Datasheet MK07 Bluetooth Module Datasheet MK07 Bluetooth Module （MK07A、MK07B） Datasheet MOKO TECHNOLOGY LTD. MOKO TECHNOLOGY LIMITED Version 1.2 www.mokoblue.
Contents 1. Product Instruction 1 1.1 Model Classification 1 1.2 Key Features 2 1.3 Applications 3 1.4 Product Specifications 4 2. Circuit Design 6 2.1 Block Diagram 6 2.2 Reference Circuitry 6 2.2.1 Normal Voltage Mode 6 2.2.2 High Voltage Mode 7 2.2.3 USB Voltage Mode 7 3. Mechanical specifications 8 3.1 Module Mechanical Dimensions 8 3.2 Recommended PCB land pads 9 4. Pin Assignment 10 5. Mounting Suggestion 13 6. Qualification and approvals 15 6.
7. Cautions 19 7.1 Reflow Soldering 19 7.2 Usage Condition Notes 20 7.3 Storage Notes 21 Revision History 21 www.mokoblue.
MK07 Bluetooth Module Datasheet 1. Product Instruction MK07 series is a powerful, highly flexible, ultra low power Bluetooth® 5.1 module based on worldleading Nordic® Semiconductor nRF52833 SoC solution, which has a 32bit Arm® Cortex™-M4 CPU with floating point unit running at 64MHz. MK07 series is capable of the latest and greatest features of Bluetooth® 5.1, the most prominent being Direction Finding1, taking Bluetooth positioning to new heights.
MK07 Bluetooth Module Datasheet 1.2 Key Features • Bluetooth® 5 • o Direction Finding o 2Mbps o CSA#2 o Advertising Extensions o Long Range IEEE 802.15.4 radio support o • Thread Supported data rates o Bluetooth®: 2 Mbps, 1 Mbps, 500 kbps, and 125 kbps o IEEE 802.15.4-2006: 250 kbps o Proprietary 2.4 GHz: 2 Mbps, 1 Mbps • Wide supply voltage range: 1.7 V to 5.
MK07 Bluetooth Module Datasheet 1.3 Applications • Internet of things (IoT) • o Smart home sensors and controllers o Industrial IoT sensors and controllers Advanced wearables • o Health/fitness sensor and monitor devices o Wireless payment enabled devices Advanced computer peripherals and I/O devices • o Mouse o Keyboard o Multi-touch trackpad Interactive entertainment devices 3 o Remote controls o Gaming controllers www.mokoblue.
MK07 Bluetooth Module Datasheet 1.
MK07 Bluetooth Module Datasheet Detail Description Mechanical design Dimensions Package Length: 21mm±0.2mm Width: 13.8mm±0.2mm Height: 2.3mm+0.1mm/-0.
MK07 Bluetooth Module Datasheet 2. Circuit Design 2.1 Block Diagram 2.2 Reference Circuitry 2.2.1 Normal Voltage Mode 6 www.mokoblue.
MK07 Bluetooth Module Datasheet 2.2.2 High Voltage Mode 2.2.3 USB Voltage Mode 7 www.mokoblue.
MK07 Bluetooth Module Datasheet 3. Mechanical specifications 3.1 Module Mechanical Dimensions 8 Symbol Min. Typ. Max. Length -0.2mm 21mm +0.2mm Width -0.2mm 13.8mm +0.2mm Height (PCB only) -0.08mm 0.8mm +0.08mm Height (with shield) -0.15mm 2.3mm +0.1mm www.mokoblue.
MK07 Bluetooth Module Datasheet 3.2 Recommended PCB land pads MK07 PCB land pads (TOP View) 9 Symbol Typ. Half-hole Pad (Bottom) 0.8mm x 0.8mm LGA Square Pad 0.8mm x 0.6mm LGA Round pad 1mm (diameter) Diameter of Half-hole 0.55mm www.mokoblue.
MK07 Bluetooth Module Datasheet 4. Pin Assignment MK07 module pin diagram (Rear View) Pin No. Name Type Description 1 P0.25 Digital I/O General purpose I/O 2 P0.23 Digital I/O General purpose I/O 3 P0.03 Digital I/O General purpose I/O AIN1 Analog input 1 SAADC/COMP/LPCOMP input P0.02 Digital I/O General purpose I/O AIN0 Analog input 0 SAADC/COMP/LPCOMP input P0.28 Digital I/O General purpose I/O AIN4 Analog input 4 SAADC/COMP/LPCOMP input P0.
MK07 Bluetooth Module Datasheet Pin No. Name Type Description 13 P0.04 Digital I/O General purpose I/O AIN2 Analog input 2 SAADC/COMP/LPCOMP input 14 P0.06 Digital I/O General purpose I/O 15 P0.05 Digital I/O General purpose I/O AIN3 Analog input 3 SAADC/COMP/LPCOMP input 16 P0.08 Digital I/O General purpose I/O 17 P0.09 Digital I/O General purpose I/O NFC1 NFC input NFC antenna connection P0.
MK07 Bluetooth Module Datasheet Pin No. Name Type Description 44 P1.09 Digital I/O General purpose I/O TRACEDATA[3] Trace data Trace buffer TRACEDATA 45 VBUS Power 5 V input for USB 3.3 V regulator 46 D- USB USB D- 47 D+ USB USB D+ 48 GND Power Ground 49 P1.00 Digital I/O General purpose I/O TRACEDATA[0]/ SWO Trace data Trace buffer TRACEDATA/ Serial wire output 50 P1.01 Digital I/O General purpose I/O 51 P1.02 Digital I/O General purpose I/O 52 P1.
MK07 Bluetooth Module Datasheet 5. Mounting Suggestion You can refer to the following references for the mounting design of the module with on-board antenna (MK07A with PCB antenna). For external antenna modules (MK07B needs to connect an external antenna to the u.FL connector), you need to refer to the external antenna design requirements.
MK07 Bluetooth Module Datasheet Other module mounting examples: Placement of resin or plastic parts: Placement of metal parts • Minimum safe distance for metal parts without seriously compromising the antenna (tuning) is 40 mm top/bottom and 30 mm left or right. • Metal close to the module antenna (bottom, top, left, right, any direction) will have degradation on the antenna performance.
MK07 Bluetooth Module Datasheet 6. Qualification and approvals 6.1 United States (FCC) The MK07 has received Federal Communications Commission (FCC) CFR47 Telecommunications, Part 15 Subpart C “Intentional Radiators” modular approval in accordance with Part 15.247 Modular Transmitter approval.
MK07 Bluetooth Module Datasheet co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter guidelines. End users must be provided with transmitter operating conditions for satisfying RF Exposure compliance. 6.2 Canada (ISED) The MK07 module is certified for use in Canada under Innovation, Science and Economic Development Canada (ISED) Radio Standards Specification (RSS) RSS-247 and RSSGen. 6.2.
MK07 Bluetooth Module Datasheet 6.2.2 RF exposure All transmitters regulated by IC must comply with RF exposure requirements listed in RSS-102 - Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands). This module is approved for installation into mobile and/or portable host platforms and must not be colocated or operating in conjunction with any other antenna or transmitter except in accordance with Industry Canada's multi-transmitter guidelines.
MK07 Bluetooth Module Datasheet The MK07 module is labeled with its assigned technical conformity mark and certification number. The end product in which this module is being used must have an external label referring to the type certified module inside: Contains transmitter module with certificate number: 217-204181 6.5 Australia / New Zealand (RCM) The MK07 has been tested to comply with the AS/NZS 4268:2017, Radio equipment and systems Short range devices - Limits and methods of measurement.
MK07 Bluetooth Module Datasheet 7. Cautions 7.1 Reflow Soldering Reflow soldering is a vitally important step in the SMT process. The temperature curve associated with the reflow is an essential parameter to control to ensure the correct connection of parts. The parameters of certain components will also directly impact the temperature curve selected for this step in the process.
MK07 Bluetooth Module Datasheet Example of MOKO SMT reflow soldering: Note: The module is LGA package. Please be careful of the amount of solder paste. The module may be lifted due to excess solder. 7.2 Usage Condition Notes • Follow the conditions written in this specification, especially the recommended condition ratings about the power supply applied to this product. • The supply voltage has to be free of AC ripple voltage (for example from a battery or a low noise regulator output).
MK07 Bluetooth Module Datasheet 7.3 Storage Notes • The module should not be stressed mechanically during storage. • Do not store these products in the following conditions or the performance characteristics of the product, such as RF performance will be adversely affected: o Storage in salty air or in an environment with a high concentration of corrosive gas. o Storage in direct sunlight o Storage in an environment where the temperature may be outside the range specified.
MK07 Bluetooth Module Datasheet Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.1 Antennas The Bluetooth Low Energy Module is an BLE Module beams signals and communicates with its antenna, which is PCB Antenna and External 2.4Ghz antenna. Antenna could not be in no-load state when module is working.
MK07 Bluetooth Module Datasheet Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules The Bluetooth Low Energy Module is an BLE Module with digitally modulated systems using an GFSK modulation. It operates on the 2402- 2480MHz band. Complies with FCC CFR Title 47 Part 15 Subpart C Section 15.247. 2.
MK07 Bluetooth Module Datasheet tool. OEM shall not supply any tool or info to the end‐ user regarding to Regulatory Domain change. USERS MANUAL OF THE END PRODUCT: In the user manual of the end product, the end user has to be informed to keep at least 5mm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio‐ frequency exposure guidelines for an uncontrolled environment can be satisfied.
