User Manual

1.Please use a mobile phone adapter to recharge the charging bin.
You may charge via a Type-C cable connected to a computer, or other
charger with a Type-C interface.
2.The indicator light of the charging box lights up to indicate that
it is charging
To guarantee the service life of the quality earbuds, please refer to
the instructions as follows:
1.Please keep away from high temperature, high humidity and
corrosive environment.
2.Please avoid bumping, falling, bending, soaking, and etc..
3.Please do not disassemble the earbuds or charging bin.
4.Please do not overcharge for a long time, which will shorten the
service life.
5.In the case of feeling any discomfort or pain, please stop using
the product.
6.Please use certified DC 5V-1A adaptor from manufacturer under
the supervision of regulatory authorities.
Repeated charging and discharging will impair the battery
performance over time, which is normal for all rechargeable
electronic products.
Power Q25 Pro
Waterproof Wireless Sports Earbuds
Product Photo
User Manual
MFB Button Bluetooth Pairing
⸺Product Description⸺
MFB button
MFB (Multifunction button)
Left earbud Right earbud
S
M
L
Long press on the left
MFB button for 1s.
Volume +
Tap the left MFB button
for 3 times.
Last Song
Long press on the right MFB
button for 1s.
Volume -
Tap the right MFB button
for 3 times.
Next Song
Double tap the MFB button
on either side.
Music Playing/Pause
Double tap the MFB button
on either side.
Call In
When finishing a phone call,
double tap either MFB button.
Hang Up
Long press either MFB
button for 1s.
In the standby mode, tap either
MFB button for 3 times to activate
Siri voice assistant. Double tap on
both earbuds to deactivate the Siri.
Call Rejection
x
Activate/Deactivate Siri
ON/OFF switch
1.In the first time use, take the earbuds from the charging bin and peel
off the protective film. Once put into the charging bin, the earbuds will
turn off and initiate recharging automatically. When taken out from the
charging bin, the earbuds will turn on automatically.
2.After use, put the earbuds into the charging bin, and it will turn off
automatically.
How to recharge the earbuds
1. Place the earbuds into the charging bin, the earbuds will turn off and
initiate recharging automatically. During recharging, the dynamic
indicator lights on the LED display of the charging bin will be turned on.
2. Once the earbuds are fully recharged, the blue indicator lights on
the earbuds will go off.
How to recharge the charging bin Mobile phone transmission range
Packing Contents
Remarks
Why cannot I detect Bluetooth?
Why Bluetooth pairing failure?
Waterproof specification
Waterproof in daily activities (including sweating, raining, face-washing
and showering, except swimming in water, etc.)
* Note that the Bluetooth signal of mobile phones can't be transmitted
in water.
How to pair
1. Take the earbuds out of the charging bin and it will start work
automatically.
2. The red and blue lights will flash alternatively (entering pairing mode)
3. Access the Settings of mobile phone/tablet -- Bluetooth -- Search
-- Power Q25 Pro-- Pair/Connect -- Play music.
Pick up the earbuds from the charging bin to enter into the
pairing mode, with the red and blue lights flashing alternatively.
Access the Settings of mobile phone/tablet -- Bluetooth --
Search -- Power Q25 Pro-- Pairing/Connecting -- Play music.
Red and blue lights
flash alternatively
The red and blue lights
flash on one side only
Pair with PC/Laptop
Turn on the computer Settings-Devices-Bluetooth and Other Devices
- Initiate Bluetooth - Add Bluetooth or Other Devices - Search Bluetooth
- Power Q25 Pro- Pair/Connect - Play music.
Notes: If the computer has not Bluetooth function, please insert a
Bluetooth adaptor, and download a Bluetooth driver
for normal functioning.
How to reset?
Place the earbuds into the charging bin, the earbuds will turn off
and initiate charging automatically. Take the earbuds out of the
charging bin, the earbuds will turn on automatically and reset.
Version
Bluetooth support
Communication range
Frequency band
Electrical impedance
Standby time
Call time
Music playing time
Earbuds battery capacity
Host battery capacity
Charging bin recharging time
Headphone charging time
V5.1
A2DP.AVRCP.HFP.HSP.EDR
≥10m
2.402GHz-2.480GHz
32Ω±10%
120h 120
5h
5h
45mAh
500mAh
1h
1h
Above water In water
Range≤10m, signal
transmitted normally
Range≥10m, signal
interrupted
The transmission distance of the mobile phone is shown in the
following chart
1.Please avoid disassemble/reassemble the product in case of failure
or fire accident.
2.Please keep away from corrosive liquids to prevent the product from
damage.
3. Please avoid exposure to extreme temperatures below 10℃,
or above 60℃.
4.Please keep beyond the reach of kids or pets.
5.Please mind contact with sharp objects to avoid scratch.
6.Please avoid use in thundering and raining days to prevent damage or
electrical shock.
7.In the case of non-use for above a month, please charge regularly for
maintenance.
8.As the Bluetooth signal cannot transmit in water, it is not suitable for
swimming for diving.
1.The Bluetooth rang is 10m; please ensure no obstacles and
place the mobile phone close to the earbuds.
2.If the earbuds are connected to other mobile phone or devices,
please disconnect first.
3. Please reboot the Bluetooth device and reset the earbuds.
Attention
What should I do if there is no sound in the left
or right ear?
Reset the earbuds, reboot the mobile phone, delete the mobile phone
pairing record; then search and pair again. If it still fails,
please do as follows:
1.Place the two earbuds into the charging bin for recharging; maintain
the recharging status, and tap the MFB buttons of both sides for 5 times.
When the red and blue lights flash, the pairing record will be cleared
successfully.
2.Take the earbuds out of the charging bin, and in 3-5s, the earbuds
will pair automatically. You can also pair by manual mode: take the
earbuds out of the bin to initiate; when the red and blue lights flash,
tap the MFB buttons on both sides for 3 times respectively; in 3-5s,
the earbuds will pair automatically. When the red and blue lights of
one earbud flash, it indicates successful pairing of both earbuds.
3.When the red and blue lights of one earbud flash, it indicates the
state of pairing, and request for matching with the mobile phone.
4.Delete the mobile phone pairing record, search and reconnect.
Why do the earbuds turn off automatically?
Please ensure sufficient battery level. In addition, the earbuds will
automatically disconnect Bluetooth for 10mins. Place the earbuds
back to the charging bin and they will restart after recollecting.
Why cannot I recharge the charging bin?
1.Please ensure the charging cable or mobile phone charger is in a
good state and with proper connection.
2.To ensure proper connection, press the left and right earbuds to fully
connect the charging points to the charging bin.
3.The earbud charging points might be stained with dust or sweat.
When place them into the charging bin for recharging, please clean
with alcohol or cloth.
4.Please wipe the sweat on the earbuds before putting into the
charging bin, and the indicator lights will turn on.
eht egrahcer esaelp ,sraeppa ”woL yrettaB“ enot tpmorp eht ecnO.5
earbuds. When the number displayed by the LED lights on the charging
noitnetta yap esaelP .nib gnigrahc eht egrahcer esaelp ,”01“ sehcaer nib
to not using up the battery of the earbuds and charging bin, as it may
shorten the service life of the built-in lithium battery.
1. Earbuds * 2
2. Charger * 1
3. Type-C charging cable * 1
4. Earbuds cap * 2
5. User Manual * 1
In the case of any issues not specified herein, please contact
us through E-mail, and we will reply within 24 hours.
Why do the earbuds produce no sound? Or,
why does the music playing stop?
·Please check if the mobile phone is connected to two audio devices
simultaneously. Double-tap the left and right MFB buttons to disconnect.
·The Bluetooth range is 10m, please ensure no obstacles, and place the
mobile phone close to the earbuds.
·The strong environmental disturbance and magnetic field will affect
the transmission of Bluetooth signal.
·Access the mobile phone Bluetooth interface, click the pairing, delete
the pairing record and search for Bluetooth to pair again.
·You may reboot your mobile phone or reset the earbuds.
Microphone
MFB button
Indicator light
Charging point
Battery level of
left earbud
Battery level
Battery level of
right earbud
Tap for
5 times
(Press the charging end of the earbud to maintain the
charging status)
(Disconnect) (Pairing successful)
Power-off
Pairing mode
Pairing mode
Pairing successful
Product specification
·Please check the network connection of the mobile phone,
observe the Internet speed, and see if the music is still loading.
Press
Safety Precautions