Quick Specs

OVERALL DIMENSIONS
ZICP360NHLHMONOGRAM 36" BUILT-IN BOTTOM-FREEZER REFRIGERATOR
Product Specification Revised 1/18
36" (91.5)
9 3/4"
(24.8)
30 1/2"
(77.5)
*73 1/4"
(186.1)
*26"
(66.0)
*34 3/4"
(88.3)
*23"
(58.4)
25 3/4" (65.4)
23 7/8" (60.7)
2 3/4"
(7.0)
*83 1/2"
(212.1)
*3 3/4"
(9.5)
*84"
(213.4)
SIDE VIEWFRONT VIEW
35" (89.0)
Case width
36 3/4"
(93.4)
TOP VIEW
ZICP360NXLH
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow 5" (12.7) min
clearance to a wall
for 90˚ door swing
** Allow
25" (63.5) min
clearance for 130˚
door swing
** These refrigerators are equipped with a 2-position door stop. The factory-set 130° door
swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted. Allow
a 15" minimum clearance to wall for pan removal. If the 90° door stop position is used, pan
access is maintained, but pan removal is restricted.
36" (91.5)
9 3/4"
(24.8)
30 1/2"
(77.5)
*73 1/4"
(186.1)
*26"
(66.0)
*34 3/4"
(88.3)
*23"
(58.4)
25 3/4" (65.4)
23 7/8" (60.7)
2 3/4"
(7.0)
*83 1/2"
(212.1)
*3 3/4"
(9.5)
*84"
(213.4)
SIDE VIEWFRONT VIEW
35" (89.0)
Case width
36 3/4"
(93.4)
TOP VIEW
ZICP360NXLH
* Shipping height. Use leveling legs and wheels for maximum
1" height adjustment from shipping height.
** Allow 5" (12.7) min
clearance to a wall
for 90˚ door swing
** Allow
25" (63.5) min
clearance for 130˚
door swing
** These refrigerators are equipped with a 2-position door stop. The factory-set 130° door
swing can be adjusted to 90° if clearances to adjacent cabinets or walls is restricted. Allow
a 15" minimum clearance to wall for pan removal. If the 90° door stop position is used, pan
access is maintained, but pan removal is restricted.
ATTENTION ELECTRICIAN:
A 115 volt 60Hz., 15 or 20 amp power
supply is required. An individual properly
grounded branch circuit or circuit breaker
is recommended. Install a properly
grounded 3-prong electrical receptacle
recessed into the back wall.
SPECIFICATIONS
Overall Width 36" (91.4 cm)
Overall Height 84" (213.4 cm)
Overall Depth 25 3/4" (64.4 cm)
Door Clearance 36 3/4" (93.4 cm)
Cutout Width 35 1/2" (90.2 cm)
Cutout Height 83 1/2" - 84 1/2"
(212.1 - 214.6 cm)
Cutout Depth 24" (61 cm)
Plumbing Requirements 1/4" OD copper
tubing or GE
SmartConnect kit
Shipping Weight 640 lb (290.3 kg)
Dimensions in parentheses are in centimeters unless otherwise noted. Actual
product dimension may vary due to manufacturing tolerances.