Installation Type

Mounting Instruction / Instructions d‘installation
BINA RECESSED FRAME
25°C
Ø 16.1 / 23.94 / 31.8 / 39.7 IN,
ET 3.94 IN
0.35 - 1.26 IN
16.1 / 23.94 / 31.8 / 39.7 IN,
ET 3.94 IN
0.35 - 1.26 IN
Ø 17.0 / 24.9 / 32.76 / 40.63 IN
(432 / 632 / 832 / 1032 MM)
17.0 / 24.9 / 32.76 / 40.63 IN
(432 / 632 / 832 / 1032 MM)
2
3
1
Ø 16.1 / 23.94 / 31.8 / 39.7 IN,
ET 3.94 IN
0.35 - 1.26 IN
16.1 / 23.94 / 31.8 / 39.7 IN,
ET 3.94 IN
0.35 - 1.26 IN
4
3x / 6x
4x / 8x
5
Ø 17.0 IN 17.2 LB 17.0 IN 19.4 LB
Ø 24.9 IN 27.34 LB
24.9 IN 33.1 LB
Ø 32.76 IN 44.75 LB
32.76 IN 53.8 LB
Ø 40.63 IN 62.17 LB
40.63 IN 75.2 LB
BINA RECESSED BODY
see / voir
IP 20 EEI: A++ - A
Ø 17.0 IN = x3
Ø 24.9 IN = x3
Ø 32.76 IN = x6
Ø 40.63 IN = x6
17.0 IN = x4
24.9 IN = x4
32.76 IN = x8
40.63 IN = x8
Dry location use only!
Utiliser dans en endroit sec uniquement.
!
CAUTION! | ATTENTION!
• Do not use Base for BINA, SD, or SDI
Attention, risque de blessure/feu!
• N‘utilisez pas la Base pour BINA, SD, ou SDI
www.moltolucelighting.comMolto Luce By Ledra Brands 15774 Gateway Circle Tustin, CA 92780 PH: 714.259.9959FAX: [phone] www.moltolucelighting.comMolto Luce By Ledra Brands 15774 Gateway Circle Tustin, CA 92780 PH: 714.259.9959FAX: [phone]