M O N G O O S E ® A T T I C V E N T I L A T I O N S Y S T E M Installation Catalog Attic Ventilation System www.mongooseproductsinc.com © 2011 Mongoose Products Inc.
Installation Instructions: Cap seal material 1. Venting material 9" end cap flap Fold the 9" flap under the starting edge. Press Mongoose Ridge Vent to the roof, the glue will hold Mongoose Ridge Vent to the roof shingles. 2. Roll out Mongoose Ridge Vent along ridge line of roof. There is a center line on Mongoose Ridge Vent to help you align the material with the center of the ridge. Press Mongoose Ridge Vent to the roof so that the glue strips adhere to the roof shingles. 3.
4. When finished applying Mongoose Ridge Vent, use the extra 9" cap seal material to create an end cap by folding the 9" flap under the vent material. (Mongoose Ridge Vent has 9" of extra material on both ends, it is important to tuck the extra 9" under both ends of the ridge – this creates end caps). Press Mongoose Ridge Vent to the roof, the glue will hold Mongoose Ridge Vent to the roof shingles. 6. Mongoose Ridge Vent is designed to be used with different widths of ridge caps.
Manufactured by: 115 Lismore Avenue Glenside, PA 19038 (215) 887-6600 (800) 300-9515 Made in USA www.mongooseproductsinc.com © 2011 Mongoose Products Inc.
