to scroll to the entry you want. button for 3 seconds to scroll through the numbers quickly.
4. Memory You can store ten telephone numbers in the two touch memory; the numbers can be up to 16 digits long. 4.1 Store a memory number 1. Dial the number to be stored. 2. Press . 3. Press one of the numbers on the keypad 0-9, the number is stored. 4.2 Store a number when the handset is lifted 1. Lift the handset. 2. Press . 3. Pre dial the number. 4. Press button. 5. Press one of the numbers on the keypad 0-9, the number is stored. 4.
4.6 Dial a memory number on hands-free 1. Press . 2. Press one of the keypad buttons 0-9. 3. Press . 4. The memory number will be dialled out. NOTE Remember to make a note of your memory numbers for easy reference. To change the phone number in the memory just overwrite the new number in the same location.
5. Ringtone Your CT310 has a choice of 24 ringtones and choose from 4 volume levels and crescendo. 5.1 Set the ringtone 1. Press . The current ringtone is played. 2. Press u or d to scroll to the required ringtone. A sample of the ringtone is played. 3. Press to confirm and return to standby. 5.2 Set the ringer volume 1. When the handset is on the base press , the display shows rIn9VOL and the current volume 1 - 4 or CrESC if crescendo is selected. 2.
6. Date and time If you have subscribed to a FSK type Caller ID Service, the time is set automatically when you receive your first call. If you do not have a FSK Caller ID service, you can set the date and time manually. NOTE In either case the year must be manually set. 6.1 Set the date and time 1. Press and hold 2. Press for 3 seconds, the display shows SEt 1 dAtE. to select. 3. The year will flash; scroll u or d to the correct year and press to confirm. 4.
7. Area Code You can set your local area code into the phone. When a number from that area code calls only the local number will be displayed and stored. If you then redial the number from the calls list while Auto IP is switched on, the Auto IP number will not be dialled. 7.1 Store the area code 1. Press and hold for 3 seconds, the display shows SEt 1 dAtE. 2. Scroll u or d to SEt 2 CodE. 3. Press , the display shows CodE - - - - -. 4.
8. PABX access code If the CT310 is connected to a switchboard, you may need to enter a one-digit access code in the dialling sequence to be able to connect to the outside line. The access code will be displayed at the beginning of a number on the screen. 8.1 Store the PABX access code 1. Press and hold for 3 seconds, the display shows SEt 1 dAtE. 2. Scroll u or d to SEt 3 PCOdE. 3. Press , the display shows PCOdE -. 4. The - is flashing, press u or d to scroll to the correct digit from 0 - 9. 5.
9. Auto IP Allows you to store your IP code in the phone for lower cost call charges for a long distance call. 9.1 Store a number 1. Press and hold for 3 seconds, the display shows SEt 1 dAtE. 2. Scroll u or d to SEt 4 AUTO IP. 3. Press , the display shows AUtO IP OFF. 4. Scroll u or d to On. 5. Press to confirm, the display shows InPUt COdE. 6. Using the keypad enter the IP code, e.g 17909. 7. Press to confirm. 8. Press to exit.
10. Display You can change the contrast of the display; there are 5 levels to choose from. 10.1 Change the display contrast 1. Press , the display shows LCD and the current contrast level (1-5). 2. Keep pressing Display until you see the contrast you require.
11. Set the alarm 1. Press and hold for 3 seconds, the display shows SEt 1 dAtE. 2. Scroll u or d to SEt 5 ALErt. 3. Press and the display shows 00-00 OFF. 4. Scroll u or d to set the first digit and to confirm. 5. Repeat this procedure until all digits are correct. 6. Scroll u or d to On. 7. Press to exit. NOTE To stop the alarm press any key or lift the handset. The alarm will stop automatically after 30 seconds if no button is pressed.
12. Calls lists If you have subscribed to a Caller ID service, and provided the identity of the caller is not withheld, the number of the caller will be displayed together with the date and time of the call (if provided by the network). When the list is full and a new call is received, the oldest entry will be deleted automatically. You can store at least 30 numbers in the received calls list and each number can be up to 16 digits long. NOTE If you receive a private call ---P--- will show on the display.
13. Help No dial tone • • Use only the telephone line cord supplied. Check that the telephone line cord is connected properly. Storing numbers • • Once you have stored a number there is no confirmation tone. A number cannot be deleted once stored, you can overwrite it with a new number. Memory numbers • 22 Please remember to make a record of your two touch memory numbers.
14. General information IMPORTANT This product is intended for connection to analogue public switched telephone networks and private switchboards within Singapore. Important safety instructions Follow these safety precautions when using your phone to reduce the risk of fire, electric shock, and injury to persons or property: • Do not set the phone on a heating register or over a radiator. Ensure that proper ventilation is provided at the installation site.
• There is a slight chance that your phone could be damaged by an electrical storm. We recommend that you unplug the telephone line cord during an electrical storm. Product disposal instructions Product disposal instructions for residential users When you have no further use for it, please dispose the product according to your local authority’s recycling processes. For more information, please contact your local authority or the Retailer where the product was purchased.
THESE DAMAGES MAY BE DISCLAIMED BY LAW. Some jurisdictions do not allow the limitation or exclusion of incidental or consequential damages, or limitation on the length of an implied warranty, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also have other rights that vary from one jurisdiction to another.
How to Obtain Warranty Service or Other Information? To obtain service or information, please call: (65) 68412668. Email: support@alcom.com.sg You will receive instructions on how to ship the Products or Accessories at your expense and risk, to a SUNCORP Authorized Repair Center.
Declaration of Conformity (DoC) Suncorp declares that the following products: Brandname: Motorola Type: CT310 Descriptions: Corded telephone to which this declaration related is in conformity with the essential requirements of the following directives of the Council of the European Communities: - Low voltage Directive (2006/95/EC) EMC Directive (2004/108/EC) R&TTE Directive (1999/5/EC) The products are compliant with the following standards: Safety: EN60950-1: 2006+A11:2009+A1:2010+A12:2011+A2:2013
Manufactured, distributed or sold by Suncorp Technologies Ltd., official licensee for this product. MOTOROLA and the Stylized M Logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. All other trademarks are the property of their respective owners. © 2015 Motorola Mobility LLC. All rights reserved.
