H4 Series Beacon (H4) Datasheet MOKO TECHNOLOGY LIMITED www.mokosmart.
[TOC] 1. Description H4 is a portable tag with temperature & humidity sensor ① and 3-axis accelerometer sensor ② . It can advertise iBeacon, Eddystone and Sensor datas and also can transfer and store temperature & humidity sensor datas. H4 has a portable case shape, waterproof structure, accurate hardware, robust firmware and external push button. It has a long lifetime with 2 high quality replaceable AAA lithium batteries. All the parameters of H4 can be modified and all the sensor datas can be checked.
Control the device to start advertising all the time, stop advertising, or advertise for a while. Transmission Power Levels 9 adjustable grades; Transmission power range: -40dBm to +0.59dBm. Long Range The max. Range 120 meters in the open space; The range depends on the environment where the H4 series Beacon is placed. Security Configurable password (1-16 characters); With or without password (Lock/Unlock parameters); AES-128-ECB. encrypt.
Battery Model 2xAAA Battery Lithium battery,1.5V,1100mAh Battery Lifetime About 36 mouths At default settings③ and without selfdischarge factor Operation Voltage 1.8~3.6V DC Waterproof Level IP66 - Static Current 11.7 uA Device is power off Average Current 41.2 uA At default settings④ Transmission Range 120m Maximum,in the open space Antenna 50ohm On board/PCB Antenna Size 69.90mmx32.15mmx18.15mm Refer to mechanical draws for details Net Weight 33.
Stop advertising for a while(1~65535s) 2.Button triple tap - Always advertise Start advertising for a while(1~65535s) Stop advertising for a while(1~65535s) 3.Temperature above - Start advertising Stop advertising 4.Temperature below - Start advertising Stop advertising 5.Humidity above - Start advertising Stop advertising 6.Humidity below - Start advertising Stop advertising 7.
Item Temperature Humidity Range Typical Accuracy Tolerance 0℃~65℃ ±0.3℃ -40℃~0℃ or 65℃~120℃ ±0.7℃ 10%~90% ±3% 0%~10% or 90%~100% ±4.
[========] 6. Mechanical Draws All dimensions is mm.
[========] 7.FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Revision History Revision Description Approved V1.0 Initial Release Kevin Date 2019.07.