Use and Care Manual

Shake well. Now put the nib
down on a surface and slow-
ly pump the nib up and down
until the paint starts to flow
through
We recommend using on a test
surface first. Now enjoy pain-
ting!
WWW.MONTANA-CANS.COM/HOWTO
Remove the valve system.
Use your finger nail to re-
move it
4.
Screw the nib housing back
on to the right until it is tight
Use a 25ml or 180ml ACRY-
LIC color of your choice and
slowly pour the paint into the
body of the marker
6.
To Refill an ACRYLIC Marker,
unscrew the nib housing to
the left to remove it
1.
3.
2.
Once the valve system is
removed the marker is ready
to refill
5.
7.
8.
9.
Fill the marker body to three
quarters full maximum.
This ensures enough room
left to refit the valve system
Put the valve system back on
the marker and press it tight
HOW TO REFILL
A Montana ACRYLIC EMPTY MARKER