H2-BeaconX Pro Datasheet MOKO TECHNOLOGY LTD. www.mokosmart.
1. Description The H2-BeaconX Pro is a portable tag with 3-axis accelerometer sensor① ,which can advertise iBeacon, Eddystone and Sensor datas. It has a portable case shape, waterproof structure, accurate hardware, robust firmware and external push button . All the parameters of H2-BeaconX Pro can be modified and all the sensor datas can be checked. Please check out our BeaconX Pro app, available for iOS and Android. ① 3-axis accelerometer Sensor: STMicroelectronics® LIS3DH 2.
The max. Range 150 meters in the open space; The range depends on the physical environment. Security Configurable password (1-16 characters); With or without password (Lock/Unlock parameters); AES-128-ECB. encrypt. LED reminder Press and hold the button for 3s, the red LED flashes for 3s, indicating that the device is turned on, and the red LED stays on for 3s, indicating that the device is turned off.
Size Φ48*14.7mm Refer to mechanical draws for details Net Weight 24g With battery Operating Temperature -25 to +60ºC - Storage Temperature 20 to +30ºC - Certifications FCC/CE - ②③ Default setting: 1 Active SLOT(Device Info),0dBm TX power and 1000ms Advertising Interval. 4.
Output data rate 10 Hz 1 Hz,10 Hz,25 Hz,50 Hz,100 Hz Sensitivity 7 7 to 255 5. mechanical draws **All units is mm ** 6.FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2.
equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction. 7. Technical support Item File Name Link Configure APP for IOS&Android BeaconX Pro -- User Manual BeaconX Pro User Manual http://doc.mokotechnology.com/index.
H2A-BeaconX Pro Datasheet MOKO TECHNOLOGY LTD. www.mokosmart.
1. Description The H2A-BeaconX Pro is a portable tag with 3-axis accelerometer sensor ① ,which can advertise iBeacon, Eddystone and Sensor datas. It has a portable case shape, waterproof structure, accurate hardware, robust firmware and external push button . All the parameters of H2A-BeaconX Pro can be modified and all the sensor datas can be checked. Please check out our BeaconX Pro app, available for iOS and Android. ① 3-axis accelerometer Sensor: STMicroelectronics® LIS3DH 2.
The max. Range 150 meters in the open space; The range depends on the physical environment. Security Configurable password (1-16 characters); With or without password (Lock/Unlock parameters); AES-128-ECB. encrypt. LED reminder Press and hold the button for 3s, the red LED flashes for 3s, indicating that the device is turned on, and the red LED stays on for 3s, indicating that the device is turned off.
Size Φ48*14.7mm Refer to mechanical draws for details Net Weight 24g With battery Operating Temperature -25 to +60ºC - Storage Temperature 20 to +30ºC - Certifications FCC/CE - ②③ Default setting: 1 Active SLOT(Device Info),0dBm TX power and 1000ms Advertising Interval. 4.
Output data rate 10 Hz 1 Hz,10 Hz,25 Hz,50 Hz,100 Hz Sensitivity 7 7 to 255 5.
6.FCC STATEMENT 1. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. (2) This device must accept any interference received, including interference that may cause undesired operation. 2. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.