How-To Guide

You can remove devices both in the device list interface and the "More" interface.After clicking
"Remove Device" and "Confirm"，the removed device will disappear in the device list.
FAQ
1.What should I do when device configuaration
failed?
First you should check whether MQTT settings parameters are correct:
APP side you need to confirm the host,port,and the CA files（except EMQTT)
Device side you need confirm those three paremeters as well as topics
If APP side has been set the topics,the device topics must cross-corresponds to APP topics.
Second you should check the router SSID and password.
2.What is the function of button on plug?Can it
control the switch on /off?
With MOKO standard firmware，the button is only for factory reset(long press button for 10s)
and
set bluetooth broadcast on/off not the relay.
And we reserve the relay and Energy monitor chip for Customized service,thus you can develop
the switch control function or energy management if you need.