APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Operational or User’s Manual The manual should include instruction, installation, operator, or technical manuals with required ‘information to the users’. This manual should include a statement that cautions the user that changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Manual Front Matter (Draft) EXHIBIT D1-1
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Manual Front Matter (Draft, Continued) EXHIBIT D1-1
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Manual Front Matter (Draft, Continued) EXHIBIT D1-1
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Manual Front Matter (Draft, Continued) EXHIBIT D1-1
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Specifications (Draft) Ge neral P erform ance Mod el Num ber of C hannels Freq uency G enerati on Hx W x D W ei ght Pow er Requ irement s T3000 16 Synth esized 5.25" x 19" x 1 6.5" (13 3x483x 419mm) 40 lbs (19 kg) AC : 85-264 VAC, 4 7-63 Hz DC : 21.6 - 32 Volts DC Stan dy 0.6A , Rated Power 5 .
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Field Replaceable Units and Orderable Parts (Draft) Motorola provides the following approved accessories to improve the productivity of your base station / repeater. For a list of Motorola-approved accessories, visit the following web site: http://www.motorola.com/governmentandenterprise.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Field Replaceable Units and Orderable Parts (Draft) (Continued) MOTOTRBO MTR3000 Field Replaceable Units Model Description DLN6707_ AC/DC Power Supply DLN6719_ Station Control TCXO CLN8629 X347AF MOTOTRBO MTR3000 Installation and User CD Manual Install and User CD DLN6701_ DLN6702_ DLN6703_ DLN6704_ DLN6705_ DLN6706_ 100W PA, UHF 403–470 MHz 100W PA, UHF 470–524 MHz Exciter, UHF 403–470 MHz Exciter, UHF 450–524 MHz Receive
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Tune-Up Procedure (Draft) All adjustments are software controlled and are pre-set at the factory. Certain station operating parameters can be changed using Customer Programming Software (CPS), within predetermined limits. Examples include transmit / receiver operating frequencies and transmitter power level.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Racking Configurations (Draft) There are various equipment racking configurations available to customers. The following section depicts some of the racking alternatives. Floor-Mount Cabinet The front, side and top views for all available floor-mount cabinets are shown below.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Racking Configurations (Draft, Continued) Modular Racks The front, side and top views for all available floor-mount cabinets are shown below.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) Base Radio Module Overview The Motorola MTR3000 Base Station / Repeater (BR) provides a modular, flexible analog and digital station design for today's communication systems and of the future.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) Front Bezel LED Indicators External Connections - Electrical Connections for the base station / repeater external connectors and line cord are located on the back panel and are shown below. Location of External Connectors at Rear of Base Station / Repeater The connection to external devices on the back panel is the J7 Auxiliary System Connector.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) The locations of the connectors on the front of the station control module are shown below. Control Overview The Station Control Module (SCM) is described in this section. A general description, identification of controls, indicators, and inputs/outputs, a functional block diagram, and functional theory of operation are provided.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) and slave modes, programmable clock rate, phase, polarity, programmable word size, programmable bit ordering, and loopback. Before an SPI data transfer can take place, the SPI master (initiator) must assert the select line of the slave (target) device. The OMAP1710 is always the SPI master for MTR3000 BR.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) the MAKO codec (demodulated audio), and RX Audio is the sum of the MAKO codec output and the microphone audio. A block diagram of the audio paths follows: Ethernet Interface - Since OMAP1710 does not support a direct Ethernet interface, a bridge device is needed to support Ethernet on the SCM. The bridge device is a high performance hi-speed USB2.0 to 10/100 Ethernet controller.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) Receiver Overview The Receiver Module provides the Receiver functionality for the UHF station. The Receiver module performs highly-selective bandpass filtering and dual down-conversion of the desired RF signal.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) Specifications The following table shows the specifications of MTR3000 Base Station / Repeater’s Receiver.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) Custom Backend Receiver IC Circuitry The custom backend Receiver IC provides additional amplification, filtering, and a second downconversion. The second IF signal is converted to a digital signal, and output via either a differential or single-ended driver to the digital signal processor (DSP) in the SCM.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) Exciter Overview The Exciter Modules (in conjunction with the Power Amplifier Module) provides the transmitter functions for the station. Contained within a metal clamshell housing, the Exciter board generates a low-level modulated Radio Frequency (RF) signal which is input to the power amplifier module for further amplification and output to the transmit antenna.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) Functional Theory of Operation The following theory of operation describes the operation of the Exciter circuitry at a functional level. The information is presented to give the service technician a basic understanding of the functions performed by the module in order to facilitate maintenance and troubleshooting to the module level.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) Communications with Station Control Module Data communications between the Exciter and the Station Control Module microprocessor (μP) is performed via a Serial Peripheral Interface (SPI) bus. This bus allows the SCM μP to send data to the synthesizer PLL IC (to select frequency) and to read the ADC Converter IC.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) Power Amplifier Module Overview The Power Amplifier (PA) is a forced convection-cooled RF power amplifier. It accepts a low-level modulated RF signal from the Exciter Module, and amplifies it for transmission via the site transmit antenna port. The PA is nonlinear, and is therefore used for continuous wave (CW) applications only.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) The following table shows the specifications of MTR3000 Power Amplifier (PA). Specifications of Power Amplifier Parameter Operational Frequency Range Minimum Input Return Loss (TX mode) Rated RF Output Power Range Rated RF Input Power Range 28.6V Supply Nominal Voltage (AC Power) 14.2V Supply Nominal Voltage 28.6V Supply Maximum Current Draw 14.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) for metering purposes so that SW can monitor the PA/BR output power. Also, this voltage is provided to the power control circuitry within the PA to serve as the feedback signal in the power control loop for setting output power.
APPLICANT: MOTOROLA EQUIPMENT TYPE: ABZ89FC4823 User / Operational Manual Functional Description / Operation of Modules (Draft) Power Supply Module Overview The Power Supply is described in this section. The information provided is sufficient to give service personnel a functional understanding of the module, allowing maintenance and troubleshooting to the module level.