APPLICANT: MOTOROLA INC. EQUIPMENT TYPE: ABZ89FC4818-D INSTRUCTION MANUALS Draft copy of the of the front matter of the following instruction manual is enclosed with this submission: 68P81095E55-C .........................................................................
APPLICANT: MOTOROLA INC. EQUIPMENT TYPE: ABZ89FC4818-D TUNE-UP PROCEDURE This exhibit contains the tune-up procedure as it will appear in the Configuration Service Software (CSS) manual. The following adjustments comprise the total transmitter alignment: 1. Reference Oscillator 2. Transmitter Power Output 3. Transmit Deviation Control 4. Reference Modulation Compensation Note: All adjustments are factory pre-set and do not require alignment under normal operating conditions.
APPLICANT: MOTOROLA INC.
APPLICANT: MOTOROLA INC.
APPLICANT: MOTOROLA INC.
APPLICANT: MOTOROLA INC.
TM Digital-Capable Station For Conventional, ASTRO, 6809 Trunking, and IntelliRepeater Systems VHF Ċ 25W & 125W UHF Ċ 25W, 100W, & 110W 800 MHz Ċ 20W & 100W 900 MHz Ċ 100W PRELIMINARY Instruction Manual 68P81095E05-C
COMPUTER SOFTWARE COPYRIGHTS The Motorola products described in this instruction manual may include copyrighted Motorola computer programs stored in semiconductor memories or other media. Laws in the United States and other countries preserve for Motorola certain exclusive rights for copyrighted computer programs, including the exclusive right to copy or reproduce in any form the copyrighted computer program.
t Commercial Government and Industrial Solutions Sector Digital-Capable Station for Conventional, ASTRO, 6809 Trunking, and IntelliRepeater Systems VHF Ċ 25W & 125W UHF Ċ 25W, 100W, & 110W 800 MHz Ċ 20W & 100W 900 MHz Ċ 100W Table of Contents Model/Option Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . xi Foreword . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Mechanical Installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14 Unpacking the Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Mounting Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Stacking Cabinets . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Module Replacement Procedures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 19 General Replacement Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacing Power Amplifier Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Replacing Exciter Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Custom Receiver IC Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4 Address Decode and A/D Converter Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5 Voltage Regulator Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5 RECEIVER MODULE (900 MHz) . . . . . . . . . . . . . .
POWER AMPLIFIER MODULE (20W/100W 800 MHz; 100W 900 MHz;) . . . . . . . . . 68P81091E91 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1 General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1 Overview of Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Functional Theory of Operation (CLN7098A LED Board) . . . . . . . . . . . . . . . . . . . . . . . . . page 14 Front Panel LEDs and Switches . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14 Front Panel Connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 14 WIRELINE CIRCUITRY WIRELINE INTERFACE BOARD (4-WIRE) . . . . . . . . . . . . . . . . . . . . .
+5V Supply Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Battery Charger Control Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Reference Voltage Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Diagnostics Circuitry . . . . . . . . . . . . . . . . . . . . . . . . .
Controls, Indicators, and Inputs/Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4 Functional Theory of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5 Input Conditioning Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5 Startup Inverter Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Performance Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 3 Mounting Locations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 4 Functional Theory of Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5 TRIPLE CIRCULATOR OPTIONS VHF TRIPLE CIRCULATOR OPTION (Options X676AA-AC) . . . . . . . .
800/900 MHz DUPLEXERS (Options X182AG and X182AH) . . . . . . . . . . . . . . . . 68P81091E93 Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1 General Description . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1 Inputs/Outputs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Electrical Connections (Microwave Link) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5 Console to Microwave Station 1 Wiring Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 5 Microwave Station 2 to Station 3 Wiring Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 6 RSS Programming . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
MODEL AND OPTION SELECTION PROCEDURE (INCLUDES MODEL/OPTION COMPLEMENTS) The following equipment ordering scenario is used by the sales representative to equip a Quantar station with the proper hardware and firmware for specific system types and customerĆdefined options and feaĆ tures. The scenario is described here to explain the process and to show the structure and contents of the various options and models. 1 The sales model is T5365A (as translated from C99ED/001C).
3 The following tables show the available power and band options.
4 If no other options are selected, Motorola's Order Processing appends the appropriate stanĆ dard options (based on power and frequency band) to complete the station equipment list. The tables below show the completed equipment lists for the available options. If additional options are desired, they must be added to the initial order form. Step 5 lists the available options and the impact each has on the standard equipment configuration.
VHF OPTION X530AA SELECTED IN STEP 3 (VHF Range 1; 125W Transmitter) Source Option from Initial Sales Order Options/Kits Internally Added by Motorola Order Processing OPTION X530AB SELECTED IN STEP 3 (VHF Range 2; 125W Transmitter) Option/ Kit Description X530AB TLD3102F TKN8699A TRN7480A TRN7708A CHN6100A VHF High Band Range 2; 125W Transmitter 125 W Power Amplifier Module (VHF R2) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel AntiĆVibration/EFI Screws (2) Exci
UHF OPTION X640AK SELECTED IN STEP 3 (Quantar UHF; Range 0, 110W Transmitter) Source Option from Initial Sales Order Options/Kits Internally Added by Motorola Order Processing Option/ Kit Description X640AK CTX1146A TKN8699A TRN7480A TRN7708A CHN6100A Quantar UHF R0; 110W Transmitter 110 W Power Amplifier Module (UHF R0) PAĆtoĆExciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel AntiĆVibration/EFI Screws (2) X132AV CLX1000A CHN6100A Exciter Module (UHF, R0) Exciter Module (
UHF OPTION X640AA SELECTED IN STEP 3 (Quantar UHF; Range 1, 110W Transmitter) OPTION X240AA SELECTED IN STEP 3 (Quantar UHF; Range 1, 25W Transmitter) Source Option from Initial Sales Order Options/Kits Internally Added by Motorola Order Processing Option/ Kit Description X240AA TLE2731A TKN8699A TRN7480A TRN7708A CHN6100A Quantar UHF R1; 25W Transmitter 25 W Power Amplifier Module (UHF R1) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel AntiĆVibration/EFI Screws
UHF OPTION X640AB SELECTED IN STEP 3 (Quantar UHF; Range 2, 110W Transmitter) OPTION X240AB SELECTED IN STEP 3 (Quantar UHF; Range 2, 25W Transmitter) Source Option from Initial Sales Order Options/Kits Internally Added by Motorola Order Processing Option/ Kit Description X240AB TLE2732A TKN8699A TRN7480A TRN7708A CHN6100A Quantar UHF R2; 25W Transmitter 25 W Power Amplifier Module (UHF R2) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel AntiĆVibration/EFI Screws
UHF OPTION X640AC SELECTED IN STEP 3 (Quantar UHF; Range 3, 110W Transmitter) Source Option from Initial Sales Order Options/Kits Internally Added by Motorola Order Processing Option/ Kit OPTION X640AD SELECTED IN STEP 3 (Quantar UHF; Range 4, 100W Transmitter) Description X640AC TTE2063A TKN8699A TRN7480A TRN7708A CHN6100A Quantar UHF R3; 110W Transmitter 110 W Power Amplifier Module (UHF R3) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel AntiĆVibration/EFI Scr
800 MHz OPTION X750AA SELECTED IN STEP 3 (800 MHz Quantar; 100W Transmitter) OPTION X250AA SELECTED IN STEP 3 (800 MHz Quantar; 20W Transmitter) Source Option from Initial Sales Order Options/Kits Internally Added by Motorola Order Processing Option/ Kit Description X250AA TLF1940A TKN8699A TRN7480A TRN7708A CHN6100A Quantar 800 MHz; 20W Transmitter 20 W Power Amplifier Module (800 MHz) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel AntiĆVibration/EFI Screws (2)
900 MHz OPTION X660AA SELECTED IN STEP 3 (900 MHz; 100W Transmitter) Source Option from Initial Sales Order Options/Kits Internally Added by Motorola Order Processing Option/ Kit Description X660AA TLF1800B TKN8699A TRN7480A TRN7708A CHN6100A Quantar 900 MHz; 100W Transmitter 100 W Power Amplifier Module (900 MHz) PA-to-Exciter RF Cable Station Interconnect Board (Backplane) PA Module Front Panel AntiĆVibration/EFI Screws (2) X134AA CLF1520A CHN6100A Exciter Module (900 MHz) Exciter Module (Board a
5 The following lists available options that may be selected in addition to the standard model and options (described in Steps 1 thru 4).
Option Category Option and Complement CA00187AA Add Triple Circulator (UHF, R0) TLE9120B Dual Circulator TLN3391A 50 Ohm Load with Heat Sink TLE9140A Low Pass Filter TRN7796A Fan, Peripheral Tray X676AN Circulator X676AP Miscellaneous X676AC Add Triple Circulator (158-174 MHz) Same as X676AA except substitute TYD4003A Dual Circulator Add Triple Circulator (UHF, R1 and R2) TLE9120A Dual Circulator TLN3391A 50 Ohm Load with Heat Sink TLE9140A Low Pass Filter TRN7796A Fan, Peripheral Tray Add Triple Circ
FOREWORD Product Maintenance Philosophy Due to the high percentage of surfaceĆmount components and multi-layer circuit boards, the maintenance philosophy for this prodĆ uct is one of Field Replaceable Unit (FRU) substitution. The station is comprised of selfĆcontained modules (FRUs) which, when determined to be faulty, may be quickly and easily replaced with a known good module to bring the equipment back to normal operation.
Service and Replacement Modules Motorola System Support Center 2214 Galvin Drive Elgin, IL 60123 1-800-221-7144 Int'l 1-847-576-7300 FAX 1-847-576-2172 8/30/02 For complete information on ordering FRU replacement modules, or instructions on how to return faulty modules for repair, contact the SysĆ tem Support Center (see sidebar).
GENERAL SAFETY INFORMATION The following general safety precautions must be observed during all phases of operation, service, and repair of the equipment described in this manual. The safety precautions listed below represent warnings of certain dangers of which we are aware. You should follow these warnings and all other safety precautions necessary for the safe operation of the equipment in your operating environment.
such as type and location of antennas, as well as site accessibility of occupational personnel (controlled environĆ ment) and the general public (uncontrolled environment). This equipment should only be installed and maintained by trained technicians. Licensees of the FCC using this equipment are responsible for insuring that its installation and operation comply with FCC regulations Part 1 section 1.1310 as published in title 47 code of federal regulations.
PERFORMANCE SPECIFICATIONS General 800 851-870 MHz 900 935-941 MHz TX Sub-Band Range VHF UHF 132-154 MHz (R1) 380-433 MHz (R0) 403-433 MHz (R1) 150-174 MHz (R2) 438-470 MHz (R2) 470-494 MHz (R3) 494-520 MHz (R4) 800 806-825 MHz 900 896-902 MHz RX Sub-Band Range VHF UHF 132-154 MHz (R1) 380-433 MHz (R0) 403-433 MHz (R1) 150-174 MHz (R2) 438-470 MHz (R2) 470-494 MHz (R3) 494-520 MHz (R4) Number of Channels 16 Channel Spacing VHF: 30, 25, 12.
PERFORMANCE SPECIFICATIONS (Cont'd) Receiver VHF 21.45 MHz (1st) 450 kHz (2nd) UHF 73.35 MHz (1st) 450 kHz (2nd) Preselector Bandwidth VHF/UHF: 4 MHz 800: 19 MHz Sensitivity (12 dB SINAD) VHF: 0.25 mV UHF: 0.35 mV Sensitivity (20 dB Quieting) VHF: 0.35 mV UHF: 0.5 mV I-F Frequencies 800 900 73.35 MHz (1st) 73.35 MHz (1st) 450 kHz (2nd) 450 kHz (2nd) 900: 6 MHz 800/900: 0.30 mV 800/900: 0.42 mV Adjacent Channel Rejection VHF 90 dB (25/30 kHz) 80 dB (23.5 kHz) UHF 75 dB (12.
PERFORMANCE SPECIFICATIONS (Cont'd) Transmitter VHF 6-25W 25-125W Power Output Electronic Bandwidth UHF 5-25W 25-110W 800 5-20W 20-100W 900 25-100W Full sub-band Intermodulation Attenuation VHF: 20 dB (single circulator; standard on all PAs) 65 dB (triple circulator - requires triple circulator option) UHF: 50 dB (single circulator; standard on all PAs) 800: 50 dB (single circulator; standard on all PAs) 900: 20 dB (single circulator; standard on all PAs) 70 dB (triple circulator - requires tr