M2 Asset Tracker Hardware specification guide Version 0.
Introduction M2 is a professional asset tracker leveraging multiple communication technologies and can be used in multiple logistics applications. It is developed by Zyax AB for MOST Tech Sweden AB. The device has excellent sensor measurement performance for monitoring temperature, relative humidity, ambient light level, motion detection, magnet sensors, and air pressure. The device is designed to operate in cold environments on ultralow power consumption.
Installation instructions The device comes with a double-sided adhesive tape. Please tear off the tape and gently press the device to a reliable surface. Charging The device should be charged with a 1A 5V DC USB C Charger. This charger does not come with the product. Charging is disabled in temperatures outside of 0 - 45°C (32 113°F). Operational instructions Press the button for 3 seconds until a constant green light is shown.
Regulations The device conforms to the following regulations and certifications. FCC Regulatory information This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This device complies with the Canadian ICES-003 Class B specifications. CAN ICES-3(B)/ NMB-3(B) ISED RF Exposure This device complies with ISED RSS-102 RF exposure limits set forth for an uncontrolled environment. In order to avoid the possibility of exceeding the IC RSS-102 RF exposure limits, human proximity to the antenna shall not be less than 20cm (8 inches) during normal operation.
Hardware specification Dimension 30 x 60 x 132 mm Weight 127 g single battery, 187 g double battery Operating environment -20 – 55 C, Storage environment -20 – 55 C Batteries UN38.