Parts Name Item No. Parts Images Qty. Parts Name Item No. Parts Images Qty.
1 D1 D3 D1 BB D1 D3 Please find 2 PCS of D1 and assemble them into each end of D3 by using Screws BB. This will be the Beam. We have to prepare 2 sets of beams first. 2 A1 Please assemble 2 PCS of legs(A1 )in each side of Beam by using Screws BB. We need to prepare 2 sets of this part.
3 Please assemble C1 and C2 to the part we have assembled in STEP 2 by using Screws BB like picture shows. C1 C2 BB BB C1 C2 4 C2 Please assemble those 2 parts in STEP 3 together by connecting C1 and C2 respectively.
Please assemble all G1 to G2 together. Make sure the small pole of G1 is upward. G1 G2 Please assemble all H1 to H2 together. H1 X 4 H2 I1 I2 Please assemble all I1 to I2 together, It's calld Middle pipe jacking. 6 J N Connecting the Hook(N ) to the Top Connector(J ). Attention: the Hook(N )should be under the Top Connector(J ).
7 Please find the top tube we assembled in STEP 5(H1/H2). J H2 H1 H1 H1 H2 BB And assemble this part into the Top Connector(J) with the end of H1. H2 Assemble this part into the Beam(C1/C2) with the end of H2 by using Screws BB. C1/C2 8 I1 Now we have to assemble I1/I2 which we have made in STEP 5 into the J with the side of I1. And assemble it to Beam(D3) with the side of I2 by using Screws BB Please note to assemble the part E1/E2/E3 together. This is the Slider for mosquito netting.
9 Please also connect each end (E1) of Slider to D1 by using Screws BB. E1 D1 BB D3 E1 E1 D1 D1 E2 E1 10 Please assemble G1 to J part, and please also put the small pole on the G2 into leg(A1) part as picture shows. G2 G1 E1 G1 J G1 G2 G2 A1 We have to do this step for each corner of gazebo.
11 K1 K1 K1 K1 Please assemble K1 into the end of G2. G2 K1 This is a telescopic tube. 12 O1 Please place the Big Canopy(O1) on the top frame.
13 Now we have to assemble K2 into the small part of G1. This is a telescopic tube which will be used for easy assemble of Top canopy roof. G1 K2 14 K2 O2 H2(I2) O1 K1 O1 Please use the small pockets in the middle of the canopy's edges to cover the end of pole I2. And those 4 pockets in the corner should cover the end of 4 telescopic tubes( K1 ) . Expend the canopy( O1/O2 ) to the maximum by using K1/K2.
15 Now we have to assemble the 4 legs of gazebo. You'd better ask for a helper to finish this step together. A1 A1 A1 A2 A2 A2 16 C1/C2 LL P1 E1/E2 LL Now we put the netting on the gazebo. Please place O-Rings( LL ) on 4 Beams evenly. And then put on the netting by these O-Rings Please note the netting should be on the inside of the Beams. A2 P1 And then congratulations, the assembly has finished. Fix gazebo Lower Leg Post(A2) on the ground by Stakes(II).
Sandbag 1 2 Open the bag and fill it with sand or something else heavy. Zip up the sandbag. 4 3 Place the sandbag next to the lower post. Fix the bag to the leg by velcro.