MonCaso 932 series Product Guide ENGLISH Please read this manual carefully before system installations. .
MonCaso 932 series product guide Manual Rev: 2.0 Release Date: November. 2008 Copyright ⓒ 2008 Moneual Inc. All Rights Reserved. No parts of this manual, including the products and software describe in it, may be reproduced, transmitted, transcribed, and stored in retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purpose, without the express written permission of Moneual Inc (Moneual).
Contents Safety information .............................................................................................. ........4 Drawing of Dismantlement ................................................................................. ........5 Package contents .......................................................................................................6 Chapter 1 – Introduction ............................................................................7 1-1. Introduction ...................
Safety information Electrical safety 1. To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. 2. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. 3. If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. Operation safety 1.
Drawing of Dismantlement (HDD 80mm Fans are optional.
Package Contents Check your MonCaso 932 series package for the following items. If any of the below items is damaged or missing, contact your retailer immediately. Item 1 Top Cover 1 HDD Cage HDD 80mm Fan (optional) Case Body Components Case Screws Q’ty Case Body 2 (2) Rear 80mm Fan 2 ODD Cage 1 Card Reader 1 Card Reader Cage 1 LCD Cover 1 S/S 7” LCD 1 Touch Panel 1 Hand Screw (#6-32 * 5) 2 Support Screws (3x5x3) 2 Washer Head Screws (3x5) 20 Screws (No.
Chapter 1. Introduction This chapter gives a general description of the MonCaso series. The chapter lists the system features including introduction on the front panel, rear panels, and internal components.
1-1. Introduction Thank you for choosing the MonCaso series Home Theater PC Case. The MonCaso 932 series will make you experience a perfect multimedia world. The MonCaso 932 series is designed to be fully compatible with the world‟s best hardware components and provides quiet computing environment with its patented airflow structure and cooling system.
5. 6-pin IEEE 1394 port: The IEEE 1394 high-speed serial bus complements USB 6. 7. by providing enhanced PC connectivity for a wide range of devices, including audio/video (A/V) appliances, storage peripherals, other PCs and portable devices. USB 2.0 port: This Universal Serial Bus 2.0 (USB 2.0) port is available for connecting USB 2.0 devices such as a mouse, printer, scanner, camera, PDA, and others. LCD touch screen: This is a 7” LCD touch screen.
1-3. Rear panel 1. Space for power supply 2. Thumbscrew: These thumbscrews secure the top cover to the chassis. 3. Motherboard I/O shield hole: Space for I/O port from motherboard 4. Air vent: Space for air flow-out. It causes system failure if you block this air vent. 5. PCI bracket: Remove bracket gently when you install graphics card or PC peripherals. 6. RGB terminal: This cable is connected to the RGB port of the graphics card. This is used for LCD touch screen display.
Chapter 2. Installation Guide This chapter provides step-by-step instruction on how to install components in the case.
2-1. Before You Begin Installation Precautions When you install and test the MonCaso 932S series system, observe all warnings and cautions in the installation instructions.
2-2. Opening the Case On the rear panel, locate the thumbscrew that secures the cover to the chassis. These are the Clamping Guides from the Top Cover. Turn the thumbscrew counterclockwise until it gets loose Pull and lift the Top Cover slightly toward the rear panel. Be careful to open and close the Top Cover. It may scratch the case.
2-3. Installing HDD To remove the HDD Cages unscrew the Flat Head screws and Washer Head screws as shown left. screw (Flat Head M3*5) screw (Washer Head M3*5) HDD Cages can be removed as shown left. (HDD 80mm Fans are optional.) Install HDDs using provided screws as shown left. (HDD 80mm Fans are optional.
2-4. Installing ODD screw (Washer Head M3*5) To remove the ODD Cage unscrew the Washer Head screws using screwdriver provided long screwdriver as shown left. Be careful to use the long screwdriver. It may scratch the front panel. Install ODD using provided screws as shown left. Remove the original ODD bezel before installing ODD and attach the ODD bezel provided as an accessory part. It is not possible to install ODD that the depth is over 170mm.
2-5. Installing Motherboard mATX Insert_ 2 Points On the base panel, locate the ATX or mATX inserts as shown left. ATX Insert_ 9 Points As there is not enough space between ODD and motherboard install ODD prior to installing motherboard.
Support Screw (M3-5-3) Fasten the 2pcs of Support Screws (M3-5-3) provided as accessory parts before installing mATX motherboard. Be sure to remove 2pcs of Support Screw when you install ATX motherboard. It may cause short. Install Motherboard using 9pcs of washer Head screws which are provided as accessory parts.
2-6. Installing Power Supply Unit PSU Vent Hole Before installing PSU, remove the PSU Guide. PSU Guide Place PSU of which the fan facing PSU vent hole on the side panel. After installing PSU fasten the PSU Guide to fix the PSU to the base panel. Use screws (#6-32*5) provided as accessory parts to install the PSU.
2-7. Cable Connection Front Panel Inside View A. Switch B/D B. Front I/O B/D C. Card Reader E. 10key B/D F. Vol. Knob B/D G. IR Receiver D. 7" LCD Module 2-8. Power S/W and LED Connection 1. Connect the S.W B/D's Power S.W cable to the iMON LCD's Power In 2Pin. 2. Connect the S.W B/D's LED cable with the motherboard's front port LED Pin. 3. Connect the iMON LCD's Power out 2Pin cable to the front port of the motherboard with the Power S.W pin.
2-9. iMON Connection Connecting the USB connectors in the wrong direction may cause damage to parts Connect the iMON Power Cable to the Power Supply's 24Pin or 20Pin Connector. After Connecting, connect the iMON LCD Power Cable's opposite connector to the motherboard's 24Pin or 20Pin connector. Connect the iMON LCD Power Cable's iMON LCD Power 4Pin Connector to the iMON LCD Main B/D's 4PinConnector. NOTE The iMON LCD Power Cable connects to a 24Pin or 20Pin Connector.
2-10. Front I/O& Card Reader Connection Front I/O Connection After determining the location of the motherboard's connector, Connect with the Front I/O in the correct direction. NOTE The location of the USB2.0 / IEEE1394 / Audio Ports can be found in the motherboard's manual. Card Reader Connection After locating the motherboard's Connector connect with the Card Reader in the correct direction. CAUTION Plugging connectors in the wrong direction can damage the parts.
2-11. RGB Terminal Connection Install a Graphic Card that support a Dual Display Using the Graphic Card's Manual as reference, connect the RGB cables for the main monitor and sub monitor (7'' LCD) to the graphics card. After installing the OS, Refer to the graphic card's manual to set up the dual display. NOTE ▪ When purchasing a Graphic Card for the 7'' LCD display, make sure to purchase one that supports multiple screens/dual display.
2-12. Attaching ODD Bezel Tape 1. After completion of Case assembly turn the power on and eject ODD 2. Remove the tape on the back side of ODD bezel provided as an accessory part. 3. Align ODD bezel and tray and attach the ODD bezel to ODD tray Remove the original ODD bezel before installing ODD and attach the ODD bezel provided as an accessory part.
2-13. Installing the wireless keyboard Wireless keyboard is optional device. Plug the USB receiver to the USB port of the front or rear panel of the MonCaso 932 system. A USB extension cable can be used to connect the USB receiver. 1. Install the keyboard batteries. 2. Press the connect button on the USB receiver. 3. Press the on/off button on the front side of keyboard. 4. Press the "Connect" key under the keyboard.
Chapter 3.
3-1. Software Installation Before installation, make sure the resolution of 7” touch screen monitor. (800x600). 1. Insert the iMON software CD into the optical drive then it will run automatically. On the screen menu, click “iMONSetup.exe”. Select “Read the contents” and click „Start Setup‟. Follow the onscreen instructions to begin the installation, when setup is completed, click OK. 2. Select Remote control, Quick Launch Application and FrontView option.
▐ Service Notice Free after-sales service for hardware of the product is guaranteed for a year. However, free-of-charge warranty does not applied to any breakage and defect caused by consumer‟s mistakes or force majeure. * Purchase in Korea After-sales Service through Lemon Service TEL: 1577-1475 Service Center Availability Monday ~ Friday Saturday Sunday and public holiday are not available.
CHINESE
MonCaso 932系列 产品指南 请在进行系统安装之前仔细阅读本手册。 CHINESE 1
MonCaso 932S系列产品指南 手册版本：2.
目录 安全信息 .................................................................................................................. 4 拆卸图示 .................................................................................................................. 5 包装内容 .................................................................................................................. 6 第 1 章 简介 ................................................................................................................. 7 1-1. 简介 ........
安全信息 电气安全 4. 要防止电击危险，请在重新定位系统之前将电源线从电源插座上拔下。 5. 当将设备加至系统或将其从系统中删除时，请确保在连接信号电线之 前拔下设备电源线。 6. 如果电源受损，请勿尝试自行修理。请联系通过认证的维修技术人员 或您的零售商。 操作安全 1. 将设备安装至系统中之前，请仔细阅读包装中随附的所有文件。 2. 在使用产品之前，请确保已正确连接所有的电线，并确定电源线没有 损坏。如果发现任何损坏，请立即联系您的经销商。 3. 要避免短路，请勿将纸夹、螺钉和订书钉靠近连接器、插槽、插座和 电路放置。 4. 避免灰尘、潮湿以及极端温度环境。请勿将产品放置在任何容易受潮 的地方。将产品置于稳固的表面上。 5.
拆卸图示 (HDD 80毫米风扇为备选部件。 CHINESE 5
包装内容 检查您的MonCaso 932S系列包装是否包含以下项目。如果发现以下任意一项受损或缺 失，请立即联系您的零售商。 项目 机箱 顶盖 机箱组件 附件 包 1 1 硬盘架 2 HDD80 毫米风扇 (备选) (2) 后端 80 毫米风扇 2 光驱架 1 读卡器 1 读卡器架 1 LCD上盖 1 S/S 7” LCD 1 触控面板 机箱零件 数量 手拧螺钉（#6-32*5） 支承螺钉（3x5x3） 凸缘螺钉（3x5） 螺钉（No.
第 1 章 简介 本章节提供了MonCaso系列 的一般性说明。 章节中列出了系统特点，包括 有关前置面板、后置面板 以及内部组件的介绍。 MonCaso 932S系列多媒体家庭影院电脑机箱 CHINESE 7
1-1. 简介 感谢您选择MonCaso系列家庭影院电脑机箱。 MonCaso 932系列将让您体验完美的多媒体世界。 MonCaso 932系列是针对完全兼容世界上最好的硬件组件而设计；它通过其专利气流结构和冷却系 统为我们提供了安静的计算环境。 其精致的外形，采用了与其他AV系统管理相匹配的高级全铝底座以及内置 7”LCD触摸屏显示的设 计，将为您的家居环境带来焕然一新感觉。 特别是，机箱随附的通用无线远程控制装置将为您的居家使用带来更多方便。 MonCaso 932S系列将为您的计算和多媒体娱乐需求提供前沿技术支持。 1-2. 前置面板 1. 系统电源按钮：按下此按钮开启系统。 2. 红外线接收器：该接收器接收来自Moneual PAD远程控制的信号。 3. 麦克风接口：此接口用于连接麦克风。 4.
5. 6针IEEE1394接口：IEEE1394高速串行母线通过为多种设备——包括音频/视频 （A/V）设备、存储外围设备、其他类型PC以及便携式设备——提供增强的PC 连接性来辅助USB的使用。 6. USB 2.0接口：此通用串行母线2.0（USB 2.0）接口可用于连接USB 2.0设备 （例如鼠标、打印机、扫描仪、照相机、PDA等）。 7. LCD触摸屏：7” LCD触摸屏。 注意 双荧幕显示卡应用于LCD触摸屏。 8. 光驱盖板：此盖板安装在光驱托盘上。请参阅第28页上有关“如何在光驱托盘 上安装盖板”的说明。 9. 光驱托盘退出按钮：按此按钮退出光驱托盘。 10. 控制按钮 - 直接按钮（MCE）：该按钮可直接启动应用程序。可以自定义。 - App.Exit（关闭当前程序）按钮：使用此按钮可退出应用程序。它相当于“AL T+F4”的作用 - 回退按钮：该按钮用于回到MCE或iMEDIAN上。 - 方向按钮：该按钮为箭头按键，用于上/下/左/右移动。 - 启动按钮：此按钮相当于键盘上的Windows图标按键。 - 菜单按钮：此按钮相当于Moneual PAD遥控器的菜单按钮。 11.
1-3. 后置面板 1. 电源开孔 2. 翼形螺钉：这些翼形螺钉用于将顶盖固定在底座上。 3. 主机板输入/输出接口防护孔： 用于主机板输入/输出接口的开孔 4. 通风孔： 用于空气流通的开孔。如果堵塞此通风孔，会导致系统出错。 5. PCI支架： 在安装显示卡或电脑外围设备时，轻轻卸下此支架。 6.
第 2 章 安装指南 本章节将逐步说明 如何在机箱中安装组件。 MonCaso 932系列多媒体家庭影院电脑机箱 CHINESE 11
2-1.
2-2.
2-3.
2-4.
2-5.
支撑螺钉（M3-5-3） 在安装mATX主机板之前， 固定作为附件提供的 两件套支承螺钉（M3-5-3）。 在安装ATX主机板时 确保卸下两件套支承螺钉。 它可能导致短路。 使用作为附件提供的 九件套凸缘螺钉 安装主机板。 CHINESE 17
2-6.
2-7. 连接电线 前面板内视图 A. 配电板 B. 前端输入/输出插板 C. 读卡器 E. 10键键盘 F. 音量旋钮插板 G. IR接收器 D. 7" LCD模块 2-8. 连接电源开关和指示灯 1. 把配电板的电源开关电缆连接至iMON LCD的2针电源接头。 2. 把配电板的LED电缆连接至主板的前置端口LED接头。 3.
2-9.
2-10. 连接前置输入/输出接口和读卡器 前端输入/输出连接 确定主板连接器的位置后，按照正确的方向连接前端输入/输出。 注意 请参见主板手册，查看USB2.
2-11.
2-12. 安装光驱盖板 胶带 1. 在完成机箱组装之后，打开电源并退出光驱。 2. 撕下作为附件提供的光驱盖板背面的胶带。 3.
2-13. 安装无线键盘 无线键盘为备选装置。 将USB接收器插入MonCaso 972系统前置面板或后置面板上的USB接口。 可使用USB延长电线连接USB接收器。 1. 安装键盘电池 2. 按USB接收器上的连接按钮。 3. 打开键盘前部的“开/关”。 4.
第 3 章 PAD远程控制 软件安装 MonCaso 932系列多媒体家庭影院电脑机箱 CHINESE 25
▪ 3-1. 软件安装 安装前请确认7”触摸屏显视器的分辨率（800×600） 4. 将iMON软件安装光盘放入光驱，使其自动运行。在屏幕菜单中，点击“iMONSetup.e xe”。 选择“Read the contents”（阅读内容），然后单击“Start Setup” （开始安装）。按照屏幕上的说明开始安装，当安装完成后，请单击“O K”（确定）。 5. 选择“Remote control”（遥控器）、“Quick Launch Application” （快速启动应用程序）和“FrontView”（前视图）选项。 建议分别选择“iMON PAD”、“Media Center (or iMEDIAN)”（媒体中心 [或iMEDIAN]）、“Automatically”（自动）。 6.
▐ 服务介绍 本产品硬件免费维护维修期限为1年。但，因消费者过失或天灾之变引起的 破损及不良除外。 * 在韩国地区购买产品时 通过柠檬服务代理维护维修 服务代表电话 : 1577-1475 服务中心工作时间 平日 周六 周日及法定公休日休息。 * 在北美、南美地区购买产品时 服务代表电话: 1-949-450-0105 服务中心工作时间: 平日09:00‾18:00 周六及法定公休日休息。 技术支援邮件: support@moneual.
28 CHINESE
