W2 Series Beacon (W2) Datasheet MOKO TECHNOLOGY LIMITED www.mokosmart.
FCC ID:2AO94-W2 Note:Because the EUT is too small, Lable only be placed in the User Manual 1. Description The W2 has a ** wearable bracelet shape, waterproof construction, precise hardware, powerful firmware and touch buttons**. It has a rechargeable lithium battery and a simple USB direct charging method. iBeacon format broadcast function: positioning, advertising and marketing, personnel or material information management, etc.
Easy to print a customization logo/branding on the case. Provided with your own configuration; Customizable software, hardware and structure. OTA and DFU Supported upgrade via Over-The-Air; Nordic® official Device Firmware Upgrade(DFU); Reserved J-Link port on the board for programming. 3.
Waterproof Level IP67 - Static Current 18 - 19uA Device is power off Average Current 2.81mA At default settings③ Transmission Range - 4dBm TX power,in the open space Antenna 50ohm Ceramic Antenna Size Body size: 40.89x20.18x12mm Wearable range: 13cm~21cm Refer to mechanical draws for details Net Weight - With battery Operating Temperature -20 ~ +60ºC - Storage Temperature 20 ~ +30ºC - ②③ Default setting,0dBm TX power and 1000ms Advertising Interval. 6.
1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.