MonCaso 832 series Product Guide ENGLISH Please read this manual carefully before system installations 0 CHINESE
CHINESE 1
MonCaso 832 series product guide Manual Rev: 2.0 Release Date: November. 2008 Copyright ⓒ 2008 Moneual Inc. All Rights Reserved. No parts of this manual, including the products and software describe in it, may be reproduced, transmitted, transcribed, and stored in retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purpose, without the express written permission of Moneual Lab (Moneual).
Contents Safety information .............................................................................................. ........5 Drawing of Dismantlement ................................................................................. ........6 Package contents .......................................................................................................7 Chapter 1 – Introduction ........................................................................... 10 1-1. introduction .................
Chapter 3 – PAD Remote Control Software Installation ........................... .32 3-1. Software Installation ............................................................................................ .33 Service Notice...........................................................................................................
Safety information Electrical safety 1. To prevent electrical shock hazard, disconnect the power cable from the electrical outlet before relocating the system. 2. When adding or removing devices to or from the system, ensure that the power cables for the devices are unplugged before the signal cables are connected. 3. If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer. Operation safety 1.
Drawing of Dismantlement The specifications and package contents of product may change without prior notice to improve performance.
Package Contents Check your MonCaso 832 series package for the following items. If any of the below items is damaged or missing, contact your retailer immediately. Item Case Body Components Case Parts Q’ty Case Body 1 Top Cover 1 HDD Cage 2 Bottom 80mm Fan 1 ODD Cage 1 Card Reader 1 Hand Screw (#6-32 * 5) 2 Screw driver 1 Support Screws (3x5x3) 2 Washer Head Screws (3x5) 20 Screws (No.
Wireless keyboard 1 Wireless USB receiver 1 keyboard USB extend cable 1 (Optional) AAA battery 2 Keyboard driver CD 1 The specifications and package contents of product may change without prior notice to improve performance.
CHINESE 9
10 CHINESE
Chapter 1. Introduction This chapter gives a general description of the MonCaso series. The chapter lists the system features including introduction on the front panel, rear panels, and internal components.
1-1. Introduction Thank you for choosing the MonCaso series Home Theater PC Case. The MonCaso 832 series will make you experience a perfect multimedia world. The MonCaso 832 series is designed to be fully compatible with the world‟s best hardware components and provides quiet computing environment with its patented airflow structure and cooling system.
1-2. Front panel 1. System power button: Press this button to turn the system on. 2. DVD-Multi drive: This is a DVD-ROM/CD-RW/DVD-RW drive. 3. DVD-Multi drive tray eject button: Press this button to eject the optical drive tray. 4. LCD indicator: This displays system information. 5. Power LED: This LED lights up when you place a storage card in any of the card slots, and turn off when you remove the card. 6.
® slot: This slot is for a CompactFlash /Microdrive™ storage card. ® ® 10. Smart Media card slot: This slot is for a SmartMedia storage card. 11. 6-pin IEEE 1394 port: This port provides high-speed connectivity for IEEE1394 compliant audio/video devices, storage, peripherals, and other PC devices. 12. USB 2.0 port: This Universal Serial Bus 2.0 (USB 2.0) port is available for connecting USB 2.0 devices such as a mouse, printer, scanner, camera, PDA, and others. 13.
1-3. Rear panel 1. Space for power supply 2. Thumbscrew: These thumbscrews secure the top cover to the chassis. 3. Motherboard I/O shield hole: space for I/O port from motherboard 4. Air vent: Space for air flow-out. It causes system failure if you block this air vent. Rear 60mm fans are optional. 5. PCI bracket: Remove bracket gently when you install graphics card or PC peripherals.
1-4. LED panel 1. Media playback status: This displays media play status and input signal status for the remote control. (Play/Pause/Stop/FF/Rew/Next/Prev) 2. REP/SFL: This displays repeat/shuttle status that is set by iMEDIAN. 3. ALARM: This is displayed when a TV program reservation or ALARM function is set. If “Scheduled Power On” is set on iMON timer, also this icon is displayed when the PC power is on and off. 4. REC: This displays the TV recording status in MCE/iMEDIAN. 5.
TV – 4:3 ratio HDTV – 16:9 ratio SCR1 – 1.85:1 ratio SCR2 – 2.
18 CHINESE
Chapter 2. Installation Guide This chapter provides step-by-step instruction on how to install components in the case.
2-1. Before You Begin Installation Precautions When you install and test the MonCaso 832 series system, observe all warnings and cautions in the installation instructions.
2-2. Opening the Case On the rear panel, locate the thumbscrew that secures the cover to the chassis. Turn the thumbscrew counterclockwise until it gets loose Pull and lift the Top Cover slightly toward the rear panel.
2-3. Installing HDD To remove the HDD Cages unscrew the Flat Head screws and Washer Head screws as shown left. Be careful to open and close the Top Cover. It may scratch the case. HDD Cages can be removed as shown left. Install HDDs using provided screws as shown left.
CHINESE 23
2-4. Installing ODD To remove the ODD Cage unscrew screw (Washer Head M3*5) the Washer Head screws using screwdriver provided long screwdriver as shown left. Be careful to use the long screwdriver. It may scratch the front panel. Install ODD using provided screws as shown left. Remove the original ODD bezel before installing ODD and attach the ODD bezel provided as an accessory part. It is not possible to install ODD that the depth is over 170mm.
2-5. Installing Motherboard mATX Insert_ 2 Points On the base panel, locate the ATX or mATX inserts as shown left. ATX Insert_ 9 Points As there is not enough space between ODD and Motherboard install ODD prior to installing Motherboard. .
Support Screw (M3-5-3) Fasten the 2pcs of Support Screws (M3-5-3) provided as accessory parts before installing mATX Motherboard. Be sure to remove 2pcs of Support Screw when you install ATX Motherboard. It may cause short. Install Motherboard using 9pcs of washer Head screws which are provided as accessory parts.
PSU Vent Hole 2-6. Installing Power Supply Unit PSU Guide Before installing PSU, remove the PSU Guide. Place PSU of which the fan facing PSU vent hole on the side panel. After installing PSU fasten the PSU Guide to fix the PSU to the base panel. Use screws (#6-32*5) provided as accessory parts to install the PSU.
2-7. Cable Connection Connect 4Pin Connector of PSU to the 4Pin Connector of Power S/W&LED B‟d 2-8. Power S/W and LED Connection Be sure to connect the 4Pin connector to the correct position according to the shape of the connector housing. If not, it may cause damage to the LED.
2-9. iMON Connection iMON Power Cable Connection 1. Connect iMON Power Cable(24Pin) provided as accessory parts to the Power Connector(24Pin Connector) of PSU 2. Connect iMON Power Cable to the Power Connector of M/B(24Pin Connector) 3. Connect iMON Power Connector(3Pin) with is connected to iMON Power Cable to the iMON 3Pin Connector located at the upper right side of the Front Panel. 1. Before USB connection, be sure to check if the system power is off 2.
2-10. Front I/O and Card Reader Connection 1. Front I/O Audio Port Use HD Audio Connector in case you connect to HD M/B Use AC97 Audio Connector in case you connect to AC97 M/B IEEE 1394 Port Refer to the M/B manual to connect IEEE1394 port of M/B 2.
2-11. Attaching ODD Bezel 1. After completion of Case assembly turn the power on and eject ODD 2. Remove the tape on the back side of ODD bezel provided as an accessory part. 3.
It is not possible to install ODD that the depth is over 170mm. Be sure to check the ODD specification before purchasing ODD. 2-12. Installing the wireless keyboard (optional) Plug the USB receiver to the USB port of the front or rear panel of MonCaso 832 system. USB extension cable can be used to connect the USB receiver. ▲ Front Install the keyboard batteries. Press the connect button on the USB receiver for 1 second.
CHINESE 33
34 CHINESE
Chapter 3.
3-1. Software Installation 1. Insert the iMON software CD into the optical drive then it will run automatically. On the screen menu, click “iMONSetup.exe”. Select “Read the contents” and click „Start Setup‟. Follow the onscreen instructions to begin the installation, when setup is completed, click OK. 2. Select Remote control, Quick Launch Application and FrontView option. It is recommend to choose “iMON PAD”, “Media Center (or iMEDIAN)”, “Automatically” respectively. 3.
▐ Service Notice Free after-sales service for hardware of the product is guaranteed for a year. However, free-of-charge warranty does not applied to any breakage and defect caused by consumer‟s mistakes or force majeure. * Purchase in Korea After-sales Service through Lemon Service TEL: 1577-1475 Service Center Availability Monday ~ Friday Saturday Sunday and public holiday are not available.
MonCaso 832系列 产品指南 Chinese 请在进行系统安装之前仔细阅读本手册。 38 CHINESE
MonCaso 832系列产品指南 手册版本：2.
目录 安全信息 ............................................................. 42 拆卸图示 ............................................................. 43 包装内容 ............................................................. 44 第 1 章 简介 ........................................................... 47 1-1. 简介 ............................................................ 48 1-2. 前置面板 ........................................................ 49 1-3. 后置面板 ........................................................ 51 1-4. 指示灯面板 ..
第 3 章 PAD远程控制 软件安装 ............................................ 69 3-1. 软件安装 ........................................................
安全信息 电气安全 1. 要防止电击危险，请在重新定位系统之前将电源线从电源插座上拔下。 2. 当将设备加至系统或将其从系统中删除时 ， 请确保在连接信号电线之前拔下设 备电源线。 3. 如果电源受损 ， 请勿尝试自行修理。请联系通过认证的维修技术人员或您的零 售商。 操作安全 1. 将设备安装至系统中之前，请仔细阅读包装中随附的所有文件。 2. 在使用产品之前 ， 请确保已正确连接所有的电线 ， 并确定电源线没有损坏。如 果发现任何损坏，请立即联系您的经销商。 3. 要避免短路 ， 请勿将纸夹、螺钉和订书钉靠近连接器、插槽、插座和电路放置 。 4. 避免灰尘、潮湿以及极端温度环境。请勿将产品放置在任何容易受潮的地方。 将产品置于稳固的表面上。 5.
拆卸图示 为了提高性能，可能会变更产品技术说明以及包装内容，且不会事先通知。 CHINESE 43
包装内容 检查您的MonCaso 832系列包装是否包含以下项目。如果发现以下任意一项受损或缺失， 请立即联系您的零售商。 项目 数量 机箱 1 顶盖 1 硬盘架 2 80mm 硬盘风扇 1 光驱架 1 读卡器 1 手拧螺钉（#6-32*5） 2 螺钉起子 1 支承螺钉（3x5x3） 2 凸缘螺钉（3x5） 20 螺钉（No.
项目 无线 键盘 数量 无线键盘 1 USB 接收器 1 USB延长电线 1 AAA 电池 2 键盘驱动程序光盘 1 为了提高性能，可能会变更产品技术说明以及包装内容，且不会事先通知。 CHINESE 45
46 CHINESE
第 1 章 简介 本章节提供了MonCaso系列 的一般性说明。 章节中列出了系统特点，包括 有关前置面板、后置面板 以及内部组件的介绍。 MonCaso 832系列多媒体家庭影院电脑机箱 CHINESE 47
1-1.
1-2. 前置面板 1. 系统电源按钮：按下此按钮开启系统。 2. DVD-Multi驱动器：该设备为DVD-ROM/CD-RW/DVD-RW驱动器。 3. DVD-Multi驱动器托盘退出按钮：按下此按钮退出光驱托盘。 4. LCD指示器：该指示器将显示系统信息。 5. 电源指示灯：当存储卡插入任一读卡插槽时此指示灯将亮起，在存储卡被拔出之后此 指示灯将熄灭。 6. 读卡插槽活动（写/读）指示灯：从插入任一读卡插槽的存储卡中读取数据或向其写 入数据时，此指示灯会闪烁。 ® ® 7. Memory Stick /Memory Stick Pro™读卡插槽：此插槽用于Memory Stick /Memory Stick Pro™存储卡。 8.
® ® 9. Compact Flash /Microdrive™读卡插槽：此插槽用于CompactFlash /Microdrive™存储 卡。 ® ® 10. Smart Media 读卡插槽：此插槽用于SmartMedia 存储卡。 11. 6针IEEE1394接口：此接口为IEEE1394音频/视频设备、存储设备、外围设备以及其 他电脑设备提供了高速连接。 12. USB 2.0接口：此通用串行母线2.0（USB 2.0）接口可用于连接USB 2.0设备（例如 鼠标、打印机、照相机、PDA等）。 13. 麦克风接口：此接口用于连接麦克风。 14. 耳机接口：此接口用于连接带有立体声迷你插头的耳机。 15. 读卡插槽盖：存储卡插槽和输入/输出连接器位于前置面板盖中。 16. 开始按钮：此按钮相当于键盘上的Windows图标按键。 17. 菜单按钮：此按钮相当于MonCaso PAD遥控器的菜单按钮。 18. 方向按钮：这些箭头按键用于上/下/左/右移动。 19. 直接按钮（MCE）：该按钮将直接启用应用程序。它可以被自定义。 20.
1-3. 后置面板 1. 电源开孔 2. 翼形螺钉：这些翼形螺钉用于将顶盖固定在底座上。 3. 主机板输入/输出接口防护孔：用于主机板输入/输出接口的开孔 4. 通风孔： 用于空气流通的开孔。如果堵塞此通风孔 ， 会导致系统出错。后端60毫 米风扇为备选部件。 5.
1-4. 指示灯面板 1. 媒体回放状态：此处将显示媒体播放状态以及遥控器的输入信号状态。 （Play/Pause/Stop/FF/Rew/Next/Prev [播放/暂停播放/停止播放/快速前进播放/ 倒回播放/播放上一轨/播放下一轨]) 2. REP/SFL：此处将显示通过iMEDIAN设定的重复播放/穿梭播放的状态。 3. ALARM（警报）：当设定了TV程序预约或ALARM（警报）功能时，此处将会显示。如 果iMON定时器设定为“Scheduled Power On”（预定电源开启），则在电脑电源开启 和关闭时也会显示此图标。 4. REC（录音）：此处将显示在MCE/iMEDIAN中的TV录音状态。 5. VOL（音量）：此处将显示音量电平。 6. TIME（时间）：此处将显示媒体的消逝时间或剩余时间。 7. 文字/EQ显示：此处将以文字形式显示系统、媒体、新闻以及城市信息。但通过MCE/ iMEDIAN播放媒体时，此处将以图像形式显示。 8. 媒体类型：此处将显示MCE/iMEDIAN上的媒体类型。 9. 扬声器设定：此处将显示通过iMEDIAN设定的扬声器状态。 10.
TV – 4:3比率 HDTV – 16:9比率 SCR1 – 1.85:1比率 SCR2 – 2.
54 CHINESE
第 2 章 安装指南 本章节将逐步说明 如何在机箱中安装组件。 MonCaso 832系列多媒体家庭影院电脑机箱 CHINESE 55
2-1.
2-2.
2-3.
2-4.
2-5. 安装主机板 mATX插孔_2个 在底部面板上，有ATX或mATX插孔 （如左图所示）。 ATX插孔_9个 由于在光驱和主机板之间没有足够的空 间，请在安装主机板之前安装光驱。 Motherboard.
支承螺钉（M3-5-3） 在安装mATX主机板之前， 固定作为附件提供的 两件套支承螺钉（M3-5-3）。 在安装ATX主机板时 确保卸下两件套支承螺钉。 它可能导致短路。 使用作为附件提供的 九件套凸缘螺钉 安装主机板。 CHINESE 61
2-6.
2-7. 连接电线 2-8.
2-9. 连接iMON iMON电源线连接 1. 将作为附件提供的iMON电源线（24针）与电源装置的电源连接器 （24针连接器）连接 2. 将iMON电源线与M/B的电源连接器（24针连接器）连接 3. 将连接了iMON电源线的iMON电源连接器 （ 3针 ） 与位于前置面板右上部的 iMON 3针连接器连接。 连接iMON USB电线 1. 在连接USB之前 ， 请检查确保系统电 源关闭 2.
2-10. 连接前置输入/输出接口和读卡器 1.前置输入/输出接口 音频接口 如要连接至HD M/B，请使用HD音频连接器 如要连接至AC97 M/B，请使用AC97音频连接器 IEEE1394接口 要连接M/B的IEEE1394 接口，请参阅M/B手册 2.
2-11. 安装光驱盖板 1. 在完成机箱组装之后，打开电源并退出光驱 2. 撕下作为附件提供的光驱盖板背面的胶带。 3.
2-12.
68 CHINESE
第 3 章 PAD远程控制 软件安装 MonCaso 832系列多媒体家庭影院电脑机箱 CHINESE 69
3-1. 软件安装 1. 将iMON软件安装光盘放入光驱，使其自动运行。在屏幕菜单中，点击“iMONSet up.exe”。 选择“Read the contents”（阅读内容），然后单击“Start Setup”（开始 安装）。按照屏幕上的说明开始安装，当安装完成后，请单击“OK”（确 定）。 2. 选择“Remote control”（遥控器）、“Quick Launch Application”（快速 启动应用程序）和“FrontView”（前视图）选项。 建议分别选择“iMON PAD”、“Media Center (or iMEDIAN)”（媒体中心[或 iMEDIAN]）、“Automatically”（自动）。 3.
▐ 服务介绍 本产品硬件免费维护维修期限为1年。但，因消费者过失或天灾之变引起的 破损及不良除外。 * 在韩国地区购买产品时 通过柠檬服务代理维护维修 服务代表电话 : 1577-1475 服务中心工作时间 平日 周六 周日及法定公休日休息。 * 在北美、南美地区购买产品时 服务代表电话: 1-949-450-0105 服务中心工作时间: 平日09:00‾18:00 周六及法定公休日休息。 技术支援邮件: support@moneual.
