Datasheet MK11A Bluetooth Module Datasheet MK11A Bluetooth Module Datasheet MOKO TECHNOLOGY LTD. MOKO TECHNOLOGY LIMITED Version 1.1 www.mokosmart.
Contents 1. Product Instruction 1 1.1 Key Features 1 1.2 Applications 2 1.3 Product Specifications 3 2. Block Diagram 5 3. Mechanical specifications 6 3.1 Module Mechanical Dimensions 6 3.2 Recommended PCB land pads 7 4. Pin Assignment 8 5. Mounting Suggestion 10 6. Cautions 12 6.1 Reflow Soldering 12 6.2 Usage Condition Notes 13 6.3 Storage Notes 14 Revision History 14 www.mokosmart.
MK11A Bluetooth Module Datasheet 1. Product Instruction MK11A is a low-cost and low-power consumption Bluetooth® module based on Texas Instruments CC2642R SoC solution, which has a powerful 48-MHz Arm® Cortex™-M4F processor supporting Bluetooth® 5.1 Low Energy and Proprietary 2.4 GHz applications.
MK11A Bluetooth Module Datasheet 1.2 Applications • IoT • o Home automation o Sensor networks o Building automation o Industrial automation Personal area networks • o Health/fitness sensor and monitor devices o Medical devices o Key fobs and wrist watches Interactive entertainment devices o Remote controls o Gaming controllers o VR/AR • Beacons • Remote control toys • Computer peripherals and I/O devices 2 o Mouse o Keyboard o Multi-touch trackpad o Gaming www.
MK11A Bluetooth Module Datasheet 1.3 Product Specifications Detail Description Bluetooth Features Bluetooth® Low Energy Bluetooth® Mesh Direction finding(AoA) LE 1M PHY LE 2M PHY LE Coded PHY (Long Range) Advertising Extensions CSA #2 Security AES 128- and 256-bit Crypto Accelerator LE connections Concurrent central, observer, peripheral, and broadcaster roles with up to twenty concurrent connections along with one observer and one broadcaster Low Power Active-Mode RX 6.
MK11A Bluetooth Module Datasheet Detail Description Hardware Peripherals 2× UART 2× SSI (SPI, MICROWIRE, TI) I2C I2S 8 x 12bit ADC, 200k Samples/s, 8 channels 4x 32bit or 8x16bit general-purpose timers Programmable current source 30 GPIOs 2× DAC (1× continuous time, 1× ultra-low power) Real-Time Clock (RTC) ECC and RSA Public Key Hardware Accelerator SHA2 Accelerator (Full suite up to SHA-512) True Random Number Generator (TRNG) Capacitive sensing, up to 8 channels Integrated temperature and battery moni
MK11A Bluetooth Module Datasheet 2. Block Diagram 5 www.mokosmart.
MK11A Bluetooth Module Datasheet 3. Mechanical specifications 3.1 Module Mechanical Dimensions 6 Symbol Min. Typ. Max. Length -0.2mm 25mm +0.2mm Width -0.2mm 17mm +0.2mm Height (PCB only) -0.08mm 0.8mm +0.08mm Height (with shield) -0.15mm 2.8mm +0.1mm www.mokosmart.
MK11A Bluetooth Module Datasheet 3.2 Recommended PCB land pads MK11A PCB land pads (TOP View) 7 Symbol Typ. Pad (Bottom) 0.75mm x 1.00mm Diameter of Half-hole 0.55mm www.mokosmart.
MK11A Bluetooth Module Datasheet 4. Pin Assignment MK11A module pin diagram (Rear View) 8 Pin No.
MK11A Bluetooth Module Datasheet Pin No.
MK11A Bluetooth Module Datasheet 5. Mounting Suggestion You can refer to the following references for the mounting design of MK11A. Recommended module mounting example: • Please do not place any metal components in blue shaded space (*1), such as signal line and metal chassis as possible except for main board while mounting the components in *1 space on the main board is allowed except for no copper plating area (*2). • (*2) This area is routing prohibited area on the main board.
MK11A Bluetooth Module Datasheet Other module mounting examples: Placement of resin or plastic parts: Placement of metal parts • Minimum safe distance for metal parts without seriously compromising the antenna (tuning) is 40 mm top/bottom and 30 mm left or right. • Metal close to the module antenna (bottom, top, left, right, any direction) will have degradation on the antenna performance.
MK11A Bluetooth Module Datasheet 6. Cautions 6.1 Reflow Soldering Reflow soldering is a vitally important step in the SMT process. The temperature curve associated with the reflow is an essential parameter to control to ensure the correct connection of parts. The parameters of certain components will also directly impact the temperature curve selected for this step in the process.
MK11A Bluetooth Module Datasheet Example of MOKO SMT reflow soldering: Note: The module is LGA package. Please be careful of the amount of solder paste. The module may be lifted due to excess solder. 6.2 Usage Condition Notes • Follow the conditions written in this specification, especially the recommended condition ratings about the power supply applied to this product. • The supply voltage has to be free of AC ripple voltage (for example from a battery or a low noise regulator output).
MK11A Bluetooth Module Datasheet 6.3 Storage Notes • The module should not be stressed mechanically during storage. • Do not store these products in the following conditions or the performance characteristics of the product, such as RF performance will be adversely affected: o Storage in salty air or in an environment with a high concentration of corrosive gas. o Storage in direct sunlight o Storage in an environment where the temperature may be outside the range specified.
MK11A Bluetooth Module Datasheet Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.1 Antennas The MK11A is an BLE Module beams signals and communicates with its antenna, which is PCB Antenna . Antenna could not be in no-load state when module is working. During debugging, it is suggested to add 50 ohms load to the antenna port to avoid damage or performance degradation of the module under long-time no-load condition.
MK11A Bluetooth Module Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 Datasheet 2.2 List of applicable FCC rules The Bluetooth Low Energy Module is an BLE Module with digitally modulated systems using an GFSK modulation. It operates on the 2402- 2480MHz band.Complies with FCC CFR Title 47 Part 15 Subpart C Section 15.247. 2.
MK11A Bluetooth Module Datasheet In the user manual of the end product, the end user has to be informed to keep at least 5mm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio‐ frequency exposure guidelines for an uncontrolled environment can be satisfied. The end user has to also be informed that any changes or modifications not expressly approved by the manufacturer could void the user's authority to operate this equipment.