1. WHAT'S IN THE BOX Video Doorbell 20° Angle Mount indoor China List Tools Extension Wire Jumper for Power Adapter User Guide & Wire tuts Ind oar Chime DROVER 18) 2. MEET THE DOORBELL £b Camerawork) 5 Speakers £3 Micro USB Port © Security Screw 5 Microphones £3 Hardwired Terminals 5 Reset Holt 2x 20° Angle Mount {Optional} £5 Doorbell Button £3 Micros D Sat 5 Wall Mount Bracket <0 Doorbell Mounting Holes © LED indicator 1 Security Screw Hole {5 Mounting Screw Holes $0 Wall Mounting Screw Holes Sq.
speaker 3 LED indicator £3 Reset Button £3 USS Part (Fordable) 4. SET UP YOUR DOORBELL Almach the wires from the provided power adapter to the terminals on the rear of your doorbell, and tighten the terminal screws with screwdriver. Each wire ven be sonnet bed to Seth power terminate, The cable ponder doesn't matter. [5] Plug the adapter to your AC outlet. Install the doorbell within 30 feet of your 2.4GHz WiFi router. It Is suggested to test your doorbell prior to physical Installation.
£3 Start the WI-Fi configuration following the in-App instructions or referring to below tutorial steps.
£% LED indicator explanation: Solid Red Davies is abnormal. Flashing Red Slowly =o “Flashing Blue Quickly Ready for WiF! configuration. “3 i Flare Is upgrading. Solid Blue Successfully connected to WIFI network. Nothing Power allure/ Status ght is turned off in doorbell Settings. Fla Red Quickly Device is connecting to WiFi. Wie, SI 5. LIVE VIEW Tap ® on the Home page devices to watch live view from your doorbell.
. SETTINGS 5 Back to live view 2 Sensitivity Setting £3 Edit device name 3, &arm interval Setting £3 Receivership motion alarms 4. Alert any when peoples appear {nonfood} £3 Share device with other users & Alarm schedule £3 Device Information 6. Motion detection area setting £3 Basic function: £3 SD Card Setting . LED indicator tearjerker £3 Cloud Storage Service 2, Night vision anjofffsuto £5 Work with Amazon Echo 3.
8. HISTORY PLAYBACK Tap History to pay the videos recorded in the Micros D card. Time Line: Tilde the timeline to the left or right to latest video recordings according to rive pored. The green bar islands for video length.» The yellow dot stands for the alarm point when someones has pressed the doorbell button. © The red dot stands for the alarm point when a motion has been detected.
9. CONNECT THE CHIME & Supply prows to the chimes The chime can be powered by USB compatible power Sourceforge 14), or by the USB port on your computer. {rat indigenous) Click on BESET only once, snd you will see the Press the doorbell button, and the chime will chime indicator flashing blue, indicating that sound. If pairing Is successful, the indicator on the chime Is In pairing mode. the chive will be In solid vibe.
£4 Chime settings You can enter into the chime setting page following below sating steps, so as to une the Chime Reminder, select ringtones, adjust chime volume or unbind the connection with doorbell. Sa Bn Sop. Sep. Steps Bnp.d HOT: 1. Your doorbell communicates with the chime via Radio Frequency, but not WiFi. 2, You can assign different chimes as needed. 3.
.4 RETRO-FIT INSTALLATION (OPTIONAL) 8 your existing doorbell and mechanical sims, pi sass follow below installation steps: £ Shut off the master circuit breaker in your house. &h Bypass your indoor chime with provided jumper. in most cases, the editing doorbell roulette inks similar to the image below. Remove the cover of ths Indoor chime and loosen the “FRONT” and * TRANS” terminal’ screws. Use the provided jumper to connect the two terminals, and replace the chime cover.
#3 Replace your existing doorbell. iu wal mount screw kt Turnover the existing doorbell from | Lead the wire through the holes an | Mark the screw holes cation and mount the wall and disconnect the wires, th bracket buffers mounting. the brackets on your wall with screws. Partitive Attach the wires to the door be! Feed the wires back to the wall and Wire extension kits are optional, Mount the doorbell! to the brackets. and tighten with included tool.
40.2 HARDWIRED INSTALLATION Hardwired your doorbell with the provided DECAY power adapter, Marl the screw ho'es ‘ovation for Dirtily: @ hols on the wail snd lead the | Lead tha adapter wires through the door be installation. adapter wires out from inside. brackets and install the brackets.
11. TROUBLE SHOOTING 41: 13 the vied doorbell powers by battery? A: No, this dives doorbell reacquires constant hardwired power supply. Compared to battery powered doorbells, this wired video doorbell has more advanced features, like supporting full day recording, no delay quick response to visitor calls, and smaller in dimension, fitting into narrow door frames.
GF How many age chins can be paired with one video doorbell? AT: You can add as many wireless chimes as your wish on one video doorbell. 08: Dona it support customized Motion Detection Zones? AB: Yes it does. Go to Settings Alarm Setting Molten detection Alarm Area.