User's Manual

ManualsBrandsMontage ManualsElectronicsTraxit Super 2G GPS Tracker

Confidential Preliminary – Subject to Change

 2011 Montage Asia Page 1 of 15

Product Specification

For the

TRAXIT Super 2G GPS Tracke Vehicle Tracking Device

Montage Asia

March 1, 2012

Document reference

Revision: X1.00

Author: Mr. Marcus Krieter

Proofed by: Mr. Zeev Collin

Release date: Date first printed above

File name: TRAXIT SUPER 2G GPS

TRACKER_Overview_Specification_X100_030112.docx

Authorized Recipients

Executive management as provided to and are bound by a Non-Disclosure Agreement

(NDA) in favor of Montage Asia, its parent or its agent and preventing disclosure or

misuse of the confidential information herein.

The information presented in this document is strictly confidential and contains trade

secrets and other confidential information that are the exclusive property of China Mark

Enterprise Investment Limited T/A Montage Asia, its parent, subsidiaries or agents.

Summary of content (15 pages)

PAGE 1
Confidential Preliminary – Subject to Change Product Specification For the TRAXIT Super 2G GPS Tracke Vehicle Tracking Device By Montage Asia March 1, 2012 The information presented in this document is strictly confidential and contains trade secrets and other confidential information that are the exclusive property of China Mark Enterprise Investment Limited T/A Montage Asia, its parent, subsidiaries or agents. Document reference Revision: X1.00 Author: Mr. Marcus Krieter Proofed by: Mr.
PAGE 2
Confidential Preliminary – Subject to Change Revision History Revision Date X1.0012/08/11 X1.
PAGE 3
Confidential Preliminary – Subject to Change Scope This document sets forth the basic technical requirements and feature set for the TRAXIT SUPER 2G GPS TRACKER tracking device. Description The TRAXIT SUPER 2G GPS TRACKER Tracker is a self contained, integrated commercial grade vehicle tracking device that uses GPS satellite location in combination with a quad band GPRS cellular radio connection to report that location. The TRAXIT SUPER 2G GPS TRACKER is optimized for reliability, cost and size.
PAGE 4
Confidential Preliminary – Subject to Change Electrostatic Discharge (ESD). The power input is further protected against over current with an internal self-resetting fuse. The TRAXIT SUPER 2G GPS TRACKER is physically disguised to appear to be a nondescript part of the cabling system. It is a small black box with unremarkable features. Two LED status indicators are provided to verify correct installation and initial operation.
PAGE 5
Confidential Preliminary – Subject to Change Bullet Specifications ________________________________________________________________________ Cellular: 850/1900 MHz Quad band GPRS Protocol CS-1, CS-2, CS-3 and CS-4 Output power: Class 4 (2W) @ 850MHz > 24dB @ 850MHz (OTA TRP) Class 1 (1W) @ 1900MHz > 26.5dB @ 1900MHz (OTA TRP) Sensitivity: < -107dBm @ 850MHz (Conducted) < -101dBm @ 850MHz (OTA TIS) < -106dBm @ 1900MHz (Conducted) < -103.
PAGE 6
Confidential Preliminary – Subject to Change ________________________________________________________________________ GPS: L1-band (1.57542GHz) Channels: 210 PRN 66 Search 22 Simultaneous tracking Sensitivity (UHIS): Tracking: -165dBm Reacquisition: -158dBm Acquisition: -149dBm Acquisition time: Hot: <1.5s Warm: <34s Cold: <90s Reacquisition: <1.0s WAAS: Position: <3m Velocity: >0.1m/s Acceleration: >0.
PAGE 7
Confidential Preliminary – Subject to Change ________________________________________________________________________ I/O: One main port and one internal expansion port All pins are 16V tolerant and ESD protected Pigtail: 2-Leads 2.8V GPIO 2-Leads USB2.0 Data+ Data1-Pin relay drive -500mA drive TVS overvoltage protection 1-Pin power input: 1.
PAGE 8
Confidential Software: Preliminary – Subject to Change Native ARM processor execution Proprietary application Extended AT command interface Easily configured reports to minimize data transport costs Based on proven GPRS modem stack Lockup protection: Independent watchdog with power cycle reset Flash memory: 8MB for application and data storage Report buffer USB port update Over the air update Development: Complete C language tool chain Meta Download Tool MTK Flashtool ___________________________________
PAGE 9
Confidential Preliminary – Subject to Change Shock: 25G Vibration: Sinusoidal/random  2011 Montage Asia Page 9 of 15
PAGE 10
Confidential Preliminary – Subject to Change Hardware Architecture Figure 1 shows a high level block diagram of the TRAXIT SUPER 2G GPS TRACKER system hardware. The core architecture is defined a highly integrated GPRS chipset and single chip GPS receiver. The motion detector is optionally populated at assembly time. Signal and power interface to the PCB is through a strain relieved 7 lead pigtail harness. Fewer wires may be populated as a cost reduction option at the factory at assembly time.
PAGE 11
Confidential Preliminary – Subject to Change Software Architecture The TRAXIT SUPER 2G GPS TRACKER does not use an external applications processor. Structure Figure 2 shows a high level block diagram of the basic architecture. The OS is closely knit with a debugger allowing for code development, maintenance and updates over the USB port. The boot loader provides control over all code and configuration memory.
PAGE 12
Confidential Preliminary – Subject to Change o GPS status reporting o GPS power control o Setup and monitor geographic fences  Device initiated UDP reporting o Recurring schedule event o Low battery condition o Change in GPIO state o Report record queue o User defined IP addresses o Geographic fence violation  Virtual AT command processor over SMS or a UDP/IP connection  OTA code update using TFTP o 100% buffered o Established standard protocol  Application specific I/O o Read/write digital o R
PAGE 13
Confidential Preliminary – Subject to Change Physical Attributes Figures 3A and 3B show various exterior views and dimensions of the TRAXIT SUPER 2G GPS TRACKER Tracker and some critical physical features. The top and bottom half shells are sonically welded together to provide a water resistant seal around the case perimeter. Through pressure engagement around the cable strain relief the welded enclosure also provides water resistance around the cable harness.
PAGE 14
Confidential Preliminary – Subject to Change Interfaces Electrical interface to the outside world is accomplished through a 7-lead pigtail wire harness that is retained directly by the sonically welded enclosure. Test points required for final test and provisioning are provided by port holes that are covered by the water resistant plastic label when applied. Dual LEDs provide status and are viewed through this label through clear ports where printing or silk-screening is omitted.
PAGE 15
Confidential Preliminary – Subject to Change NOTE Equivalent Circuit for GP1 and GP2 2.8V 50kΩ 1.2kΩ Lead To Circuit 2.8V GND Installation information The Tracker uses a simple cabling arrangement and supports splicing into an OBDII exten-sion for power. Connection to the vehicle is made through a 3mm pitch rectangular header con-nection common to the automotive market.