Package List

Overview and Package list

Power indicators

Type-C charging port

Touch button

Microphone

Bluetooth Pairing

1. Put the earbuds into the charging case and keep the charging case opening, then step into the

pairing mode

2. The indicator alternately flashes between orange and blue light for 1.5s under pairing mode

3. Open your Bluetooth of smartphone, refresh the Bluetooth device list, choose MOONDROP

Alice, and click pairing

Note: For the first time, please put the earbuds into the charging box, close the case lip and charge

the earbuds via USB-C port

Automatic power-on reconnection

Disconnect and there is the paired device, just open the charging case and it can achieve

automatically reconnection.

Over-distance disconnection automatic reconnection

The connected smartphone will be disconnected if beyond the effective working distance, and the

smartphone will be automatically re-connected when it reenters the effective working distance

within 3 minutes. It needs to be connected manually in the Bluetooth list if the earbuds can't be

automatically re-connected.

Disconnect the paired device

In the non-working state, long press the binaural touch button 3S to disconnect the currently

connected device. Re-enter the device pairing mode.

Restore factory settings

Open the Bluetooth paired device list, delete the paired MOONDROP Alice, then put the earbuds

into the charging case, keep the charging box opening, click both touch button 5times to clear the

pairing information, and then re-enter pairing mode.

PAGE 1
Overview and Package list Power indicators Type-C charging port Touch button Microphone Bluetooth Pairing 1. Put the earbuds into the charging case and keep the charging case opening, then step into the pairing mode 2. The indicator alternately flashes between orange and blue light for 1.5s under pairing mode 3.
PAGE 2
Prompt: Due to the connection characteristics of Bluetooth signal, there may be intermittent disconnection or silence occasionally in places with dense electromagnetic signal interference at 2.4GHZ. Charging The power of charging box < 5%, the indicator flashes once every 1.5s, goes out after 3times 5% < the power of the charging box < 25%, the LED1 flashes once every 1.5s 25%≤ the power of the charging box < 50%, the LED1 LED2 flashes once every 1.
PAGE 3
Charging time of charging case: 3H Charging time of earbuds: 1.
PAGE 4
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.