User’s Guide 5" Wi-Fi® Video Family Monitor Models: CONNECT40, CONNECT40-2, CONNECT40-3, CONNECT40-4 The features described in this User’s Guide are subject to modifications without prior notice.
Welcome... to your new Motorola Video Family Monitor ! Thank you for purchasing the Video Family Monitor. Now you can see and hear your baby sleeping in another room or you can monitor your older children in their playroom. Please retain your original dated sales receipt for your records. For warranty service of your Motorola product, you will need to provide a copy of your dated sales receipt to confirm warranty status. Registration is not required for warranty coverage.
Overview of the Parent Unit 1 2c 2b 2a 3 4 12 5 11 6 7 8 9 1. Display (LCD screen) 2. Battery status, Power, Sound level, Pairing indicators a) Lights up in blue when the Parent Unit’s battery is being charged. b) Lights up in green when the Parent Unit is switched on. c) Green-Orange-Red-Red Show the sound level detected by the Baby Unit - the louder the sound detected, the more LEDs light up. Flashes rapidly in green when the Parent Unit is searching for the Baby Unit, or is in pairing mode. 3.
Parent Unit display icons Signal Strength Camera Power Mode - AC or Battery Camera S Patrol Mode Camera Identification Number Speaker on / off Lullabies menu / mode Zoom menu / mode Night vision Alarm timer Parent unit battery status Brightness Level Speaker volume Video on timer Add camera .
Overview of Your Baby Unit (Camera) 1 2 3 4 8 5 6 10 7 1. 2. 3. 4. 5. 6. Camera Lens Microphone Mood Light Speaker Light Sensor (Night Vision Mode) Pair button Press and hold to pair with the Parent Unit. 7. Power Adapter Socket 8. Power indicatior Lights up in blue when the Baby Unit is switched on and linked to the Parent Unit. 9. Temperature Sensor 10. Power ON/OFF switch Slide to switch the Baby Unit on or off.
Table of contents 1. 2. Safety Instructions ..................................................................................... 7 Getting Started........................................................................................ 10 2.1 2.2 3. Using the Family Monitor........................................................................... 12 3.1 3.2 3.3 3.4 4. Setting Up ..................................................................................................
ENGLISH 1. Safety Instructions WARNING: Strangulation Hazard: Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3ft away). Do not remove this tag. Never use extension cords with AC Adapters. Only use the AC Adapters provided.
BABY UNIT SET UP & USE: • • • Determine a location for the Baby Unit that will provide the best view of your baby in his/her crib. Place the Baby Unit on a flat surface, such as a dresser, bureau, or shelf or mount the Unit to a wall securely using the keyhole slots in the underside of the stand. NEVER place the Baby Unit or cords within the crib.
• Connect the power adapters to easily accessible electrical outlets. CAUTION The Parent Unit includes a built-in, lithium-ion rechargeable battery pack, which is not a user-accessible item. If you think the battery needs replacing, please contact the helpline. Do not try to replace it yourself. Risk of explosion if battery is replaced by an unapproved battery type. Dispose of used batteries according to their instructions.
2. Getting Started 2.1 Power up the Baby Unit • Place the Baby unit near a suitable electrical outlet in the room where you’re going to be monitoring your baby most of the time. It should also be at least 3 feet away from your baby. • Plug the DC plug of power adapter (DC5V/1000mA) into the Baby unit, connect other end to a suitable electrical outlet. OFF switch on the side of the baby unit • Slide the Power ON up to turn it on. IMPORTANT Only use the supplied power adapter.
Charge the Parent Unit The Parent Unit comes with a built-in Li-ion battery. • Plug the micro-USB plug of power adapter (DC5V/1000mA) into the Parent unit, connect the other end to a suitable electrical outlet. • Leave to charge for 16 hours. The first time you use the Parent unit, or if you haven’t used it for long time, it’ll take 16 hours to fully charge. The battery life on a single charge lasts for 4 hours.
3. Using the Family Monitor Please read these instructions carefully, and be aware that this baby monitor is only intended as an aid. It is not a substitute for responsible adult supervision. 3.1 Setting Up • Make sure that the Baby Unit and Parent Unit are both switched on. • Place the Baby Unit in a convenient location (e.g. on a table) and point the camera lens towards the area you want to monitor.
Talk Mode ENGLISH 3.5 Press and hold the TALK button T on the parent unit to talk to your lovely baby through the baby unit’s loudspeaker. 3.6 Video ON/OFF When it is at screen On/Off mode, toggle Power On/Off button 0 to turn the LCD screen on or off, whilst still leaving the audio monitor on. 3.7 Remote Pan Scan The Family monitor and camera with pan scan to keep an eye on your child from screen, you can remotely pan scan the video image as needed. 1. Press the O button to enter scan mode. 2.
4. Parent Unit Menu Options 4.1 Adjust Speaker Volume The Parent Unit has 8 volume levels + off. To adjust volume, press the + UP or - DOWN button when the Parent Unit is in camera viewing mode. 4.2 Set the Screen Brightness The Parent Unit has 8 brightness levels. To adjust brightness, press the < LEFT or > RIGHT button when the Parent Unit is in camera viewing mode. 4.3 Audio Playlist You can playback audio content - Lullabies, Soothing Sounds and Audio Book (English only) on the Baby Unit.
• Press M button, Audio Playlist appears at the menu bar. • Scroll Up or Down to select then confirm with O button, your recording appears on the screen. • Press + UP or - DOWN button to view your personal recordings. • Press O button to play the selection. 4.3.4 Stop Playback • Press M button then scroll Up or Down to select or , confirm with O button. • Press + UP button or - DOWN button until " Press OK to stop playing" appears on screen then confirm with O button to stop. • Press M button to exit. 4.
4.5 Set Alarm You can use the Parent Unit to set an alarm as a reminder for you to take care of your baby. If an alarm time is selected, the Parent Unit will beep at the end of the selected 2, 4 or 6 hour period. To activate an alarm, proceed as follows: 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted. 3. Press the + UP button or - DOWN button to select the alarm time (6h, 4h, 2h), and the will turn on. (The default setting is Alarm OFF.
The temperature reading from the temperature sensor at the back of the Baby Unit will be displayed at the top of the Parent Unit LCD screen. You can switch temperature format between Centigrade and Fahrenheit as follows: 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT or > RIGHT button until is highlighted. 3. Press the + UP button or - DOWN button to select oC or oF. 4. Press M button to exit. 4.
4.10 View Camera If you have more than one camera paired with the Parent Unit, to select the transmission image from a specific camera, proceed as follows: 1. Press the M button and the+menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, the camera list appear on the screen. 3. Press the + UP button or - DOWN button to select the desired camera. 4. Press the O button to view the picture from that camera. Note: Only camera locations with a can be selected.
If you wish to delete the connection to a camera, proceed as follows: 1. Press the M button and the menu bar will pop up. 2. Press the < LEFT button or > RIGHT button until is highlighted, the camera list appear on the screen. 3. Press the + UP button or - DOWN button to select the camera that you wish to delete. 4. Confirm with O button. 5. Press - DOWN button to select , and then O to confirm delete. NOTE You are not allowed to delete the camera if there is only one registered camera in the system. .
5. Wi-Fi® Internet Viewing 5.1 Minimum System Requirements Android™ System • Version 7.0 or above iPhone®/iPad® iOS • Version 10.0 or above High Speed (Wi-Fi®) Internet • At least 0.6 Mbps upload bandwidth per camera (you can test your internet speed on this site: http://www.speedtest.net) 5.
5.4 User Account and Camera Setup on Android™ Devices or iPhone®/iPad® What you need • • • • Wi-Fi® Camera Unit Power adapter for the Camera Device with Android™ system version 7.0 and above Or iPhone®/iPad® with iOS version 10.0 and above • • Switch the parent unit off before connect the camera to Wi-Fi®. Connect the power adapter to mains power and insert the plug into the power socket on the back of the Camera Unit, the unit turns on. 5.4.1 Power ON and Connect the Camera 5.4.
Note: If you already have a Hubble App account, please tap Log in with Hubble to go to the next steps. 5.4.4 • • fig. 1 Add the Camera to your account Log in your Hubble Account by entering “User Name” and “Password” (fig. 3). Tap fig. 3 22 ig. 2 ig.
• • • To select your device for setting up by tapping Baby Monitoring (fig. 5). Tap COMFORT85 to add the new camera (fig. 6) . fig. 5 ig. 6 The following setup instructions will appear on the screen, select your Wi-Fi network and enter “Password” (fig. 7). (Picture A7) Power on your camera and wait for the Red LED flashing on the camera. (fig. 8) fig. 7 Wi-Fi® Internet Viewing ig.
• • • • • 24 Press and hold the PAIR button at the side of Camera, you will hear a voice prompt “Ready for Pairing” then tap Continue. (fig. 9) Tap Generate QR code on your device and hold the QR code 15 to 30 cm in front of Camera to get scanned till you will hear confirmation message “ Scanning Sucess” from your device. (fig. 10, fig. 10a) fig. 9 ffi It will take a few minutes for the Camera to connect to the Wi-Fi® network before showing the connection status (fig. 11).
• • • • ENGLISH 6. Working with PC/Notebook Go to http://www.hubbleconnected.com/motorola/login/ Enter your User Name and Password and then click Login if you have already created an account. Click on the Camera list paired in your account via Android™ device or iPhone®/iPad® and the Camera view will appear on screen. You can easily stay connected with your favorite people, places and pets with live video streaming. On the website, you can change the Settings by following the Menu instructions. 7.
8. Disposal of the Device (environment) At the end of the product’s life cycle, you should not dispose of this product with normal household waste. Take this product to a collection point for the recycling of electrical and electronic equipment. The symbol on the Product, User’s Guide and/or box indicates this. Some of the product materials can be reused if you take them to a recycling point.
ENGLISH 9. Cleaning Clean your Family Monitor with a slightly damp or anti-static cloth. Never use cleaning agents or abrasive solvents. Cleaning and care • Do not clean any part of the product with thinners or other solvents and chemicals –- this may cause permanent damage to the product which is not covered by the Warranty. • Keep your Family Monitor away from hot, humid areas or conditions, strong sunlight and avoid moisture.
10. Troubleshooting Power Indicator on the Parent Unit does not come on • Check whether the Parent Unit is powered on. • Check whether the battery is charged. • Recharge the Parent Unit by connecting it to the power supply. The Parent Unit beeps repeatedly • The Parent Unit and the Baby Unit may be out of range with each other. Reduce the distance between the units, but not closer than 3 feet. • The Baby Unit may be switched off. Slide the ON/OFF switch 0 to the On position to switch on the Baby Unit.
• The Parent Unit and the Baby Unit are too close to each other. Make sure the Parent Unit and Baby Unit are at least 3 feet away from each other. • The speaker volume of the Parent Unit may be set too high. Decrease the volume of the Parent Unit. Battery pack in the Parent Unit is running low quickly • The LCD brightness may be set too high. Try to decrease the brightness level. Refer to section 4.2 for details. • The volume level of the Parent Unit may be set too high, which consumes power.
11. General Information lf your product is not working properly.... 1. 2. 3. Read this User’s Guide or the Quick Start Guide. Visit our website: www.motorolastore.com/support Contact Customer Service at US and Canada 1-888-331-3383 Email: support@motorolastore.com To order a replacement battery pack, contact customer service.
ANY IMPLIED WARRANTIES, INCLUDING WITHOUT LIMITATION THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, SHALL BE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY, OTHERWISE THE REPAIR OR REPLACEMENT PROVIDED UNDER THIS EXPRESS LIMITED WARRANTY IS THE EXCLUSIVE REMEDY OF THE CONSUMER, AND IS PROVIDED IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED.
Products Covered Consumer Products Length of Coverage One (1) year from the date of the Products’ original purchase by the first consumer purchaser of the product. Consumer Accessories Ninety (90) days from the date of the Accessories’ original purchase by the first consumer purchaser of the product. Consumer Products and Accessories The balance of the original warranty or that are Repaired or Replaced for Ninety (90) days from the date returned to the consumer, whichever is longer.
Communication Services. Defects, damages, or the failure of Products or Accessories due to any communication service or signal you may subscribe to or use with the Products or Accessories is excluded from coverage. How to Obtain Warranty Service or Other Information? To obtain service or information, please call: US and Canada 1-888-331-3383 Email: support@motorolastore.
FCC and IC regulations FCC Part l5 NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the Federal Communications Commission (FCC) rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
The socket-outlet shall be installed near the equipment and shall be easily accessible. FCC RF Radiation Exposure Statement Caution: This Transmitter must be installed to provide a separation distance of at least 20 cm from all persons. IC Radiation Déclaration d'exposition Attention: Cet émetteur doit être installé pour fournir une distance de séparation d'au moins 20 cm de toute personne.
12. Technical Specifications Baby Unit Frequency 2402 MHz - 2477 MHz Image sensor Color CMOS 0.3M Pixels IR LED 8 pcs Operating Temperature Arange 0 °C ~ +50 °C Power Adapter BQ06A-0501000-U (Becky) Input: 100-240V AC, 50/60Hz, 300mA; Out-put: 5.0V DC, 1000mA WARNING Use only with provided power supply.
Frequency 2402 MHz - 2477 MHz Display Display colors LCD Brightness control 5" diagonal TFT LCD 16.7M color 8 steps Volume control 8 steps ENGLISH Parent Unit Operating Temperature Arange 0 °C ~ +50 °C Power Adapter BQ06A-0501000-U (Becky) Input: 100-240V AC, 50/60Hz, 300mA; Out-put: 5.0V DC, 1000mA Battery Pack LENOVO BL253(Built in) Li-ion Battery, 3.8V/2000mAh WARNING Use only the supplied power adapter. Do not use non-rechargeable batteries for the Parent Unit.
Manufactured, distributed or sold by Binatone Electronics International LTD., official licensee for this product. MOTOROLA and the Stylized M logo are trademarks or registered trademarks of Motorola Trademark Holdings, LLC. and are used under license. Apple logo and Safari are trademarks of Apple Inc., registered in the U.S. and other countries. App Store is a service mark of Apple Inc. Google Play, Android, and Chrome are trademarks of Google Inc. Wi-Fi is a trademark of the Wi-Fi Alliance.
