Rev_ 1.0_ EN_ DE_ FR_ ES BM01 www.momcozy.com support@momcozy.
ENGLISH
CONTENTS SAFETY INSTRUCTIONS CAUTION PACKAGE CONTENTS PRODUCT OVERVIEW GETTING STARTED 1. Charging & Powering Baby Monitor 2. Powering Camera 3. Pairing the Baby Monitor & the Camera 4. Placing the Camera 5. Wall Mounting Camera FUNCTIONS & OPERATIONS Status Icons 1. Volume Adjustment 2. Selecting a Camera & Scanning Cameras 3. Digital Zoom 4. Lullaby 5. Talk Back 6. Brightness 7. Screen Sleep 8. Add A New Camera 9. Split Screen 10. Selecting a Camera & Scanning 11. Deleting A Camera 12. Speaker Volume 13.
SAFETY INSTRUCTIONS · Strangulation Hazard—Children have STRANGLED in cords. Keep this cord out of the reach of children (more than 3 ft (0.9 m) away). Do not remove this tag. · Check the reception regularly. Test the camera before use and after changing the camera’s location. · For indoor use only. · Clean the camera with a dry cloth only. · Do not block any ventilation openings. 3 ft · NEVER place the camera or cord in or near the crib or playpen.
PRODUCT OVERVIEW Monitor 1 2 1 2 3 5 8 10 12 14 16 3 4 4 6 7 9 11 13 15 5 6 7 8 9 10 11 17 12 18 13 14 15 16 17 18 05 Power On/Off & LCD On/Off: Press and hold for 3 seconds to turn on/off the monitor. Short press: Turn on/off the LCD screen. When the screen is turned on, press and hold for 8 seconds to reset the system. Volume adjustment: Press the left button to reduce the speaker volume, and press the right button to increase the speaker volume. Menu: Press to enter/exit the menu.
Camera GETTING STARTED 1. Charging & Powering Baby Monitor 1 2 5 1) Connect the monitor adapter to the monitor and a power outlet. 2) Unplug the unit when its power indicator turns off, indicating a full charge. Unplug the unit after fully charging the monitor, which can prolong the lifespan of the device. 3 2. Powering Camera 1) Connect the camera to power source via the USB Type-C cable and camera adapter. · Only use the power adapters provided.
Step 3: 1. Press PAIR button on the rear of the camera. 2. Then the monitor will auto-pair with the camera. · Once they’re paired successfully, the camera number with icon will be shown at the top left of the screen. · It is recommended to pair in the baby's room, or wherever you intend to place the camera. · High-pitched noises might occur when the monitor is too close to the camera. Please keep them at least 1.5 m / 4.9ft apart. · The monitor can connect up to 4 cameras at once. 5.
FUNCTIONS & OPERATIONS 1. Volume Adjustment Status Icons Use Shortcut Button No Signal Press Button ->Left/Right button to quickly adjust the volume. Signal Strength Cycle Cameras Enabled ( rotate every 10 seconds) · To adjust system sound, navigate to Monitor Camera 12:08 Current Time Lullabies Enabled VOX Function on °C / °F -> -> Alarm volume. 2. Selecting a Camera & Scanning Cameras Note: Temperature Alarm This function requires more than two cameras to be turned on.
4. Lullaby 7. Screen Sleep Use Shortcut Button: Press Explanation: to enter the lullaby page. Press & This function is to set the monitor screen to sleep without powering off buttons to select the lullaby song,press & the monitor. buttons to adjust the volume of the lullaby, and press to turn on or off the lullaby. Step 1: 1. Press to enter menu page. 2. Choose -> button. 5. Talk Back Press and hold Button to talk to your baby, release it to exit the talking mode.
. Selecting a Camera & Scanning Step 2: 1. Select through -> Note: -> This function requires more than two cameras to be turned on. button. Multiple cameras are powered on and within the monitor connection range. Step 1: 1. Press Step 3: 1. Press PAIR button on the rear of the camera. 2. Then the monitor shows the camera is paired successfully. to enter menu page. 2. Select through -> -> button. 2 3 4 2 3 4 2 3 4 Step 2: 1. Select the camera you want to switch and press button.
· The monitor is paired with one camera by default, you should keep at least one camera connected. 14. VOX Explanation: 1. This function is used to wake up the monitor screen and light up. There are three wake-up levels (low/medium/high). When the sound detected by the 12. Speaker Volume Explanation: This function is used to adjust the speaker volume of the monitor. Step 1: 1. Press to enter menu page. 2.
17. Temperature Explanation: Step 2: 1. Select and set the time you want. Press to start / finish setting. stands for starting the setting. 2. stands for finishing the setting. you can set the maximum/minimum temperature and turn on the temperature alert, so that the baby monitor beeps whenever the room temperature falls outside the desired temperature range. You can also choose to display the temperature in Fahrenheit (°F) or Celsius (°C) on your monitor. Step 1: 1. Press Step 3: 1.
Step 1: 1. Press 19. Language Explanation: There are four languages available in your device, you can choose your language here. Step 1: 1. Press -> -> -> button. Step 2: 1. Select the desired language and press 22. Factory Settings button. Explanation: System will be restored to default Settings. 20. Lullabies Step 1: 1. Press Explanation: 2. Choose This function is to comfort baby with soothing lullabies. Step 1: 1. Press to enter menu page. 2. Choose -> -> button. Step 2: 1.
SPECIFICATIONS Camera Monitor Connectivity 2.4GHz FHSS Connectivity 2.4GHz FHSS Image Aspect 16�9 Image Compression H.264 Image Compression H.
TROUBLESHOOTING Product not powering on? · Check that the camera and monitor are turned on. · Check the camera and make sure it is well plugged into the outlet. · Check that the monitor is of enough battery (When the battery icon flashes red, the monitor will automatically shut off after 10 minutes). · Check whether the camera is near the monitor (recommended to keep distance within 1.5-2 m / 4.9-6.6ft). · Check whether the monitor is of low battery. Charge it in time to keep a good connection.
FCC COMPLIANCE（Camera） Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Cet émetteur radio IC : 29085-BM01A a été approuvé par Innovation, Sciences et Développement économique Canada pour fonctionner avec les types d'antenne énumérés ci-dessous, avec le gain maximal admissible indiqué. Les types d'antenne non inclus dans cette liste qui ont un gain supérieur au gain maximum indiqué pour tout type répertorié sont strictement interdits pour une utilisation avec cet appareil.
FCC COMPLIANCE（Monitor） Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
