User's Manual

MT300 User Manual
一：Buttons:
“+/P1”,“-/P2” and “M/P3”
二：Operation Instruction：
(1) Insert the device to the iPod or iPhone. Make sure the iPod or iPhone is not
connected with a computer.
(2) Turn on the iPod or iPhone and play music. The device should display the
frequency for transmitting music. If the music pauses, it should display “ON”
instead, and stop transmitting.
(3) There are three preset frequency points on which the music can be transmitted.
Briefly press the“+/P1”button to set the preset frequency 1，“-/P2”for the preset
frequency 2 and“M/P3”button for frequency 3.
(4) You can set the frequency manually by :
a) pressing and holding the “MP3” button;
b) pressing“+/P1”button briefly to increase the frequency or pressing the “-/P2”
button to decrease the frequency;
c) pressing and holding the“+/P1”,“-/P2” or“M/P3”button to save the manual-set
frequency as preset1, 2, or 3. Otherwise, the device should exit from the
manual mode automatically in about 10 seconds with the frequency saved as
the current frequency and transmit music.
三：Indications:
1.When the iPod or iPhone is connected to computer, the device should indicate
“－”→“－” →“－” and then stop transmitting. When the iPod or iPhone is disconnected
from computer, the device should indicate “ON” without transmitting. When the iPod or
iPhone is playing music, the device should indicate the frequency and transmit music.
2.The device will stop transmitting when there is no sound in about 55 seconds.