Datasheet MK06 Bluetooth Module Datasheet MK06 Bluetooth Module (MK06A、MK06B) Datasheet MOKO TECHNOLOGY LTD. Version 1.2 www.mokoblue.
Contents 1. Product Instruction 1 1.1 Model Classification 1 1.2 Key Features 2 1.3 Applications 3 1.4 Product Specifications 4 2. Block Diagram 6 3. Mechanical specifications 7 3.1 Module Mechanical Dimensions 7 3.2 Recommended PCB land pads 8 4. Pin Assignment 9 5. Mounting Suggestion 11 6. Qualification and approvals 13 6.1 United States (FCC) 13 6.1.1 Labeling and user information requirements 13 6.1.2 RF exposure 13 6.2 Canada (ISED) 14 6.2.
MK06 Bluetooth Module Datasheet 1. Product Instruction MK06 series is a powerful, highly flexible, ultra low power Bluetooth® 5.1 module based on Nordic® Semiconductor nRF52811 SoC solution, which has a 32bit Arm® Cortex™-M4 CPU with floating point unit running at 64MHz. MK06 is capable of the latest and greatest features of Bluetooth® 5.1, the most prominent being Direction Finding1, taking Bluetooth positioning to new heights. MK06 supports an extensive range of wireless protocols.
MK06 Bluetooth Module Datasheet 1.2 Key Features • Bluetooth 5 o Direction Finding o 2Mbps o CSA#2 o Advertising Extensions o Long Range • IEEE 802.15.4 radio support • Supported data rates o Bluetooth®: 2Mbps, 1Mbps, 500kbps, and 125kbps o IEEE 802.15.4-2006: 250 kbps o Proprietary 2.4 GHz: 2 Mbps, 1 Mbps • Wide supply voltage range: 1.7 V to 3.
MK06 Bluetooth Module Datasheet 1.
MK06 Bluetooth Module Datasheet 1.4 Product Specifications Detail Description Bluetooth Feature Bluetooth® Low Energy Direction Finding 2M LE PHY 1M LE PHY Coded LE PHY (Long Range) Advertising Extensions CSA #2 Security AES-128 LE connections Concurrent peripheral and broadcaster roles Radio Frequency 2402MHz - 2480MHz Modulations GFSK at 1Mbps, 2Mbps, 250kbps (IEEE 802.15.
MK06 Bluetooth Module Datasheet Detail Description System ON mode, no RAM retention, wake on RTC(3V) Mechanical design 1.4uA Dimensions Package Length: 21mm±0.2mm Width: 13.8mm±0.2mm Height: 2.3mm+0.1mm/-0.
MK06 Bluetooth Module Datasheet 2. Block Diagram 6 www.mokoblue.
MK06 Bluetooth Module Datasheet 3. Mechanical specifications 3.1 Module Mechanical Dimensions 7 Symbol Min. Typ. Max. Length -0.2mm 21mm +0.2mm Width -0.2mm 13.8mm +0.2mm Height (PCB only) -0.08mm 0.8mm +0.08mm Height (with shield) -0.15mm 2.3mm +0.1mm www.mokoblue.
MK06 Bluetooth Module Datasheet 3.2 Recommended PCB land pads MK06 PCB land pads (TOP View) 8 Symbol Typ. Half-hole Pad (Bottom) 0.8mm x 0.8mm LGA Round Pad 1mm (diameter) Diameter of Half-hole 0.55mm www.mokoblue.
MK06 Bluetooth Module Datasheet 4. Pin Assignment MK06 module pin diagram (Rear View) Pin No.
MK06 Bluetooth Module Datasheet Pin No.
MK06 Bluetooth Module Datasheet 5. Mounting Suggestion You can refer to the following references for the mounting design of the module with on-board antenna (MK06A with PCB antenna). For external antenna modules (MK06B needs to connect an external antenna to the u.FL connector), you need to refer to the external antenna design requirements.
MK06 Bluetooth Module Datasheet Other module mounting examples: Placement of resin or plastic parts: Placement of metal parts • Minimum safe distance for metal parts without seriously compromising the antenna (tuning) is 40 mm top/bottom and 30 mm left or right. • Metal close to the module antenna (bottom, top, left, right, any direction) will have degradation on the antenna performance.
MK06 Bluetooth Module Datasheet 6. Qualification and approvals 6.1 United States (FCC) The MK06 has received Federal Communications Commission (FCC) CFR47 Telecommunications, Part 15 Subpart C “Intentional Radiators” modular approval in accordance with Part 15.247 Modular Transmitter approval.
MK06 Bluetooth Module Datasheet co-located or operating in conjunction with any other antenna or transmitter except in accordance with FCC multi-transmitter guidelines. End users must be provided with transmitter operating conditions for satisfying RF Exposure compliance. 6.2 Canada (ISED) The MK06 module is certified for use in Canada under Innovation, Science and Economic Development Canada (ISED) Radio Standards Specification (RSS) RSS-247 and RSSGen. 6.2.
MK06 Bluetooth Module Datasheet 6.2.2 RF exposure All transmitters regulated by IC must comply with RF exposure requirements listed in RSS-102 - Radio Frequency (RF) Exposure Compliance of Radiocommunication Apparatus (All Frequency Bands). This module is approved for installation into mobile and/or portable host platforms and must not be colocated or operating in conjunction with any other antenna or transmitter except in accordance with Industry Canada's multi-transmitter guidelines.
MK06 Bluetooth Module Datasheet The MK06 module is labeled with its assigned technical conformity mark and certification number. The end product in which this module is being used must have an external label referring to the type certified module inside: Contains transmitter module with certificate number: 217-204180 6.5 Australia / New Zealand (RCM) The MK06 has been tested to comply with the AS/NZS 4268:2017, Radio equipment and systems Short range devices - Limits and methods of measurement.
MK06 Bluetooth Module Datasheet 7. Cautions 7.1 Reflow Soldering Reflow soldering is a vitally important step in the SMT process. The temperature curve associated with the reflow is an essential parameter to control to ensure the correct connection of parts. The parameters of certain components will also directly impact the temperature curve selected for this step in the process.
MK06 Bluetooth Module Datasheet Example of MOKO SMT reflow soldering: Note: The module is LGA package. Please be careful of the amount of solder paste. The module may be lifted due to excess solder. 7.2 Usage Condition Notes • Follow the conditions written in this specification, especially the recommended condition ratings about the power supply applied to this product. • The supply voltage has to be free of AC ripple voltage (for example from a battery or a low noise regulator output).
MK06 Bluetooth Module Datasheet 7.3 Storage Notes • The module should not be stressed mechanically during storage. • Do not store these products in the following conditions or the performance characteristics of the product, such as RF performance will be adversely affected: o Storage in salty air or in an environment with a high concentration of corrosive gas. o Storage in direct sunlight o Storage in an environment where the temperature may be outside the range specified.
MK06 Bluetooth Module Datasheet Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.1 Antennas The MK06 is an BLE Module beams signals and communicates with its antenna, which is PCB Antenna and External 2.4Ghz FPC antenna. Antenna could not be in no-load state when module is working. During debugging, it is suggested to add 50 ohms load to the antenna port to avoid damage or performance degradation of the module under long-time no-load condition.
MK06 Bluetooth Module Datasheet Integration instructions for host product manufacturers according to KDB 996369 D03 OEM Manual v01 2.2 List of applicable FCC rules The Bluetooth Low Energy Module is an BLE Module with digitally modulated systems using an GFSK modulation. It operates on the 2402- 2480MHz band.Complies with FCC CFR Title 47 Part 15 Subpart C Section 15.247. 2.
MK06 Bluetooth Module Datasheet tool. OEM shall not supply any tool or info to the end‐ user regarding to Regulatory Domain change. USERS MANUAL OF THE END PRODUCT: In the user manual of the end product, the end user has to be informed to keep at least 5mm separation with the antenna while this end product is installed and operated. The end user has to be informed that the FCC radio‐ frequency exposure guidelines for an uncontrolled environment can be satisfied.