Manualshelf

Product Card

ManualsBrandsMortara Instrument ManualsElectronicsWireless Acquisition Module
12
MESSAGES AND INFORMATION
APPENDI X A
21
The following table describes messages that are displayed on the WAM during patient hookup and transmission.
Table of Messages
Message
Solution
Solid Green LED
No interaction required
Flashing Green LED
Replace AA battery
Solid Yellow LED
Lead fail message, check leads for proper connection
Flashing Yellow LED
Low battery and lead fail condition exist. Replace battery and check leads for proper
connection
LED Off
Power is off press power button to turn on. If no audible beeping is heard, battery is
completely depleted replace battery on power on WAM. If beeping is heard assure you
are within 3 meters of the electrocardiograph.
Following Message’s will be seen on the ELI 350 if applicable
RA or N
RA or N fail. Check if the lead wire is off or the electrode needs to be replaced.
RL or R
RL or R fail. Check if the lead wire is off or the electrode needs to be replaced.
LA or F
LA or F fail. Check if the lead wire is off or the electrode needs to be replaced.
LL or L
LL or L fail. Check if the lead wire is off or the electrode needs to be replaced.
A combination of
RA/
… /LL or N… F
More than one limb lead fail or all leads fail. Check the lead wires and electrodes.
V1 or C1
V/C1 fail. Check if the lead wire is off or the electrode needs to be replaced.
V2 or C2
V/C2 fail. Check if the lead wire is off or the electrode needs to be replaced.
V3 or C3
V/C3 fail. Check if the lead wire is off or the electrode needs to be replaced.
V4 or C4
V/C4 fail. Check if the lead wire is off or the electrode needs to be replaced.
V5 or C5
V/C5 fail. Check if the lead wire is off or the electrode needs to be replaced.
V6 or C6
V/C6 fail. Check if the lead wire is off or the electrode needs to be replaced.
A combination of
V1, V2, V3, V4, V5, V6
or
C1, C2, C3, C4, C5, C6
More than one chest lead fails. Check the lead wires and electrodes.
Note: Lead Wire messages will be seen on the ELI 350 display and not on the WAM. The WAM will display a
yellow LED in the event of a lead failure.

Summary of content (2 pages)