BLUETOOTH STEREO HEADPHONES Instruction Guide
MOTOROLA and the Stylized M Logo are registered in the US Patent & Trademark Office. The Bluetooth trademarks are owned by their proprietor and used by Motorola, Inc. under license. All other product or service names are the property of their respective owners. © Motorola, Inc. 2005. www.hellomoto.
Table of Contents Music source: Home Audio System Wirelessly Listen to Music from Your Home Audio System on a Second Home Audio System 4 Wirelessly Listen to Music from Your Home Audio System on Bluetooth® Stereo Headphones 7 Wirelessly Listen to Music from Your Home Audio System on Bluetooth® Stereo Headphones 10 Music source: MP3 Player Wirelessly Listen to Music from Your MP3 Player on Your Home Audio System 13 Wirelessly Listen to Music from Your MP3 Player on Bluetooth® Stereo Headphones Wit
Wirelessly Listen to Music from Your Home Audio System on a Second Home Audio System Requires: • Two Motorola Bluetooth® Home Stereo Adapters (DC800) * Overview The Motorola Bluetooth Home Stereo Adapter (DC800) lets you wirelessly listen to music from your home audio system on another home audio system. Note: The distance between the two home stereo adapters can be up to 300 feet. The initial setup procedure is: Connect the first home stereo adapter to your music source.
2. Connect the Line In jacks on your audio listening device to the Audio Out jacks on the second home stereo adapter. Note: The jacks on your audio listening device may be labeled Tape In or Audio-R (red) and Audio-L (white or black). Alternative: If you do not have two available Line In jacks, use the provided 3.5 mm to RCA cable to connect from the microphone jack on your audio listening device to the Audio Out jacks on the second home stereo adapter. Connect Power Supply to Home Stereo Adapter 1.
2. On the home stereo adapter connected to your music source, press and hold the pairing button for about 5 seconds until the indicator light turns on and remains steadily lit. The stereo adapter connected to the listening device is available to be found after it is turned on. When pairing is successful, the pairing button changes from steadily lit to flashing. Listen and Use Play a song on your home audio system music source.
Wirelessly Listen to Music from Your Home Audio System on Bluetooth® Stereo Headphones Requires: • Motorola Bluetooth® Home Stereo Adapter (DC800) * • Motorola Bluetooth Stereo Headphones (HT820) Overview The Motorola Bluetooth Home Stereo Adapter (DC800) lets you wirelessly listen to music from your home audio system on your Motorola Bluetooth Stereo Headphones (HT820). The initial setup procedure is: 1. Charge the battery in your stereo headphones. 2.
Connect Audio Cables The provided cables allow you to connect the audio from your home audio system to the home stereo adapter. Note: Avoid removing any existing cable connections on your home audio system. Removing them might prevent your home audio system or the home stereo adapter from functioning properly. 1. Connect the Line Out jacks on your music source to the Audio In jacks on the home stereo adapter.
Pair the Stereo Headphones and Home Stereo Adapter Note: Pairing is required only once for the initial setup. The Bluetooth devices retain the pairing information so it is easy to reconnect to the last device used after you have performed the initial pairing. 1. Make sure the stereo headphones are turned off and unplugged. If the headphones are on, press and hold the Call button for about 3 seconds until the indicator light flashes rapidly and turns off. 2.
Wirelessly Listen to Music from Your Home Audio System on Bluetooth® Stereo Headphones Requires: • Motorola Bluetooth® Home Stereo Adapter (DC800)* • Motorola Bluetooth Stereo Headphones (HT820) Overview The Motorola Bluetooth Home Stereo Adapter (DC800) lets you wirelessly listen to music from your home audio system on your Motorola Bluetooth Stereo Headphones (HT820). The initial setup procedure is: 1. Charge the battery in your stereo headphones. 2.
Connect Audio Cables The provided cables allow you to connect the audio from your home audio system to the home stereo adapter. Note: Avoid removing any existing cable connections on your home audio system. Removing them might prevent your home audio system or the home stereo adapter from functioning properly. 1. Connect the Line Out jacks on your music source to the Audio In jacks on the home stereo adapter.
Pair the Stereo Headphones and Home Stereo Adapter Note: Pairing is required only once for the initial setup. The Bluetooth devices retain the pairing information so it is easy to reconnect to the last device used after you have performed the initial pairing. 1. Make sure the stereo headphones are turned off and unplugged. If the headphones are on, press and hold the Call button for about 3 seconds until the indicator light flashes rapidly and turns off. 2.
Wirelessly Listen to Music from Your MP3 Player on Your Home Audio System Requires: • Two Motorola Bluetooth® Home Stereo Adapters (DC800) * Overview The Motorola Bluetooth Home Stereo Adapter (DC800) lets you wirelessly listen to music from your MP3 player (or other portable music device) on your home audio system speakers. The initial setup procedure is: 1. Connect the first home stereo adapter to your MP3 player (or other portable music device). 2.
2. Connect the Line In jacks on your audio listening device to the Audio Out jacks on the second home stereo adapter. Note: The jacks on your audio listening device may be labeled Tape In or Audio-R (red) and Audio-L (white or black). Alternative: If you do not have two available Line In jacks, use the provided 3.5 mm to RCA cable to connect from the microphone jack on your audio listening device to the Audio Out jacks on the second home stereo adapter. Connect Power Supply to Home Stereo Adapter 1.
2. On the home stereo adapter connected to your music source, press and hold the pairing button for about 5 seconds until the indicator light turns on and remains steadily lit. The stereo adapter connected to the listening device is available to be found after it is turned on. When pairing is successful, the pairing button changes from steadily lit to flashing. Listen and Use Play a song on your MP3 player. You should hear the music on your home audio system speakers.
Wirelessly Listen to Music from Your MP3 Player on Bluetooth® Stereo Headphones Without Missing a Call Requires: • Motorola Bluetooth® Home Stereo Adapter (DC800) * • Motorola Bluetooth Stereo Headphones (HT820) • Bluetooth-enabled mobile phone Overview The Motorola Bluetooth Home Stereo Adapter (DC800) lets you wirelessly listen to music from your MP3 player on your Motorola Bluetooth Stereo Headphones (HT820).
7. Unplug the charger from the outlet, then disconnect from the stereo headphones. Connect Audio Cables The provided cables allow you to connect the audio from your MP3 player to the home stereo adapter. 1. Connect the Line Out jacks on your music source to the Audio In jacks on the home stereo adapter. Alternative: If you do not have two available Line Out jacks, use the provided 3.5 mm to RCA cable to connect from the headphone jack on your music source to the Audio In jacks on the home stereo adapter.
4. On the home stereo adapter, press and hold the pairing button for about 5 seconds until the indicator light turns on and remains steadily lit. When pairing is successful, the pairing button on the home stereo adapter flashes rapidly and the indicator light on the headphones changes from steadily lit to flashing. Pair the Stereo Headphones and Mobile Phone Your stereo headphones can be connected to a music device and your mobile phone at the same time so you can listen to music and never miss a call. 1.
Listen and Use Play a song on your MP3 player. You should hear the music on your stereo headphones. For information on receiving calls while listening to music and using the music controls on the stereo headphones, visit www.hellomoto.com/bluetoothsupport.
Wirelessly Listen to Music from Your MP3 Player on Bluetooth® Stereo Headphones Requires: • Motorola Bluetooth® Home Stereo Adapter (DC800) * • Motorola Bluetooth Stereo Headphones (HT820) Overview The Motorola Bluetooth Home Stereo Adapter (DC800) lets you wirelessly listen to music from your home audio system on your Motorola Bluetooth Stereo Headphones (HT820). The initial setup procedure is: 1. Charge the battery in your stereo headphones. 2. Connect the home stereo adapter to your home audio system. 3.
Connect Audio Cables The provided cables allow you to connect the audio from your MP3 player to the home stereo adapter. 1. Connect the Line Out jacks on your music source to the Audio In jacks on the home stereo adapter. Alternative: If you do not have two available Line Out jacks, use the provided 3.5 mm to RCA cable to connect from the headphone jack on your music source to the Audio In jacks on the home stereo adapter. Connect Power Supply to Home Stereo Adapter 1.
4. On the home stereo adapter, press and hold the pairing button for about 5 seconds until the indicator light turns on and remains steadily lit. When pairing is successful, the pairing button on the home stereo adapter flashes rapidly and the indicator light on the headphones changes from steadily lit to flashing. Listen and Use Play a song on your MP3 player. You should hear the music on your stereo headphones.
Wirelessly Listen to Music from Your PC on Your Home Audio System Requires: • Two Motorola Bluetooth® Home Stereo Adapters (DC800) * Overview The Motorola Bluetooth Home Stereo Adapter (DC800) lets you wirelessly listen to music from your PC on your home audio system speakers. The initial setup procedure is: 1. Connect the first home stereo adapter to your PC. 2. Connect the second home stereo adapter to your home audio system. 3. Pair the home stereo adapters.
2. Connect the Line In jacks on your audio listening device to the Audio Out jacks on the second home stereo adapter. Note: The jacks on your audio listening device may be labeled Tape In or Audio-R (red) and Audio-L (white or black). Alternative: If you do not have two available Line In jacks, use the provided 3.5 mm to RCA cable to connect from the microphone jack on your audio listening device to the Audio Out jacks on the second home stereo adapter. Connect Power Supply to Home Stereo Adapter 4.
2. On the home stereo adapter connected to your music source, press and hold the pairing button for about 5 seconds until the indicator light turns on and remains steadily lit. The stereo adapter connected to the listening device is available to be found after it is turned on. When pairing is successful, the pairing button changes from steadily lit to flashing. Listen and Use Open a music program on your computer and play a song. You should hear the music on your home audio system speakers.
Wirelessly Listen to Music from Your PC on Bluetooth® Stereo Headphones Without Missing a Call Requires: • Motorola Bluetooth® Home Stereo Adapter (DC800) * • Motorola Bluetooth Stereo Headphones (HT820) • Bluetooth-enable mobile phone Overview The Motorola Bluetooth Home Stereo Adapter (DC800) lets you wirelessly listen to music from your PC on your Motorola Bluetooth Stereo Headphones (HT820).
Connect Audio Cables The provided cables allow you to connect the audio from your PC to the home stereo adapter. 1. Connect the Line Out jacks on your music source to the Audio In jacks on the home stereo adapter. Alternative: If you do not have two available Line Out jacks, use the provided 3.5 mm to RCA cable to connect from the headphone jack on your music source to the Audio In jacks on the home stereo adapter. Connect Power Supply to Home Stereo Adapter 4.
4. On the home stereo adapter, press and hold the pairing button for about 5 seconds until the indicator light turns on and remains steadily lit. When pairing is successful, the pairing button on the home stereo adapter flashes rapidly and the indicator light on the headphones changes from steadily lit to flashing. Pair the Stereo Headphones and Mobile Phone Your stereo headphones can be connected to a music device and your mobile phone at the same time so you can listen to music and never miss a call. 1.
Listen and Use Open a music program on your computer and play a song. You should hear the music on the headphones. For information on receiving calls while listening to music and using the music controls on the stereo headphones, visit www.hellomoto.com/bluetoothsupport.
Wirelessly Listen to Music from Your PC on Bluetooth® Stereo Headphones (option 1) Requires: • Motorola Bluetooth® Home Stereo Adapter (DC800) * • Motorola Bluetooth Stereo Headphones (HT820) Overview The Motorola Bluetooth Home Stereo Adapter (DC800) lets you wirelessly listen to music from your PC on your Motorola Bluetooth Stereo Headphones (HT820). The initial setup procedure is: 1. Charge the battery in your stereo headphones. 2. Connect the home stereo adapter to your PC. 3.
Connect Audio Cables The provided cables allow you to connect the audio from your PC to the home stereo adapter. 1. Connect the Line Out jacks on your music source to the Audio In jacks on the home stereo adapter. Alternative: If you do not have two available Line Out jacks, use the provided 3.5 mm to RCA cable to connect from the headphone jack on your music source to the Audio In jacks on the home stereo adapter. Connect Power Supply to Home Stereo Adapter 1.
4. On the home stereo adapter, press and hold the pairing button for about 5 seconds until the indicator light turns on and remains steadily lit. When pairing is successful, the pairing button on the home stereo adapter flashes rapidly and the indicator light on the headphones changes from steadily lit to flashing. Listen and Use Open a music program on your computer and play a song. You should hear the music on the headphones.
Wirelessly Listen to Music from Your PC on Bluetooth® Stereo Headphones (option 2) Requires: • Motorola Bluetooth® PC Stereo Adapter (PC850) • Motorola Bluetooth Stereo Headphones (HT820) Overview The Motorola Bluetooth PC Stereo Adapter (PC850) lets you wirelessly listen to music from your PC on your Motorola Bluetooth Stereo Headphones (HT820). While listening to music, the distance between the PC stereo adapter and stereo headphones can be up to 30 feet.
Install PC Stereo Adapter Hardware and Software INSTALLING THE PC STEREO ADAPTER HARDWARE AND SOFTWARE DISABLES ANY FACTORY INSTALLED BLUETOOTH HARDWARE AND SOFTWARE ON YOUR COMPUTER. DO NOT PLUG THE STEREO ADAPTER INTO YOUR COMPUTER UNTIL INSTRUCTED TO DO SO LATER IN THE INSTALLATION PROCEDURE. 1. Close all running programs on your computer and insert the stereo adapter installation CD. The installation starts automatically. If the installation does not start, find the Setup.
1. Make sure the headphones are turned off and unplugged. If the headphones are on, press and hold the Call button for about 3 seconds until the indicator light flashes rapidly and turns off. 2. On the headphones, press and hold Call button for about 6 seconds until the indicator light turns on and re mains steadily lit. 3. Right click the Bluetooth icon E at the bottom of your computer screen and select Quick Connect -> Headset -> Find Devices. A list of all Bluetooth devices found is displayed. 4.
www.hellomoto.