Specifications

MOTOROLA, INC. FCC ID: IHDA5ZK1
PAGE 1 OF 2
800MHZ LINEAR RF COMPENSATOR
MODEL # SYN8015A
REFERENCE SHEET
1. GENERAL
The 800 MHz Linear RF Compensator is a bi-directional RF amplifier. It is used to
compensate for signal attenuation in cellular phones due to antenna and cable losses.
The device operates in both analog (AMPS) and digital (CDMA & TDMA) modes.
2. ANTENNA INSTALLATION
IMPORTANT:
To meet the FCC’s RF Exposure Guidelines, the antenna should
be installed so there is at least 20 cm of separation between the
body of the user and nearby persons and the antenna.
3. I/O CONNECTION
Portable and antenna port: mini UHF type connectors.
DC input and various control signals: 14-pin male connector.
4. SPECIFICATIONS
Operating Frequency TX: 824-849 MHz
RX: 869-894 MHz
Channeling Single channel
Mode of Transmission Analog & Digital
Data Source External
Type of Modulation AMPS (analog)
CDMA (digital)
TDMA (digital)
Type of Information Telephony & Data
Occupied Bandwidth Requirement AMPS: 30 kHz
CDMA: 1.23 MHz
TDMA: 30 kHz
Input Power TX: 25 dBm max
RX: 3 dBm max
Output Power TX: AMPS: 28 dBm
CDMA: 29.5 dBm
TDMA: 31.2 dBm