SCIENCE Moticon SCIENCE Instruction Manual Effective August 1, 2019 PRELIMINARY
Content 03 04 05 06 07 08 09 10 12 13 15 16 17 18 19 Warning Symbols and Labeling Overview Intended Use Operation Modes System Functions Connectivity Software Setup Safety Instructions Sensor Insole Setup Data Acquisition Procedure Handling Instructions Reprocessing Environment Product Compliance Imprint Moticon SCIENCE Instruction Manual 03.00.
Warning Symbols & Labeling The following signs and symbols are used in this instruction manual, the SCIENCE Sensor Insole labeling, and the packaging labeling: Safety critical warning Safety critical warning, prohibited action Safety critical warning, mandatory action Indicates that the insctructions for use must be consulted Keep away from children Do not dispose of in your household waste (EU WEEE Directive 2012/19/EU) Device serial number Temperature range for operation / storage Humidity range for opera
Overview Model Insole3 The Moticon SCIENCE Sensor Insole is a versatile tool for sensing human foot dynamics. The sensor insole is fully integrated and highly flexible. It incoporates all technological components to execute standalone measurements. No external devices are required for data acquisition. The following table depicts the basic specifications. For more information, refer to the detailed product specifications on www.moticon.de/support.
Intended Use In the following, the terms "sensor insole" and "product" refers to an individual left / right Moticon SCIENCE Sensor Insole, as well as to a pair of sensor insoles. Intended Use Measurements may be incorrect when the product is used outside of the defined intended use. Professional use only. Always keep the product and the coin cell batteries away from children to prevent swallowing.
Operation Modes Standard Modes 1 Description Use Case Preview Transmits fixed basic sensor data wirelessly Live showcasing and activity checks in the Moticon SCIENCE Mobile App Live Transmits sensor data wirelessly to endpoint (cloud/desktop computer) Direct data transmission for storage on endpoint Record On-board sensor data recording Standalone data acquisition without smartphone Transmit Wireless sensor data transmission from on-board memory to endpoint (cloud/PC) Transmitting previously r
System Functions Function Description Firmware Update Firmware of the sensor insoles can be updated wirelessly using the Moticon SCIENCE Mobile App File Management The firmware runs a file management system on the on-board memory of the sensor insoles. Measurements can be selected, deleted and transmitted individually using the Moticon SCIENCE Mobile App System Status The firmware checks the system status and transmits status information. Status information includes: 1. Restarts 2. Active time 3.
Connectivity Moticon SCIENCE Cloud Sensor Data Measurements Moticon SCIENCE Sensor Insoles Moticon SCIENCE Desktop Software Moticon SCIENCE Mobile App WiFi or LAN connection Sensor Data / Status Settings / Control Sensor Data Sensor Data WiFi Access Point Notes For instructions of use refer to the tutorials on www.moticon.de/support. Legend Wireless data transmission. Cable bound data transmission. Moticon SCIENCE Instruction Manual 03.00.
Software Setup Moticon SCIENCE Mobile App The Moticon SCIENCE Mobile App is available for Android only! For more information, refer to the system requirements on www.moticon.de/support#faq. You need an active email address linked to a Google account to activate the mobile app. 1. Send the email address linked to your Google account to support@moticon.de. Moticon will register this email address for the closed Moticon SCIENCE user group. 2.
Safety Instructions Safety warnings for sensor insole application The sensor insole is not an orthotic. In case an orthotic is used by the wearer, the attentding doctor must be consulted about wether it can be replaced by the sensor insole. The sensor insoles must be worn only pairwise (both left and right) on order to avoid asymmetric gait. Only sensor insoles with appropriate size may be worn.
Safety Instructions Safety warnings against misuse of sensor insole Do not attempt to modify the size or shape of a sensor insole. Do not cut the sensor insoles! This is dangerous and will damage the sensors. Do not bend or twist the sensor insole, to prevent damage of electronics. The sensor insole is designed to be used inside a shoe, atypical bending or torsiioin will destroy it. Do not sting or prick the sensor insoles. Remove any sharp or spiky objects from footwear when using sensor insoles.
Sensor Insole Setup 3 4 2 + + red 1 1. Plug micro USB cable side into coin cell charger 2. Plug A-type USB cable side to 5.0V USB source green 5 3. Insert coin cell batteries in charging slots, "+" terminal outwards 4. Press reset button to start charging, red lights indicate charging 6 7 5. Green lights indicate full charge status, remove coin cell batteries from charging slots 8 6. Remove battery lid from sensor insole 7. Insert PD2032 coin cell battery 8.
Data Acquisition Procedure The following workflow describes the basic data acquisition procedure using the on-board memory of the sensor insoles to collect data. Other ways of data collection and a more detailed description of the workflow steps can be found on www.moticon.de/support. The software setup (P09) and the sensor insole setup (P12) must be completed before starting with the data acquisition procedure. Carefully read all safety instructions (P10-P11) before you begin working with the sensor insoles.
Data Acquisition Procedure 13 11 14 12 11. After returning, wait for reconnect and press "STOP" to stop the measurement 15 16 Measurements Unnamed measurement 12. Remove sensor insoles from the shoes Record 17 Analyze Report Record 18 23.07.2019 19:33:47 (0:00:01) 15. Go to "Measurements" section 16. Wait for sync and check measurement 17. Put SCIENCE Desktop Software in "Record" screen to wait for incoming data Analyze Record Analyze 13. Remove the battery lid 14.
Handling Instructions Refer to the corresponding video tutorials and documentation on www.moticon.de/support about how to carry out the below procedures. Refer to the sensor insole setup instructions (P12) for how to get ready for data acquisition. Do not bend or twist the middle part of the sensor insole when putting it into or taking it out from a shoe. Wireless connections are potentially unstable.
Reprocessing The Moticon SCIENCE Sensor Insole surface can be cleaned with desinfectants and a samp soft wipe. The sensor insole is not a sterile product. Do not spray the desinfectant on skin or feet. Pay attention to the safety instructions provided by the desinfectant manufacturer. Only use desinfectant based on the active ingredients didecyldimethylammonium chloride and ethanol. If worn by different wearers, the sensor insole must be reprocessed before it can be reused.
Environment Waste of Electrical and Electronic Equipment (WEEE) According to the WEEE Directive 2012/19/EC, electrical and electronic equipment (EEE) covered by this directive should be disposed of and collected separately and use the best available treatment, recovery and recycling techniques. It is important to collect WEEE separately from other wastes, since it contains hazardous substances to the human health and environment, and is also a valuable resource of raw materials.
Product Compliance FCC Part 15.19 Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Part 15.21 Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Imprint Legal Notice This document is the property of Moticon ReGo AG. Any reproduction of this document in part or in whole is strictly prohibited. For educational purposes only. Errors and omissions excepted and subject to change without notice. Further Information For more detailed product information, please visit www.moticon.de/insole3-overview www.moticon.de/insole3-specs www.moticon.de/support Release Notes Version Date 03.00.00 August 1, 2019 Vendor Information Moticon ReGo AG Machtlfinger Str.
EMail sales@moticon.de Web www.moticon.
