User's Manual

Monster Cable Products Inc.

Wireless MP3 adapter User guide

Setup Instructions:

The Monster model # 190075-00 Wireless MP3 adapter is your own personal FM broadcast station

intended for use inside an automobile with the Monster USB car adapter and a 12v cigarette lighter outlet.

1. Plug the Monster Wireless MP3 adapter to your Apple Ipod* MP3 player's docking connector.

2. Plug the Monster Wireless MP3 adapter's USB plug to the Monster USB car adapter.

3. Plug the Monster USB car adapter to your automobile 12v cigarette lighter outlet.

4. Note Frequency displayed on Monster Wireless MP3 adapter. Tune your auto FM radio to same

frequency.

5. Select an album on the Apple Ipod* MP3 player and push the playback button.

6. Adjust FM radio volume control to desired level.

For best results, preset the Monster MP3 adapter to FM frequencies that are not occupied by strong local

FM broadcast stations.

Note the three push buttons. Button-1 is also the "M" button. Button-2 is also the "D" button. Button-3 is

also the "S" button.

Instructions for changing frequency:

The Monster Wireless MP3 adapter contains three (3) memories for storing frequencies. To select among

any of the 3 memories, momentarily press on any of the three buttons (1, 2, or 3). For example, when

pressing button #1, the display will momentarily change to show "P1" then the operating frequency will be

displayed. When shipped from the factory, the default frequencies stored inside the memories are

88.1Mhz (Memory #1), 98.1Mhz (Memory #2), and 107.9Mhz (Memory #3). To change the default

frequencies, do the following:

1) Press the button labeled "M" and keep it pressed for a few seconds until the frequency readout begins

to flash.

2) Press the M button to increase frequency. Press the D button to decrease frequency.

3) When you have adjusted to your desired frequency, you may now save the frequency to memory. To

save the indicated frequency to Memory #1, press button-1 for at least 3 seconds until the LED's stop

flashing. To save the indicated frequency to Memory #2, press button-2 for at least 3 seconds until the

PAGE 1
Monster Cable Products Inc. Wireless MP3 adapter User guide Setup Instructions: The Monster model # 190075-00 Wireless MP3 adapter is your own personal FM broadcast station intended for use inside an automobile with the Monster USB car adapter and a 12v cigarette lighter outlet. 1. Plug the Monster Wireless MP3 adapter to your Apple Ipod* MP3 player's docking connector. 2. Plug the Monster Wireless MP3 adapter's USB plug to the Monster USB car adapter. 3.
PAGE 2
LED's stop flashing. To save the indicated frequency to Memory #3, press button-3 for at least 3 seconds until the LED's stop flashing. 4) After the displayed frequency is saved to memory, the unit will continue to operate at the selected frequency. 5) While the frequency readout is flashing, the unit will automatically go back to Memory mode after 10 seconds if you do not press any other keys during this period.