Intelligent die cutting machine product manual ▍USER MANUAL MOE 2
product list Intelligent die cutting machine host Intelligent film cutting machine host - physical reference Product Parameter input ：24V 2.75A communication mode：WIFI power：66W Maximum feed size：205 size：440*210*170mm Maximum cutting size：195 suttle：4.95kg cutting accuracy：0.
Directions for use Connect the power cable to the adapter, and connect one end of the power cable to the power socket. To ensure the normal operation of the device, use 110-240 volts AC power. Connect one end of the adapter line to the power interface of the film cutting machine. After the connection is complete, press the power button to start the device.
The operation of film 1. For the first time, click "Select Language" to complete the language setting; Then click "Set WIFI" to complete the communication link. 2. Please prepare a protective be cut as shown in the picture. sure that the protective film is and complete without bending, or missing layer.
The operation 切 膜 操 作of film 3. Press the pressure bar to lift the pressure wheel, and place the protective film along the film reference line. Slowly lift the pressure lever so that the pressure wheel compacts the protective film.
The operation 切 膜 操 作of film 4. After the system starts properly, the home page is displayed 5. Enter the product model you want to cut in the search box and select a protective film. 6. Check the protective film that has been placed correctly, and click "Correct" to start cutting. The protective film will exit automatically when the cutting machine is finished. Remove the protective film and complete the film cutting.
Activate the membrane code Input the consumables verification code on the back of the protective film packaging box and click "Confirm to add" to complete the addition matters need attention Do not touch the tip of the knife with your fingers to avoid injury Placing liquid solids at the end of the year fell into the machine, causing a malfunction Do not destroy or replace the original power cable Avoid power supply damage, causing disasters When not in use, please unplug the power in time to prevent fire
FCC Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
