Instructions / Assembly

ank you for purchasing your heirloom quality furniture from Montana Woodworks®. Should you have
any questions or need to contact sales or support, please do not hesitate to contact our corporate oces at
888.889.3728 or via E-Mail at: [e-mail]
Tools Needed: 1/2” Wrench/Socket, Phillips or Square Screw Driver
Before beginning assembly, please take a few moments to carefully read the instructions, familiarize yourself
with the components and understand each step of the process. Likewise, please ensure that the hardware package
contains the items as described below.
Parts List: (1) Table Top Assembly, (1) Pedestal Post Assembly, (4) Wooden Legs, (4) Top Braces
Hardware List: (16) 5/16” Nuts, (16) 5/16” Washers, (8) Phillips/Square Drive Screws, (4) Leg Levelers
Assembly Instructions:
Step 1. Remove components from shipping boxes. You may lay the cardboard on the oor to prevent marring of
nish.
Step 2. Place pedestal post upright on oor. (hole locations are the same; either end up works ne!)
Step 3. Attach 4 wooden legs to the post using the 5/16” washers and nuts.
Step 4. Screw leg levelers into each leg. Ensure they are completely seated.
Step 5. Carefully turn pedestal post over so that the post is upright with legs resting on oor.
Step 6. Attach the four top braces to the pedestal post using 5/16” washers and nuts, ensuring the braces are as
ush with the top of the post as possible.
Step 7. Gently place the table top face down on a clean, non-marring surface being careful not to scratch or dent
it.
Step 8. Turn pedestal post over, carefully placing it on the table.
Step 9. Center the pedestal post on the 1” x 6” cross member attached to the table top.
Step 10. Using the 3” screws, secure the top braces to the cross member, making certain that the braces are lush
against the table cross member.
Step 11. With the assistance of another person, turn the table over. Adjust the four leg levelers until satised.
PLEASE NOTE: If you purchased your item “ready to nish” special care must be taken to properly apply a high
grade nal nish in a timely manner. Doing so will help protect your purchase from discoloration and damage
caused by exposure to ultra-violet light and/or weather. if the products intended use is outside, please use an
exterior rated nish to also protect from weather damage. See use and care instructions for further information.
Failure to adequately protect item by application and as needed, re-application of a nal nish may void warranty.
Assembly Instructions for Single Pedestal Table