X3
Quick Start Guide Thank you for purchasing this Moticam. This camera is a delicate instrument and should be handled with care. When not in use, please store the camera in a safe place with the dust cap attached. Do not let the camera get in contact with water or expose it to extreme temperatures (below 0 or above 50 degrees Celsius). In order to receive the highest level of service, please retain your receipt as proof of purchase and register your camera online at www.motic.com today.
Using the camera on an eyepiece 1. Install the Motic Images Plus application program from the CD included. 2. Remove the Dust Cap (B) from the camera (A) and attach the focusable lens (C). 3. Choose the right size eyepiece adapter (D) and attach this to the focusable lens. 4. Attach this assembly to your microscope’s eyepiece by tightening the centering screws on the eyepiece adapter. 5. Connect to the Moticam X3 WiFi signal. Please see the instructions on page 6.
Using the camera as a Macro Camera 1. Install the Motic Images Plus application program from the CD included. 2. Remove the Dust Cap (B) from the camera (A) and attach the focusable lens (C). 3. Attach the Macro Tube (H) onto the lens 4. Place this assembly over the item you wish to view and ensure there is adequate lighting. If necessary, a desk lamp is a good solution. 5. Connect to the Moticam X3 WiFi signal. Please see the instructions on page 6.
Using the camera on a Trinocular Microscope 1. Install the Motic Images Plus application program from the CD included. 2. Remove the Dust Cap (B) from the camera (A) and attach the microscope’s C-Mount adapter (*Please note that the C-Mount adapter is specific to your microscope. For Motic microscopes, please consult the relevant Motic Accessory list and choose an appropriate adapter for your Moticam.
Connect to the Moticam X3 WiFi signal 1. Each Moticam X3 transmits its own WiFi signal to which you can directly connect your WiFi Device. 2. The Moticam X’s SSID signal name is printed on a label on the camera. To log into your camera, simply connect your WiFi device to that signal. The password for the network by default is 12345678. Using a Wifi device that operates with Android or iOS * For best performance, we recommend to use WiFi devices, such as tablets, with a screen not smaller than 7 inches.
Use the Moticam X3 on your Wifi enabled computer The Moticam X3 can also be used with Motic Images Plus software for Windows computers. If you have a WiFi enabled laptop, you can install Motic Images Plus from the CD provided. To view the camera in our product’s MI Devices interface, simply log your computer onto the Moticam X’s WiFi signal, by selecting this Wifi connection and entering the password.
FCC Statement Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.